Skip to the content
2 layersAstable-555-Sequencer, the printed circuit board in 3D

Hardware design files for an astable 555 oscillator and CD4017 decade counter LED chaser, designed in KiCad.

Copper layers
2
Thickness
1.6 mm
Parts
20
Nets
19
Pads
62
Tracks, vias
157, 11
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
4 Mar 2026
Updated
21 Mar 2026

Overview

Astable-555-Sequencer is an open-source printed circuit board by Soultk1977, from the Soultk1977/Astable-555-Sequencer repository on GitHub. It is a 2-layer board with 20 parts on 19 nets, routed with 157 tracks and 11 vias.

It is built around the NE555P. Its parts include 10 diodes, 3 connectors, 2 capacitors, 2 resistors and 2 ICs.

Main components

1

README

README.md

Astable 555 Sequencer (Heart LED Chaser)

Hardware design files for an astable 555 oscillator and CD4017 decade counter LED chaser, designed in KiCad.

[3D Render of the PCB] 3D

Overview

This is a custom-designed printed circuit board built as part of the Hack Club Stasis program. The board functions as an LED chaser; it sequences 10 LEDs in a continuous loop.

Hardware Logic

The circuit relies on two primary integrated circuits:

  • NE555P Timer: Configured in astable mode to act as the system clock. It continuously generates a square wave pulse. A 10k potentiometer is included in the timing circuit to allow for manual speed adjustments of the clock pulse.
  • CD4017 Decade Counter: Acts as an IO expander. It takes the clock pulse from the 555 timer and sequentially shifts the output high across its 10 pins, lighting up the connected LEDs one by one.

Project Features

  • Custom heart-shaped board outline designed using a low-poly geometric polygon.
  • 10 through-hole LEDs arranged along the board perimeter.
  • 2-layer routing with a comprehensive front and back copper ground pour for signal integrity.

Parts

20
QtyValueFootprintReferences
10LEDLED_THT:LED_D5.0mmD1, D2, D3, D4, D5, D6, D7, D8, D9, D10
2Conn_01x02_SocketConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ1, J2
11kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR1
14017Custom_Imports:N16U2
1470Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR2
1CCapacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mmC2
1C_PolarizedCapacitor_THT:CP_Radial_D5.0mm_P2.00mmC1
1Conn_01x01_SocketConnector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_VerticalJ3
1NE555PPackage_DIP:DIP-8_W7.62mmU1
1R_PotentiometerPotentiometer_THT:Potentiometer_Bourns_PTV09A-1_Single_VerticalRV1

Similar boards

  • 2 layers327.9 × 139 mmCoco2, the printed circuit board in 3D

    Coco2

    baldengineer/bit-preserve

    Project for capturing vintage, classic, aka old computer schematics in KiCad.

    147 parts446
  • 2 layers370.8 × 298.5 mm8 Bit Computer, the printed circuit board in 3D

    8 Bit Computer

    The-Invent0r/8-bit-Computer-PCB

    These are the KiCAD files for my 8-Bit Computer.

    323 parts142
  • 2 layers200 × 96 mmTouchtone555, the printed circuit board in 3D

    Touchtone555

    DarcyJProjects/touchtone555

    An open-source DIY, NE555-based analogue synthesizer - play notes with a stylus

    73 parts33
  • 4 layers340 × 210 mmYddraig, the printed circuit board in 3D

    Yddraig

    ddraig68k/hardware

    Schematic and CAD files for my 68K based computer

    224 parts29MIT
  • 2 layers152.9 × 74.9 mmClock, the printed circuit board in 3D

    Clock

    erikvanzijst/clock

    24H digital quartz clock from scratch

    82 parts21
  • 2 layers88.9 × 50.8 mmSynthCard, the printed circuit board in 3D

    SynthCard

    benjiaomodular/SynthCard

    I designed this project with the help of PCBWay. You can get a copy of these cards through the PCBWay Shared Projects page.

    16 parts19MIT
  • 4 layers194.5 × 188.6 mmMyCpu, the printed circuit board in 3D

    MyCpu

    fortinsylvain/MyCpu

    Home brew CPU Hardware with 1-bit ALU implementation using 74LSxx, a micro-code and assembler coded in C#.

    162 parts18MIT
  • 2 layers145.3 × 129.9 mmC128Diag, the printed circuit board in 3D

    C128Diag

    hackup/C128Diag

    Replica of the Commodore C128 Diagnostic Test cartridge Assy No. 325093-01.

    61 parts16

Questions

What parts does the Astable-555-Sequencer use?

20 parts, built around the NE555P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Astable-555-Sequencer KiCad files?

From the Soultk1977/Astable-555-Sequencer repository on GitHub, at the commit this page was made from: the board is Astable-555-Sequencer.kicad_pcb and its schematic Astable-555-Sequencer.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Astable-555-Sequencer design in my own project?

Its repository states no licence, so its author keeps all rights: ask Soultk1977 before reusing the design.