

Modular eside rev14
Gyroscope Matrix Flashlight
- Size
- 95 × 65 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 92
- Nets
- 71
- Pads
- 314
- Tracks, vias
- 757, 114
- Pours
- 28
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 4 Apr 2018
- Updated
- 22 May 2018
Overview
Modular eside rev14 is an open-source printed circuit board by specs32, from the specs32/prolight repository on GitHub. It is a 2-layer board of 95 × 65 mm with 92 parts on 71 nets, routed with 757 tracks and 114 vias.
It is built around the ATMEGA32U4RC-MUR, LSM6DS3TR-C and MIC5205-3.3YM5, with the TP4056, DMN1004UFDF and LL4148 among its other parts. Its parts include 27 resistors, 18 capacitors, 11 diodes, 6 ICs and 6 transistors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
6ATMEGA32U4RC-MUR
VQFN-44-EP(7x7)-40℃~+85℃ 10bit 16MHz 1KB 2.5KB 2.7V~5.5V 26 32KB 8 Bit AVR Built-in FLASH VQFN-44-EP(7x7) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)LSM6DS3TR-C
LGA-14(2.5x3)-40℃~+85℃ 1.71V~3.6V 16bit 3uA 4KB IMU (accelerometer + gyroscope) SPI、I2C X,Y,Z X,Y,Z ±16g ±2000dps 运动事件检测、同步与时间戳 LGA-14(2.5x3) Accelerometers ROHSSTMicroelectronicsAccelerometersMIC5205-3.3YM5
SOT-23-5-40℃~+85℃@(Ta) 1 150mA 200mV@(50mA) 20V 2uA 3.3V 70dB@(1kHz) Fixed Over Current Protection、Over Temperature Protection Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTECH PUBLICVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsTP4056
ESOP-8-40℃~+85℃ 1 1A 35uA 4.2V 4V~6.5V Charging IC Lithium Battery Support Support 恒流充电、恒压充电、涓流充电、自动再充电、充电终止、可编程充电电流、软启动、欠压锁定 ESOP-8 Battery Management ROHSUMWBattery ManagementDMN1004UFDF
UDFN2020-6-55℃~+150℃ 1 N-channel 12V 15A 1V 2.1W 2.385nF 26nC 520pF 7mΩ@2.5V N-Channel UDFN2020-6 MOSFETs ROHSDiodes IncorporatedMOSFETsLL4148
LL-341 Independent 1V@10mA 200mA 4A 4ns 500mW 5uA@75V 75V LL-34 Switching Diodes ROHSMDDSwitching Diodes
README
README.mdprolight
Gyroscope Matrix Flashlight
click the wiki button in the menu above ! ;)
Parts
92| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 1KΩ | Resistors_SMD:R_0805_HandSoldering | R2, R3, R4, R5, R9, R12, R24 |
| 5 | 100nF | Capacitors_SMD:C_0603_HandSoldering | C5, C7, C10, C11, C18 |
| 4 | 10kΩ | Resistors_SMD:R_0805_HandSoldering | R7, R10, R11, R13 |
| 3 | 10KΩ | Resistors_SMD:R_0805_HandSoldering | R6, R19, R20 |
| 3 | 10µF | Capacitors_SMD:C_0805_HandSoldering | C1, C2, C12 |
| 3 | 1MΩ | Resistors_SMD:R_0805_HandSoldering | R21, R22, R23 |
| 3 | 1µF | Capacitors_SMD:C_0805_HandSoldering | C15, C16, C17 |
| 3 | 4.7µF | Capacitors_SMD:C_0805_HandSoldering | C4, C6, C14 |
| 2 | 22Ω | Resistors_SMD:R_0805_HandSoldering | R15, R16 |
| 2 | 2N7002 | TO_SOT_Packages_SMD:SOT-23 | Q3, Q4 |
| 2 | 4.7KΩ | Resistors_SMD:R_0805_HandSoldering | R17, R18 |
| 2 | BUTTONLED_PINK | LEDs:LED_0603_HandSoldering | D7, D10 |
| 2 | DMN1004UFDF | lt_foots:U-DFN2020-6-smallerpads | Q1, Q5 |
| 2 | D_TVS | Capacitors_SMD:C_0603_HandSoldering | D8, D9 |
| 2 | MAT_PWR | Mounting_Holes:MountingHole_2.2mm_M2_Pad | MK2, MK6 |
| 2 | Q_NMOS_GSD | TO_SOT_Packages_SMD:SOT-23 | Q2, Q6 |
| 2 | VCC | Mounting_Holes:MountingHole_2.2mm_M2_Pad | MK4, MK5 |
| 1 | 0Ω | Resistors_SMD:R_1206_HandSoldering | R27 |
| 1 | 1.2KΩ | Resistors_SMD:R_0805_HandSoldering | R1 |
| 1 | 100 nF | Capacitors_SMD:C_0603_HandSoldering | C9 |
| 1 | 100nF | Capacitors_SMD:C_0805_HandSoldering | C3 |
| 1 | 10µH | Capacitors_SMD:C_0805_HandSoldering | L1 |
| 1 | 15KΩ | Resistors_SMD:R_1210_HandSoldering | R8 |
| 1 | 1kΩ | Resistors_SMD:R_0805_HandSoldering | R14 |
| 1 | 2.2µF | Capacitors_SMD:C_0805_HandSoldering | C8 |
| 1 | 380kΩ | Resistors_SMD:R_0805_HandSoldering | R26 |
| 1 | 4.7kΩ | Resistors_SMD:R_0805_HandSoldering | R25 |
| 1 | 470pF | Capacitors_SMD:C_0603_HandSoldering | C13 |
| 1 | AT25_EEPROM | Housings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mm | U5 |
| 1 | ATMEGA32U4-RC-MU | Housings_DFN_QFN:QFN-44-1EP_7x7mm_Pitch0.5mm | U2 |
| 1 | GREEN | LEDs:LED_0603_HandSoldering | D2 |
| 1 | ISP_Conn_01x06 | lt_foots:Conn_01x06_SMD_2mm | J3 |
| 1 | JTAG_Conn_01x06 | lt_foots:Conn_01x06_SMD_2mm | J2 |
| 1 | LIPO_W_NTC | lt_foots:CONN_AVX_RT_ANGLE_3pin_2.5mm_pitch | BAT1 |
| 1 | LL4148 | Diodes_SMD:D_MiniMELF | D11 |
| 1 | LOGO | lt_foots:prolight | G*** |
| 1 | LOGO | lt_foots:QR_TAG_small_invers | G*** |
| 1 | LOGO | lt_foots:cc-by-sa | G*** |
| 1 | LOGO | lt_foots:logo_light_warn | G*** |
| 1 | LOGO | lt_foots:onoff | G*** |
| 1 | LSM6DS3TR | lt_foots:LGA-14L_2.5x3mm__LSM6DS3 | U3 |
| 1 | MAT_SIG | Mounting_Holes:MountingHole_2.2mm_M2_Pad | MK3 |
| 1 | MIC5205-3.3 | TO_SOT_Packages_SMD:SOT-23-5 | U4 |
| 1 | OLED_0.86_14PIN | lt_foots:OLED_0.86_14pin_i2c | U6 |
| 1 | PWM_1 | Mounting_Holes:MountingHole_2.2mm_M2_Pad | MK1 |
| 1 | Polyfuse_1A_hold | Capacitors_SMD:C_0805_HandSoldering | F1 |
| 1 | RED | LEDs:LED_0603_HandSoldering | D1 |
| 1 | R_Pack_1kΩ | Resistors_SMD:R_Array_Convex_4x0603 | RN1 |
| 1 | STAT_GREEN | LEDs:LED_0603_HandSoldering | D5 |
| 1 | STAT_PINK | LEDs:LED_0603_HandSoldering | D6 |
| 1 | STAT_RED | LEDs:LED_0603_HandSoldering | D3 |
| 1 | STAT_YELLOW | LEDs:LED_0603_HandSoldering | D4 |
| 1 | SW_DOWN | lt_foots:white_nano_smd_switch | SW4 |
| 1 | SW_MODE | Buttons_Switches_SMD:SW_SPST_FSMSM | SW2 |
| 1 | SW_MODE | lt_foots:white_nano_smd_switch | SW1 |
| 1 | SW_UP | lt_foots:white_nano_smd_switch | SW3 |
| 1 | TEMP_Conn_01x02 | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.00mm | J4 |
| 1 | TP4056 | Housings_SOIC:SOIC-8-1EP_3.9x4.9mm_Pitch1.27mm | U1 |
| 1 | USB_Micro_Jack | lt_foots:Conn_USBmicro-B_ebay-side_TH_GROUND | J1 |
The 91 most common of 92 parts.
More from specs32/prolight
2- 2 layers95 × 65 mm

- 2 layers95 × 65 mm

Similar boards
- 4 layers56.2 × 70.5 mm

- 2 layers41.9 × 55.6 mm

Trace Talk
Sadrita404/Trace-Talk
TraceTalk is a Walkie talkie radio pin badge with a custom PCB and an ATMEGA328P (Arduino) microcontroller. Integrated rechargable battery, can be charged using any USB-C cable and USB power supply.
44 partsMIT - 4 layers32.4 × 40.2 mm

Smartwatch
Pedro-Seixas/Smartwatch
A custom-designed smartwatch built around the ESP32-S3, combining BLE connectivity, a rectangular touch display, recharge capability, IMU and temperature sensors. Designed from the ground up in KiCad.
55 partsMIT - 2 layers30.6 × 37.4 mm

GlowBandSmall
LEDs-by-glowingkitty/GlowBand
GlowBand is an exciting LED wristband. For dancing at parties and festivals, for long-time exposure photography, and for everyday situations that need some light.
52 parts4MIT - 2 layers60 × 35 mm

Lux minimus
machadoleonardo94/lux-et-tenebris
Devkit for LED strips, with wide range of voltage inputs, and options for current limited outputs
46 parts10BSD - 2 layers80 × 129.1 mm

Smart Plant
JGAguado/Smart_Plant
The Smart Plant is a board that can be plugged directly on the soil, close to the plant, that allows the measurement of the environment (soil moisture, environment temperature & illuminance), and presents the…
75 parts303 - 2 layers55.4 × 33 mm

Wasd code upgrade
cbiffle/keybrain
Drop-in replacement controller for WASD CODE v2B keyboard
24 parts82 - 4 layers103 × 82.4 mm

Questions
How big is the Modular eside rev14 PCB?
It measures 95 × 65 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Modular eside rev14 use?
92 parts, built around the ATMEGA32U4RC-MUR, LSM6DS3TR-C, MIC5205-3.3YM5 and TP4056. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Modular eside rev14 KiCad files?
From the specs32/prolight repository on GitHub, at the commit this page was made from: the board is REV14/KICAD/eside_rev14/modular_eside_rev14.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Modular eside rev14 design in my own project?
Its repository states no licence, so its author keeps all rights: ask specs32 before reusing the design.