

Nuclone devboard small 4 layer
Kicad templates that I use regularly
- Size
- 50 × 50 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 42
- Nets
- 53
- Pads
- 248
- Tracks, vias
- 203, 33
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 19 Nov 2017
- Updated
- 15 Oct 2025
Overview
Nuclone devboard small 4 layer is an open-source printed circuit board by Squantor, from the Squantor/templates_kicad repository on GitHub, published under the MIT licence. It is a 4-layer board of 50 × 50 mm with 42 parts on 53 nets, routed with 203 tracks and 33 vias.
It is built around the TPESD0504C6 and TYPE-C-31-M-12. Its parts include 10 resistors, 7 capacitors, 4 connectors, 2 ICs and 2 switches. It belongs with the microcontroller boards boards of this library.
Main components
2TPESD0504C6
SOT-3631.3pF 5V 5uA 9V 9V ESD Four channels IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 SOT-363 ESD and Surge Protection (TVS/ESD) ROHSTECH PUBLICESD And Surge Protection (TVS/ESD)TYPE-C-31-M-12
SMD-30℃~+80℃ 1 10,000 cycles 16P 20V 5A 7.35mm Female Surface Mount, Right Angle Type-C SMD USB Connectors ROHSHRO ElectronicsUSB Connectors
README
Aisler_simple_2_layer/README.md$(HARDWARE_PROJECT) project
Project description goes here.
HSI (Hardware Software Interface)
This applies to a project that has a embedded software component. Describe what each pin/bus does, what it is connected to, what its function is and some "safe" behaviour when starting up.
TODO's
Still some things need to be done:
- Fill in this project description
- schematic entry
- PCB layout
- Review with one night in between
- Produce at Aisler
- Assemble
- Test & characterise
- update Readme.md with pictures and BOM
BOM
This is a list of hardware components. If just mentioned a generic component like a 1K 0402 resistor, just name it as such, free to substitute. If you need some special integrated IC's show some sources like Mouser, Digikey, Farnell, or LCSC
- Generic resistor in 0402 housing with a value
- Generic capacitor in 0603 housing with a value
- Special IC from LCSC
Pictures

Parts
42| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 47K | SquantorRcl:R_0402_hand | R2, R3, R4, R5, R6 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H1, H2, H3, H4 |
| 2 | 10u | SquantorRcl:C_0603 | C1, C2 |
| 2 | 1u | SquantorRcl:C_0402 | C3, C4 |
| 2 | 5.1K | SquantorRcl:R_0402_hand | R1, R7 |
| 1 | 0.5A | SquantorRcl:F_0603_hand | F1 |
| 1 | 100 | SquantorRcl:R_0402_hand | R13 |
| 1 | 100n | SquantorRcl:C_0805 | C9 |
| 1 | 10K | SquantorRcl:R_0402_hand | R8 |
| 1 | 10n | SquantorRcl:C_0402 | C14 |
| 1 | 1K | SquantorRcl:R_0402_hand | R14 |
| 1 | 1u | SquantorRcl:C_0603 | C17 |
| 1 | 600 | SquantorRcl:L_0603 | FB1 |
| 1 | Bootloader | SquantorSwitches:TD-85XU | SW2 |
| 1 | GREEN | SquantorDiodes:LED_0603_hand | D2 |
| 1 | JLCJLCJLCJLC | SquantorLabels:Label_Generic | N3 |
| 1 | JTAG_2X05 | SquantorConnectors:Header-0127-2X05-H006 | J1 |
| 1 | MCP1702-MB | SquantorIC:SOT89-NXP | U1 |
| 1 | NuClone Small template V1.5 | SquantorLabels:Label_Generic | N4 |
| 1 | Nuclone Template 20220530 | SquantorLabels:Label_Generic | N5 |
| 1 | OHWLOGO | Symbol:OSHW-Symbol_6.7x6mm_SilkScreen | N1 |
| 1 | RESET | SquantorSwitches:TD-85XU | SW1 |
| 1 | Reset | SquantorTestPoints:TestPoint_hole_H04R07 | TP5 |
| 1 | SWDCLK | SquantorTestPoints:TestPoint_hole_H04R07 | TP2 |
| 1 | SWDIO | SquantorTestPoints:TestPoint_hole_H04R07 | TP1 |
| 1 | TPESD0504C6 | SquantorIC:SOT363-ONsemi | U2 |
| 1 | TYPE-C-31-M-12 | SquantorUsb:USB-C-HRO-31-M-12 | J2 |
| 1 | V20220530 | SquantorLabels:Label_Generic | N2 |
| 1 | VSS | SquantorTestPoints:TestPoint_hole_H05R10 | TP3 |
| 1 | button | SquantorTestPoints:TestPoint_hole_H04R07 | TP4 |
| 1 | nuclone_small_left | SquantorConnectorsNamed:nuclone_small_left_stacked | J3 |
| 1 | nuclone_small_right | SquantorConnectorsNamed:nuclone_small_right_stacked | J4 |
More from Squantor/templates_kicad
12- 2 layers90 × 98 mm

- 2 layers50 × 50 mm

Nuclone expansion small UART+proto
Squantor/templates_kicad
Kicad templates that I use regularly
54 parts24MIT - 2 layers50 × 76.2 mm

Nuclone devboard medium 2 layer USB C UART
Squantor/templates_kicad
Kicad templates that I use regularly
46 parts24MIT - 2 layers50 × 50 mm

Nuclone expansion small 2 layer
Squantor/templates_kicad
Kicad templates that I use regularly
44 parts24MIT - 2 layers90 × 98 mm

- 2 layers50 × 50 mm

Nuclone devboard small 2 layer USB C data
Squantor/templates_kicad
Kicad templates that I use regularly
41 parts24MIT - 2 layers90 × 98 mm

- 2 layers50 × 76.2 mm

Nuclone devboard medium 2 layer USB C PD
Squantor/templates_kicad
Kicad templates that I use regularly
39 parts24MIT - 2 layers50 × 76.2 mm

Nuclone devboard medium 2 layer USB C data
Squantor/templates_kicad
Kicad templates that I use regularly
36 parts24MIT - 4 layers44 × 29 mm

Hammond 1551G OSH2L devboard
Squantor/templates_kicad
Kicad templates that I use regularly
6 parts24MIT - 2 layers78.1 × 41.9 mm

- 2 layers88.2 × 46.2 mm

Similar boards
- 2 layers50 × 50 mm

Nuclone LPC804M101JHI33
Squantor/squantorDevelBoards
Various development boards/test for microcontrollers, check for breakouts here
48 parts1MIT - 2 layers50 × 50 mm

- 2 layers208.8 × 396.9 mm

Ferris
pierrechevalier83/ferris
A low profile split keyboard designed to satisfy one single use case elegantly
145 parts1.3k - 4 layers38 × 39 mm

CLN17-V1.5
creapunk/CLN-ClosedLoopNemaDriver
Compact closed-loop stepper motor driver designed for NEMA motors
103 parts1.1k - 2 layers42 × 67 mm

- 2 layers181 × 97 mm

OpenDeck r3.1.2
shanteacontrols/OpenDeck
A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.
262 parts960Apache-2.0 - 4 layers86 × 34 mm

Bsl drv v1
jackw01/scanlight
A better light source for scanning color negative film
157 parts397CERN-OHL-W-2.0 - 6 layers55 × 95 mm

Questions
How big is the Nuclone devboard small 4 layer PCB?
It measures 50 × 50 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Nuclone devboard small 4 layer use?
42 parts, built around the TPESD0504C6 and TYPE-C-31-M-12. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Nuclone devboard small 4 layer KiCad files?
From the Squantor/templates_kicad repository on GitHub, at the commit this page was made from: the board is nuclone_devboard_small_4_layer/nuclone_devboard_small_4_layer.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Nuclone devboard small 4 layer design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).