

RP2350Adev
PCB Design (Olin College - Eclectronics SP25)
- Size
- 35.1 × 52.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 44
- Nets
- 61
- Pads
- 214
- Tracks, vias
- 699, 55
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 28 Jan 2026
- Updated
- 20 May 2026
Overview
RP2350Adev is an open-source printed circuit board by sparshgup, from the sparshgup/Eclectronics repository on GitHub. It is a 2-layer board of 35.1 × 52.4 mm with 44 parts on 61 nets, routed with 699 tracks and 55 vias.
It is built around the RP2350A, IN-S85TATRGB and USB4105-GF-A. Its parts include 17 capacitors, 12 resistors, 4 connectors, 3 ICs and 3 diodes. It belongs with the RP2350 boards of this library.
Main components
3RP2350A
QFN-60-EP(7x7)Power-on reset (POR)、Undervoltage detection (BOR/LVD/LVR/LVI)、Watchdog reset、Integrated LDO、True random number generator (TRNG)、Hardware ECC check QFN-60-EP(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)IN-S85TATRGB
SMD-4P,2x1.2mm-30℃~+85℃ 1.1mm 1.25mm 130° 2mm Common Anode G:523nm、R:625nm、B:470nm R:2.0V~2.2V、G:3.1V~3.4V、B:3.1V~3.4V R:200mcd、G:520mcd、B:140mcd R:20mA、G:20mA、B:20mA R:622nm、G:521nm、B:467nm R:75mW、B:75mW、G:75mW Water Clear SMD-4P,2x1.2mm RGB LEDs ROHSInoluxRGB LEDsUSB4105-GF-A
SMD-40℃~+85℃ 1 12P 48V 5A Black Female Surface Mount, Right Angle Type-C USB 2.0 SMD USB Connectors ROHSGlobal Connector Technology (GCT)USB Connectors
README
BNN/README.mdBinary Neural Network Inference Accelerator PCB
Built a custom 2-layer PCB that combines an RP2040 microcontroller with a Lattice iCE40UP5K FPGA. The goal was to run a small binary neural network (BNN) classifier on the FPGA in hardware. The RP2040 programs the FPGA, sends input data over SPI, gets back a classification result, and prints it over USB serial. An RGB LED shows which class was picked.
BNNs use XNOR and popcount instead of floating-point math, which maps well onto FPGA lookup tables. The demo targets the Iris dataset (4 inputs, 3 classes). The hardware doesn't care what model you use since the weights are just baked into the FPGA bitstream.
The design is based on the open-source pico-ice board by tinyVision.ai and the riffpga framework by Psychogenic Technologies.
Layout
PCB
Schematics
Parts
44| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 0.1µF | CL10B104JB8NNNC:CAP_CL10_SAM | C1, C4, C5, C6, C7, C8, C9, C10, C13, C15 |
| 5 | 4.7µF | GRM188Z71C475KE21D:CAP_GRM188D_MUR | C2, C3, C11, C12, C14 |
| 5 | 5.1K | ERJ_3EKF5101V:RC0603N_PAN | R1, R2, R3, R4, R9 |
| 4 | 1K | RC0603FR_071KL:RC0603N_YAG | R8, R10, R11, R12 |
| 2 | 10µF | GRM188R61E106KA73D:CAPC1608X100N | C16, C17 |
| 2 | 27Ω | RC0603FR_071KL:RC0603N_YAG | R5, R6 |
| 1 | 3.3µH | Eclectronics:AOTA-B201610S3R3-101-T | L1 |
| 1 | 33Ω | RC0603FR_071KL:RC0603N_YAG | R7 |
| 1 | BOOT | ul_B3U-1000P:B3U-1000P | S2 |
| 1 | DEBUG | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | G*** | Eclectronics:OlinLogoLg | OlinLogoLg |
| 1 | IN-S85TATRGB | Eclectronics:IN-S85TATRGB | D2 |
| 1 | IQXO-791 | Eclectronics:IQXO-791 | X1 |
| 1 | LED | LED_SMD:LED_0805_2012Metric | D1 |
| 1 | LEFT | Connector_PinHeader_2.54mm:PinHeader_1x20_P2.54mm_Vertical | J2 |
| 1 | MCP1702T-3302E_CB | ul_MCP1702T-3302E-CB:SOT-23A_MC_MCH | U3 |
| 1 | PWR | LED_SMD:LED_0805_2012Metric | D3 |
| 1 | RIGHT | Connector_PinHeader_2.54mm:PinHeader_1x20_P2.54mm_Vertical | J4 |
| 1 | RP2350A | Eclectronics:RP2350A_QFN-60_EP_7.75x7.75_Pitch0.4mm | U2 |
| 1 | RST | ul_B3U-1000P:B3U-1000P | S1 |
| 1 | USB4105-GF-A | Eclectronics:USB4105-GF-A | J1 |
| 1 | W25Q32JV | Package_SON:WSON-8-1EP_6x5mm_P1.27mm_EP3.4x4.3mm | U1 |
More from sparshgup/Eclectronics
2- 2 layers60.8 × 52.7 mm

- 2 layers19.5 × 14.8 mm

Similar boards
- 2 layers30 × 52 mm

RP2350Adev
CarterKoopa/eclectronics
Coursework for Eclectronics, Olin College's PCB Design course
48 partsGPL-3.0 - 2 layers41.6 × 54.3 mm

- 2 layers157.5 × 72 mm

Nixie tube clock
mbelanger0/nixie-tube-clock
A nixie tube clock as a final PCB design project for ENGR3430: Eclectronics at Olin College of Engineering
145 parts - 2 layers21.8 × 52.6 mm

- 2 layers21 × 51 mm

Custom rpi pico-2
eddydpan/custom-rpi-pico-2
Custom RP2354A development board in the style of the Raspberry Pi Pico 2, designed in KiCad 10
41 parts - 2 layers38.1 × 54.6 mm

Mp3 fa2026
flipper-slipper/eclectronics-fall-2026
coursework for the eclectronics class at olin collge for the fall 2026 semester. includes pcb design, project reports, circuit simulations.
41 parts - 2 layers26.5 × 52.3 mm

- 2 layers22.9 × 53.6 mm

Questions
How big is the RP2350Adev PCB?
It measures 35.1 × 52.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the RP2350Adev use?
44 parts, built around the RP2350A, IN-S85TATRGB and USB4105-GF-A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the RP2350Adev KiCad files?
From the sparshgup/Eclectronics repository on GitHub, at the commit this page was made from: the board is RP2350Adev/RP2350Adev.kicad_pcb and its schematic BNN/BNN.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the RP2350Adev design in my own project?
Its repository states no licence, so its author keeps all rights: ask sparshgup before reusing the design.