2 layers172.7 × 218.4 mm
AT386SX
Toysoft/mb386sx-rc2016
The origin of this project is the M396F motherboard replica by Marco Both. Marco replicated the PCB layout of a certain revision of M396F motherboard. He didn't provide the schematic.
150 parts
2 layers86.4 × 38.1 mm
RTC8088
spark2k06/RTC808833Real Time Clock for your PC XT. Very low profile, simple and open hardware.
- Size
- 86.4 × 38.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 11
- Nets
- 36
- Pads
- 90
- Tracks, vias
- 206, 8
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 15 Jan 2021
- Updated
- 6 Nov 2024
Overview
RTC8088 is an open-source printed circuit board by spark2k06, from the spark2k06/RTC8088 repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 86.4 × 38.1 mm with 11 parts on 36 nets, routed with 206 tracks and 8 vias.
It is built around the DS12885N+ and CR2032. Its parts include 2 ICs, 1 capacitor, 1 switch and 1 crystal. It belongs with the FPGA and CPLD boards of this library.
Main components
2
DS12885N+
PDIP-24-40℃~+85℃ 4.5V~5.5V Temperature compensation、Backup power management and battery charging、InsideSRAM/NVRAM、Programmable clock output、Alarm function、Power-off retention of registers、Periodic interrupt output PDIP-24 Real Time Clocks ROHSMaxim Integrated (Analog Devices)Real Time Clocks
CR2032
-- Unclassified goods ROHSMaxellUncategorised
README
README.mdRTC8088
Real Time Clock for your PC XT. Very low profile, simple and open hardware.
Hardware Documentation
Schematic and PCB Layout
Swiches and Jumpers
SW1 - RTC I/O address select
| I/O Address | SW1.1 | SW 1.2 | SW 1.3 |
|---|---|---|---|
| 0x70 | OFF | OFF | OFF |
| 0x240 | ON | OFF | OFF |
| 0x2A0 | OFF | ON | OFF |
| 0x2C0 | ON | ON | OFF |
| 0x340 | OFF | OFF | ON |
| 0x3A0 | ON | OFF | ON |
| 0x3C0 | OFF | ON | ON |
| Reserved | ON | ON | ON |
- Note 1: The table above gives the addresses in the supplied SPLD fuse map. The selection can be changed by reprogramming the SPLD
- Note 2: "Reserved" address is set to 0x70 in the supplied SPLD fuse map. It is recommended to use this setting when adding a custom I/O address to the SPLD
JP1 - Clear CMOS
| Position | Description |
|---|---|
| open (default) | Normal operation |
| closed | Clear NVRAM memory |
Bill of Materials
Version 3.0
RTC8088 project on Mouser.com - View and order all components except of the FDC and the PCB.
RTC8088 on OSH Park - View and order the PCB.
| Component type | Reference | Description | Quantity | Possible sources and notes |
|---|---|---|---|---|
| PCB | RTC8088 PCB - Version 3.0 | 1 | Order from your favorite PCB manufacturer using provided Gerber files | |
| Integrated Circuit | U1 | DS12885+ - RTC, 24 pin DIP | 1 | Mouser 700-DS12885 or 700-DS12885N |
| Integrated Circuit | U2 | ATF16V8B-15PU - Simple Programmable Logic Device, 20 pin DIP | 1 | Mouser 556-AF16V8B15PU or GAL16V8 |
| Quartz Crystal | Y1 | 32768 Hz, 6 pF | 1 | Mouser 815-AB26T32768KHZ6B, 520-ECS327-6-13-X, or 628-VT200F-6PF20PPM |
| Battery Holder | BT1 | CR2032 battery holder | 1 | Mouser 122-2620-GR or 122-2420-GR |
| Battery | BT1 | CR2032 battery | 1 | Mouser 81-CR2032, 658-CR2032, or 614-CR2032-200 |
| Capacitor | C1 | 0.1 uF, 50V, MLCC, 5 mm pitch | 1 | Mouser 594-K104K15X7RF53H5 or 810-FG28X7R1H104KNT6 |
| Resistor Array | RN1 | 10 kohm, bussed, 5 pin SIP | 1 | Mouser 652-4605X-1LF-10K or 652-4605X-AP1-103LF |
| DIP Switch | SW1 | DIP switch, 3 position, SPST | 1 | Mouser 774-2103MS |
| Pin Header | JP1 | 2 pin header, 2.54 mm pitch | 1 | Mouser 649-68002-102HLF |
| Jumper | JP1 | Shunt, 2 pin, 2.54 mm pitch | 1 | Mouser 806-SX1100-B |
| IC Socket | U1 | 20 pin DIP, 2.54 mm pitch, 7.62 mm row spacing | 1 | Mouser 649-DILB20P-223TLF |
| IC Socket | U2 | 24 pin DIP, 2.54 mm pitch, 15.24 mm row spacing | 1 | Mouser 649-DILB24P-223TLF |
Software
The board is supported by the 8088 BIOS and GLaTICK BIOS Extension.
Release Notes
Changes
- Version 3.0
- Add I/O address configuration switches
- Remove IRQ configuration jumpers and IRQ support
- Version 2.0
- Aitor RTC8088
- Version 1.0
- Initial version
Known Issues
- No known issues
Wishlist
- None so far
Red Tape
Licensing
RTC8088 is an open source hardware project. The hardware design itself, including schematic and PCB layout design files are licensed under the strongly-reciprocal variant of CERN Open Hardware Licence version 2. The SPLD code is licensed under GNU General Public License v3. Documentation, including this file, is licensed under the Creative Commons Attribution-ShareAlike 4.0 International License.
More information
Orignal RTC8088 Project Description
Parts
11| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 0.1uF | My_Components:Cap_Cer_508 | C1 |
| 1 | 10k | My_Components:Conn_SIL5 | RN1 |
| 1 | 32768Hz | My_Components:Crystal_32K_Horiz | Y1 |
| 1 | ATF16V8B | My_Components:IC_DIP20_300 | U2 |
| 1 | Address Select | My_Components:Switch_DIP_3_Positions | SW1 |
| 1 | BUSPC_DEV | My_Components:Conn_Edge_PCB_ISA8 | BUS1 |
| 1 | CR2032 | My_Components:Battery_Holder_CR2032_Universal | BT1 |
| 1 | Clear CMOS | My_Components:Conn_Pin_Header_2x1_2.54mm_NoKey | JP1 |
| 1 | DS12885 | My_Components:IC_DIP24_600 | U1 |
The 9 most common of 11 parts.
Questions
How big is the RTC8088 PCB?
It measures 86.4 × 38.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the RTC8088 use?
11 parts, built around the DS12885N+ and CR2032. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the RTC8088 KiCad files?
From the spark2k06/RTC8088 repository on GitHub, at the commit this page was made from: the board is KiCad/RTC8088.kicad_pcb and its schematic KiCad/RTC8088.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the RTC8088 design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers100 × 100 mm
RTC
crankery/crank68
One day I thought to myself I want to build a computer with the simplest 8 bit CPU I can think of". That CPU is the Motorola M6800 and this is the computer.
28 partsMIT - 2 layers99.1 × 10.2 mm
Isa8 lpt com rtc
cazacov/isa8_lpt_com_rtc
ISA 8-bit Card with LPT, COM ports and real time clock
26 parts1MIT - 4 layers273 × 178 mm
Pico thing
markrvmurray/pico-thing
An 8-bit MC6809E / HD6309E single-board computer with a pair of Raspberry Pi Pico 2 (RP2350 / Pimoroni PGA2350) modules acting as intelligent bus peripherals, a 1–2 MB banked-RAM DAT/MMU, a 40-pin PATA hard-disk…
206 parts1BSD-2-Clause - 2 layers99.1 × 59.7 mm
RC1 Real Time Clock
tebl/RC-ONE
A recreation of the MOS KIM-1 microcomputer, the start of the Commodore-line of computers. Complete with hex keypad, six digit displays and a lot of 8-bit fun!
28 parts25 - 2 layers333.4 × 149.9 mm
- 2 layers17.2 × 30.4 mm
- 4 layers188 × 188 mm
