2 layers57 × 55.2 mm
LogicAnalyzer
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software
10 parts5.1kGPL-3.0
2 layers224.7 × 144.7 mm
E5 logger
spectraphilic/wsn_E5UiO Lora E5 logger hardware design
- Size
- 224.7 × 144.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 10
- Nets
- 59
- Pads
- 176
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 6 (file 20211014)
- Created
- 29 Jul 2022
- Updated
- 10 Nov 2022
Overview
E5 logger is an open-source printed circuit board by spectraphilic, from the spectraphilic/wsn_E5 repository on GitHub, published under the MIT licence. It is a 2-layer board of 224.7 × 144.7 mm with 10 parts on 59 nets.
Its parts include 4 ICs, 1 capacitor, 1 connector, 1 switch and 1 inductor. It belongs with the radio and wireless boards of this library.
README
README.mdwsn_E5
UiO Lora E5 logger hardware design
Electronic design of the Lora E5 Mini logger for RIOT firmware. The logger is designed for optimized power consumption, connectivity, and prioritizing data collection in remote and cold regions. The logger handles a variety of digital protocols (SDI-12, I2C, UART) to communication to sensors. Radio uses the LoRa protocol.
Open-source License MIT, see the file LICENSE
Logger V1
The designed is made out of commercial breakout boards. All break out are joined by a main PCB board using through-hole components. To open the files, use the open source software KiCad.
Development of the compatible RIOT firmware available on github at https://github.com/spectraphilic/wsn_riot.
Objectives for V1:
- complete a functional design
- deploy design in real conditions
- Iterate design and finalize a SMD PCB for V2
Resources
Parts
10| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | Adafruit_5V_1A_Step-up_TPS61023 | breakout_perso:Adafruit 5V step-up TPS61023 | P1 |
| 1 | Adafruit_MicoSD_breakout | breakout_perso:Adafruit microSD breakout | U1 |
| 1 | Adafruit_SHT31_Stemma | breakout_perso:Adafruit SHT31 Stemma | S1 |
| 1 | Adafruit_Solar_LiPo_USB_charger | breakout_perso:Adafruit_LiPo_Solar_charger | B1 |
| 1 | Grove_GPS_Air530 | breakout_perso:Grove_GPS_Air530 | U3 |
| 1 | Lemming_V3 | breakout_perso:Lemming v3 | L1 |
| 1 | Lora_E5_Mini | breakout_perso:LoRa E5 Mini | U2 |
| 1 | ON_OFF Board | breakout_perso:Adafruit SPT slider witch | U4 |
| 1 | SWD_male_connector | breakout_perso:SWD through-hole male connector | C1 |
The 9 most common of 10 parts.
Questions
How big is the E5 logger PCB?
It measures 224.7 × 144.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the E5 logger use?
10 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the E5 logger KiCad files?
From the spectraphilic/wsn_E5 repository on GitHub, at the commit this page was made from: the board is UiO_LoRa_E5_Mini_logger_v1/E5_logger.kicad_pcb and its schematic Lagopus_v3/Lagopus_v3.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the E5 logger design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers32.2 × 15.4 mm
Protector
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.
10 parts4.3kMIT - 2 layers14.4 × 10.1 mm
Q3Q SWAB A1-00 Temperature + Test Points + OPT3001
joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch
10 parts2.1k - 2 layers26 × 18 mm
- 2 layers44.3 × 30.5 mm
Lime2-SATA RevA
OLIMEX/OLINUXINO
OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C
10 parts1.5k - 2 layers150 × 50 mm
Breakout 55pin 963063-15-Connector
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
10 parts1.2k - 2 layers17.8 × 43.2 mm
Nano Adapter
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
10 parts1.1kGPL-3.0 - 2 layers53.9 × 23.2 mm
Buffer
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
10 parts1kGPL-3.0