2 layers71.1 × 128.5 mm
2 layers100 × 100 mm
A Eurorack genetic sequencer
- Size
- 100 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 140
- Nets
- 129
- Pads
- 475
- Tracks, vias
- 1,108, 334
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 9 May 2020
- Updated
- 8 Oct 2023
Overview
Grow is an open-source printed circuit board by soundslikefrank, from the soundslikefrank/grow repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 100 × 100 mm with 140 parts on 129 nets, routed with 1,108 tracks and 334 vias.
It is built around the R-78E5.0-0.5, TL072 and TLC59482DBQ, with the SN74AHCT1G125DBVR(UMW), ADP150AUJZ-3.3-R7 and LM1117-3.3 among its other parts. Its parts include 45 capacitors, 39 resistors, 14 diodes, 13 connectors and 11 ICs. It belongs with the audio and music boards and the STM32 boards of this library.
Main components
12
R-78E5.0-0.5
SIP,11.5x7.6mm-300mA、500mA -5V、5V 1 330uF、680uF 6.5V~36V、7V~31V 81%、90% Buck Short Circuit Protection SIP,11.5x7.6mm DC-DC Power Modules ROHSYLPTECDC-DC Power Modules
TL072
SOP-8-18V~18V 0℃~+70℃ 1.4mA 1.5nA 10V/us 10mV 2 2.5nA 3MHz 85dB SOP-8 Operational Amplifier ROHSGcoreOperational Amplifier
TLC59482DBQ
SSOP-24-150mil-40℃~+85℃ 1% 10V 16 25MHz~30MHz 35mA、45mA 3V~5.5V Over-Temperature Protection (OTP) PWM SSOP-24-150mil LED Drivers ROHSTexas InstrumentsLED Drivers
SN74AHCT1G125DBVR(UMW)
SOT-23-5-40℃~+125℃ 1 1 10uA 12ns@5V,50pF 2V 3.8V、4.4V 4.5V~5.5V 440mV 74AHCT 800mV 8mA 8mA SOT-23-5 Logic Gates ROHSUMWLogic GatesADP150AUJZ-3.3-R7
TSOT-5-40℃~+125℃@(Tj) 1 10uA 150mA 160mV@(150mA) 3.3V 5.5V 70dB@(10kHz) 9uVrms Fixed Positive Under Voltage Lockout、Over Current Protection、Over Temperature Protection、Enable、Thermal Shutdown TSOT-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAnalog DevicesVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
LM1117-3.3
SOT-2231 1.3V@(1000mA) 15V 1A 2mA 3.3V Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHShongjiachengUncategorisedPTL30-10R0-502B2
插件100mW 5kΩ ±20% 插件 Potentiometers, Variable Resistors ROHSBournsPotentiometers & Variable Resistors
SSL-LX3059IGW-CA
插件LED Indication - DiscreteLumex
B72500D0160H060
SOD-52316V 290V 5pF@1MHz 65V SOD-523 Varistors ROHSTDKVaristors
BAT54S
SOT-231 Pair Series Connection 1V@100mA 200mA 2uA@25V 30V 600mA SOT-23 Schottky Diodes ROHSMDDSchottky DiodesMMBT3904
SOT-23-55℃~+150℃ 1 NPN 100 100nA 200mA 200mW 300MHz 300mV 40V 6V NPN SOT-23 Bipolar (BJT) ROHSJiangsu Changjing Electronics Technology (CJ)Bipolar (BJT)
PEC11R-4220F-S0024
插件插件 Rotary Encoders ROHSBournsRotary Encoders
README
README.mdGROW
A Eurorack genetic sequencer.
This repository serves as the home for its MCU code and hardware schematics.
There will be a lot more info soon.
To build
git submodule update --init --recursive # if not cloned recursively
brew install cmake
brew install --cask gcc-arm-embedded
mkdir build && cd build
cmake -DCMAKE_TOOLCHAIN_FILE=../arm-none-eabi-gcc.cmake ..
makeLICENSE
GNU General Public License v3.0
Parts
140| Qty | Value | Footprint | References |
|---|---|---|---|
| 24 | 100n | Capacitor_SMD:C_0603_1608Metric | C3, C10, C11, C12, C14, C17, C18, C21, C22, C23, C24, C25, C26, C27, C28, C29 +8 |
| 8 | 220R | Resistor_SMD:R_0603_1608Metric | R18, R19, R20, R21, R22, R23, R24, R25 |
| 8 | PTL30-10R0-502B2 | PTL30-10R1-103B2:PTL3010R1103B2 | VR1, VR2, VR3, VR4, VR5, VR6, VR7, VR8 |
| 8 | SSL-LX3059IGW-CA | LED_THT:LED_D3.0mm-3 | D2, D3, D4, D5, D6, D7, D8, D9 |
| 7 | PJ398SM | Connector_Audio:Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles | J1, J2, J5, J6, J7, J9, J10 |
| 5 | 10k | Resistor_SMD:R_0603_1608Metric | R5, R17, R27, R28, R39 |
| 5 | 1u | Capacitor_SMD:C_0603_1608Metric | C8, C39, C40, C41, C42 |
| 4 | 100k | Resistor_SMD:R_0603_1608Metric | R14, R15, R29, R30 |
| 3 | 100p | Capacitor_SMD:C_0603_1608Metric | C15, C43, C44 |
| 3 | 10u | Capacitor_SMD:C_0805_2012Metric | C31, C32, C34 |
| 3 | 22u | Capacitor_SMD:C_0805_2012Metric | C36, C37, C38 |
| 3 | 33k | Resistor_SMD:R_0603_1608Metric | R16, R35, R36 |
| 3 | B72500D0160H060 | Diode_SMD:D_0603_1608Metric | D10, D13, D14 |
| 2 | 100 @ 100MHz | Inductor_SMD:L_0805_2012Metric | FB1, FB2 |
| 2 | 100R | Resistor_SMD:R_0603_1608Metric | R37, R38 |
| 2 | 10p | Capacitor_SMD:C_0603_1608Metric | C19, C20 |
| 2 | 140k | Resistor_SMD:R_0603_1608Metric | R31, R32 |
| 2 | 1N5819 | Diode_SMD:D_SOD-123 | D11, D12 |
| 2 | 1k | Resistor_SMD:R_0603_1608Metric | R2, R3 |
| 2 | 200k | Resistor_SMD:R_0603_1608Metric | R33, R34 |
| 2 | 22-26p | Capacitor_SMD:C_0603_1608Metric | C2, C4 |
| 2 | 270k | Resistor_SMD:R_0603_1608Metric | R10, R11 |
| 2 | 470R | Resistor_SMD:R_0603_1608Metric | R12, R13 |
| 2 | 75k | Resistor_SMD:R_0603_1608Metric | R8, R9 |
| 2 | Alpha B10k | Potentiometer_THT:Potentiometer_Alpha_RD901F-40-00D_Single_Vertical | VR9, VR10 |
| 2 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J3, J4 |
| 2 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3 | H1, H2 |
| 2 | SN74AHCT1G125DBVR | SN74AHCT1G125DBVR:SOT95P280X145-5N | IC1, IC2 |
| 1 | 10u | Inductor_SMD:L_0805_2012Metric | L1 |
| 1 | 1k8 | Resistor_SMD:R_0603_1608Metric | R26 |
| 1 | 1n | Capacitor_SMD:C_0603_1608Metric | C13 |
| 1 | 220n | Capacitor_SMD:C_0603_1608Metric | C16 |
| 1 | 2k | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | 36k | Resistor_SMD:R_0603_1608Metric | R6 |
| 1 | 4u7 | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | 56k | Resistor_SMD:R_0603_1608Metric | R7 |
| 1 | 750R | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | ABM3-8.000MHZ | Crystal:Crystal_SMD_Abracon_ABM3-2Pin_5.0x3.2mm_HandSoldering | Y1 |
| 1 | ADP150AUJZ-3.3-R7 | ADP150AUJZ-3.3-R7:SOT95P280X100-5N | IC5 |
| 1 | BAT54S | Package_TO_SOT_SMD:SOT-23 | D1 |
| 1 | Conn_01x01 | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J13 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J12 |
| 1 | Conn_02x05_Odd_Even | Connector_PinHeader_1.27mm:PinHeader_2x05_P1.27mm_Vertical | J11 |
| 1 | DAC8562SDGSR | DAC8562:SOP50P490X110-10N | IC4 |
| 1 | Eurorack PWR | Connector_IDC:IDC-Header_2x05_P2.54mm_Vertical | J8 |
| 1 | LM1117-3.3 | Package_TO_SOT_SMD:SOT-223 | U3 |
| 1 | LM4040DBZ-10 | Package_TO_SOT_SMD:SOT-23 | U5 |
| 1 | MCP6002-xMS | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U6 |
| 1 | MMBT3904 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | PEC11R-4220F-S0024 | PEC11R-4220F-S0024:PEC11R4220FS0024 | VR11 |
| 1 | R-78E5.0-0.5 | Converter_DCDC:Converter_DCDC_RECOM_R-78E-0.5_THT | U4 |
| 1 | STM32L452RETx | Package_QFP:LQFP-64_10x10mm_P0.5mm | U1 |
| 1 | TL072 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | TLC59482DBQ | TLC59482DBQ:SOP64P600X175-24N | IC3 |
Questions
How big is the Grow PCB?
It measures 100 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Grow use?
140 parts, built around the R-78E5.0-0.5, TL072, TLC59482DBQ and SN74AHCT1G125DBVR(UMW). The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Grow KiCad files?
From the soundslikefrank/grow repository on GitHub, at the commit this page was made from: the board is hardware/grow.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Grow design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers39.4 × 109.2 mm
- 2 layers69.2 × 106.7 mm
- 2 layers69.2 × 106.7 mm
- 4 layers58.4 × 101.9 mm
Up5k osc
emeb/up5k_osc
The brute-force approach is to synthesize these analog waveforms at sufficiently high sample rates that the timing jitter becomes imperceptible.
137 parts36MIT - 2 layers148 × 84.5 mm
Panel daisy
ohmtech-rdi/eurorack-blocks
Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust
259 parts410 - 2 layers66 × 107.5 mm
Tonwerk haupt
Marcel-B/Synth
Die beiden Browser-Synthesizer aus Tonwerk (YuE UI) als Plugins für Logic Pro: Tonwerk Analog und Tonwerk FM, jeder mit Delay und Hall und eigenen Werksklängen.
100 parts - 2 layers101.3 × 108.3 mm
