Skip to the content
4 layers200 × 97.5 mmTesla Coil, the printed circuit board in 3D

PCB boards designed with ESP32

Size
200 × 97.5 mm
Copper layers
4
Thickness
4.69 mm
Parts
37
Nets
38
Pads
105
Tracks, vias
33, 5
Pours
3
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
13 Jul 2019
Updated
24 Oct 2026

Overview

Tesla Coil is an open-source printed circuit board by sPyOpenSource, from the sPyOpenSource/ESP32-PCB repository on GitHub, published under the MIT licence. It is a 4-layer board of 200 × 97.5 mm with 37 parts on 38 nets, routed with 33 tracks and 5 vias.

It is built around the IRFIZ44NPBF. Its parts include 11 capacitors, 9 resistors, 7 connectors, 2 diodes and 2 transistors. It belongs with the robots and motor control boards and the ESP32 boards of this library.

Main components

1

README

README.md

ESP32-PCBs

Those PCB boards are designed with ESP32. E,g, mini drone, rc car, solar controller, etc.

Mini Drone Project

It has 4 Motor Controller for Mini Drone with Wireless Connections.

RC Car Project

2 Motor Controller for RC Car with Wireless Connections. An RC car is a type of remote-controlled vehicle that can be driven by using a radio transmitter or a smartphone app. RC cars can have different sizes, shapes, designs, and features, depending on their purpose and performance. Some RC cars are made for racing, while others are made for off-road, drifting, crawling, or bashing.

Solar Charger Project

It is the voltage regulator for solar panels for charging and output.

Goals

The project aims to develop reusable ESP32 PCB designs for:

  1. Robotics
  2. RC vehicles
  3. Drones
  4. Solar energy systems
  5. Embedded control
  6. IoT applications

License

See the individual project files and repository license for details.

Parts

37
QtyValueFootprintReferences
5220uFESP32-footprints-Lib:Cpol-6.3x7.7C6, C6, C6, C6, C6
40.1uFdigikey-footprints:0603C1, C2, C3, C7
310kdigikey-footprints:0603R1, R4, R9
3560Rdigikey-footprints:0603R2, R6, R10
10.005Rdigikey-footprints:0603R3
1100Rdigikey-footprints:0603R5
1100uFESP32-footprints-Lib:Cpol-6.3x7.7C4
11nFdigikey-footprints:0603C5
1220Rdigikey-footprints:0603R7
133uHESP32-footprints-Lib:7447779139L3
15Vdigikey-footprints:1210J5
1BATTERY_INPUTdigikey-footprints:1210J6
1BATTERY_OUTPUTdigikey-footprints:1210J7
1COMMSdigikey-footprints:0603D1
1D_Schottkydigikey-footprints:DO-214ACD2
1GPIOESP32-footprints-Lib:PIN2RX1
1IRFIZ44Ndigikey-footprints:SOT-223Q4
1LeftESP32-footprints-Lib:PIN16J3
1Q_NPN_BCEESP32-footprints-Lib:DpakQ1
1RightESP32-footprints-Lib:PIN16J4
1SOLAR_INPUTdigikey-footprints:1210J1
1SOLAR_OUTPUTdigikey-footprints:1210J2

The 33 most common of 37 parts.

More from sPyOpenSource/ESP32-PCB

5
  • 4 layers40.1 × 38.1 mmCrazyflie contol board, the printed circuit board in 3D

    Crazyflie contol board

    sPyOpenSource/ESP32-PCB

    PCB boards designed with ESP32

    98 parts8MIT
  • 4 layers39 × 59 mmBLDC 4, the printed circuit board in 3D

    BLDC 4

    sPyOpenSource/ESP32-PCB

    PCB boards designed with ESP32

    70 parts8MIT
  • 2 layers79 × 77 mmSolar, the printed circuit board in 3D

    Solar

    sPyOpenSource/ESP32-PCB

    PCB boards designed with ESP32

    40 parts8MIT
  • 2 layers66.5 × 87.4 mmFietslamp, the printed circuit board in 3D

    Fietslamp

    sPyOpenSource/ESP32-PCB

    PCB boards designed with ESP32

    21 parts8MIT
  • 2 layers48.8 × 40.1 mmMinikame, the printed circuit board in 3D

    Minikame

    sPyOpenSource/ESP32-PCB

    PCB boards designed with ESP32

    16 parts8MIT

Similar boards

  • 2 layers81.5 × 61.5 mmMTTP Charge Controller, the printed circuit board in 3D

    MTTP Charge Controller

    Jocelynsparx/MPPT-Charge-Controller

    Arduino Nano 12V MPPT Charge Controller

    41 parts4
  • 4 layers40 × 23 mmPixl.js, the printed circuit board in 3D

    Pixl.js

    solosky/pixl.js

    An emulator for Amiibo!

    37 parts1.4kGPL-2.0
  • 4 layers23 × 32 mmDoorman slot, the printed circuit board in 3D

    Doorman slot

    AzonInc/Doorman

    ESP32-S3 based Intercom Gateway (TCS / Koch / Niko / Scantron / Analogue Systems)

    37 parts252GPL-3.0
  • 4 layers36.8 × 24.1 mmAttenuator, the printed circuit board in 3D

    Attenuator

    loxodes/vna

    Under development open hardware microwave vector network analyzer

    37 parts205
  • 4 layers24 × 15.8 mmBose qc35-usb c, the printed circuit board in 3D

    Bose qc35-usb c

    jamesturton/bose-qc35-usb-c

    A hardware mod to use USB-C on the Bose QC 35

    37 parts171
  • 4 layers81.5 × 134.5 mmMain PCB, the printed circuit board in 3D

    Main PCB

    Xii-Labs/Xii-Boy-Ultra

    The world's first wire-free Wii portable, now in the palm of your hands. Better than ever, optimized to delight, built for fun. The next generation of Wii portables starts now.

    37 parts104CERN-OHL-S-2.0
  • 4 layers35 × 16 mmBitmagic basic, the printed circuit board in 3D

    Bitmagic basic

    esden/bitmagic

    Open Source Logic Analyzers and data Syphons

    37 parts92
  • 4 layers27.4 × 17 mmMIG Flashcart, the printed circuit board in 3D

    MIG Flashcart

    sabogalc/MIG-Flash-PCBs

    MIG Dumper and Flashcart PCB files in KiCad

    37 parts69WTFPL

Questions

How big is the Tesla Coil PCB?

It measures 200 × 97.5 mm and has 4 copper layers, 4.69 mm thick.

What parts does the Tesla Coil use?

37 parts, built around the IRFIZ44NPBF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Tesla Coil KiCad files?

From the sPyOpenSource/ESP32-PCB repository on GitHub, at the commit this page was made from: the board is TeslaCoil/Tesla_Coil.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Tesla Coil design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).