2 layers178 × 145 mm
Ultra DB X51 v1
ExploreEmbedded/8051_DevelopmentBoard
Design files and sample code for 8051 development Ultra Boards
145 parts70
2 layers103 × 78 mm
BoeBot
spaceiguana/PCBFor group porject (BoeBot)
- Size
- 103 × 78 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 20
- Nets
- 37
- Pads
- 90
- Tracks, vias
- 247, 0
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 16 Sep 2022
- Updated
- 16 Sep 2022
Overview
BoeBot is an open-source printed circuit board by spaceiguana, from the spaceiguana/PCB repository on GitHub. It is a 2-layer board of 103 × 78 mm with 20 parts on 37 nets, routed with 247 tracks and 0 vias.
It is built around the L293D. Its parts include 3 switches, 1 resistor, 1 IC and 1 diode. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1Parts
20| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | Conn_01x04_Male | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | Sensor 1, Sensor 2, Sensor 3, Sensor 4, Sensor 5 |
| 4 | MountingHole_2.1mm | MountingHole:MountingHole_2.1mm | Hole 1, Hole 2, Hole 3, Hole 4 |
| 3 | Conn_01x02_Male | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | 9.6 V DC, Motor 1, Motor 2 |
| 2 | SW_SPDT | SPDT:5MS3S402AM2QES | SW1, SW2 |
| 1 | Arduino_Nano_v3.x | Module:Arduino_Nano | A1 |
| 1 | L293D | Package_DIP:DIP-16_W7.62mm | U1 |
| 1 | LED | LED:L-53HD | D1 |
| 1 | LOGO | logo:logo | G*** |
| 1 | R | 150R:RESC3116X65N | R1 |
| 1 | SW_Push | Tactile_Switch:B3F1000 | SW3 |
Questions
How big is the BoeBot PCB?
It measures 103 × 78 mm and has 2 copper layers, 1.6 mm thick.
What parts does the BoeBot use?
20 parts, built around the L293D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the BoeBot KiCad files?
From the spaceiguana/PCB repository on GitHub, at the commit this page was made from: the board is BoeBot.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the BoeBot design in my own project?
Its repository states no licence, so its author keeps all rights: ask spaceiguana before reusing the design.
Similar boards
- 2 layers84.3 × 58.4 mm
EnocderDriver
NikodemBartnik/Small-Projects
All of smaller projects (Arduino, PCBs, electronics, code)
35 parts55 - 2 layers56.4 × 72.6 mm
Ras pi hat
geno543/Redropi_highway
the project aims to detect asteroids and meteor movement using high-quality cameras and radar detection methods using an AI model for accurate analysis, and it classifies bodies be in three categories: non-meteor…
8 parts13 - 2 layers87.5 × 70 mm
- 2 layers92.5 × 62.5 mm
DropGenPCB
harrislab-brown/DropGen
DropGen uses a fluid reservoir and a piezoelectric buzzer to precisely and repeatably dispense small droplets on demand.
25 parts12CC-BY-SA-4.0 - 2 layers47.5 × 49.5 mm
- 2 layers120.7 × 184.1 mm
- 2 layers90 × 53.4 mm
