Skip to the content
2 layers188.6 × 140.8 mmKeyboard, the printed circuit board in 3D
Size
188.6 × 140.8 mm
Copper layers
2
Thickness
1.6 mm
Parts
69
Nets
75
Pads
341
Tracks, vias
276, 6
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
25 May 2025
Updated
14 Jun 2025

Overview

Keyboard is an open-source printed circuit board by Spaceman113138, from the Spaceman113138/CADkeyboard repository on GitHub. It is a 2-layer board of 188.6 × 140.8 mm with 69 parts on 75 nets, routed with 276 tracks and 6 vias.

Its parts include 32 diodes, 3 resistors and 1 IC. It belongs with the keyboards and input boards and the RP2040 boards of this library.

README

README.md

CADkeyboard

Parts

69
QtyValueFootprintReferences
29D_SmallDiode_THT:D_T-1_P5.08mm_HorizontalD1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D23, D24 +13
29MX_SW_solderPCM_marbastlib-mx:SW_MX_1uMX1, MX2, MX10, MX11, MX12, MX13, MX14, MX15, MX16, MX17, MX18, MX19, MX20, MX21, MX23, MX24 +13
4MountingHoleMountingHole:MountingHole_3.2mm_M3_Pad_ViaH1, H2, H3, H4
3LEDLED_THT:LED_D3.0mmD22, D31, D32
3RResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_HorizontalR1, R2, R3
1PicoMCU_RaspberryPi_and_Boards:RPi_Pico_SMD_THU1

Similar boards

  • 2 layers117.3 × 54.5 mmMegapad, the printed circuit board in 3D

    Megapad

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    69 parts915
  • 2 layers100 × 96 mmBacklight, the printed circuit board in 3D

    Backlight

    jackw01/scanlight

    A better light source for scanning color negative film

    69 parts397CERN-OHL-W-2.0
  • 2 layers135.9 × 102.2 mmErgo42, the printed circuit board in 3D

    Ergo42

    Biacco42/Ergo42

    7x4 ortho linear split keyboard - The Answer to the Ultimate Question of Life, the Universe, and at least Keyboards

    69 parts218
  • 2 layers104.1 × 71.1 mmMinifp, the printed circuit board in 3D

    Minifp

    eigenco/frankenpi

    This is an experimental project to connect Raspberry Pi with the help of cheap Cyclone IV FPGA board to 8-bit ISA bus to act as multiple different devices.

    69 parts139
  • 2 layers90 × 140 mmDrumkid, the printed circuit board in 3D

    Drumkid

    mattybrad/drumkid

    Version 4 was the first successful working design, with full code, schematics, Gerbers, etc available on GitHub.

    69 parts137
  • 2 layers120 × 60 mmOverglade Badges, the printed circuit board in 3D

    Overglade Badges

    KaiPereira/Overglade-Badges

    NFC hackathon badges for the Overglade game jam in Singapore!

    69 parts126
  • 2 layers142 × 20 mmDeskController, the printed circuit board in 3D

    DeskController

    BerkeleyHCI/PolymorphicBlocks

    A Python-based hardware description language for PCBs for higher-level (block-diagram / system-architecture level) PCB design through libraries of directly reusable subcircuit generators.

    69 parts94BSD-3-Clause
  • 2 layers163.1 × 111.9 mmSpleeb, the printed circuit board in 3D

    Spleeb

    chrishoage/spleeb

    A split keyboard... or spleeb

    69 parts87MIT

Questions

How big is the Keyboard PCB?

It measures 188.6 × 140.8 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Keyboard use?

69 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Keyboard KiCad files?

From the Spaceman113138/CADkeyboard repository on GitHub, at the commit this page was made from: the board is keyboard/keyboard.kicad_pcb and its schematic keyboard/keyboard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Keyboard design in my own project?

Its repository states no licence, so its author keeps all rights: ask Spaceman113138 before reusing the design.