2 layers
2 layers
Control
Soul-vy/PCB_Projects- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 13
- Nets
- 45
- Pads
- 95
- Tracks, vias
- 210, 0
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 16 Feb 2026
- Updated
- 13 Apr 2026
Overview
Control is an open-source printed circuit board by Soul-vy, from the Soul-vy/PCB_Projects repository on GitHub. It is a 2-layer board with 13 parts on 45 nets, routed with 210 tracks and 0 vias.
It is built around the ARDUINO UNO R3. Its parts include 10 connectors and 1 capacitor. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
README.mdAll PCB projects have done.
Parts
13| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 100u | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C1 |
| 1 | 12V | Connector_JST:JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | J10 |
| 1 | Additional Digital | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-14-5.08_1x14_P5.08mm_Horizontal | J2 |
| 1 | Additional analog | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-6_1x06_P5.00mm_Horizontal | J3 |
| 1 | Arduino_UNO_R3 | Module:Arduino_UNO_R3 | A1 |
| 1 | Ir Sensor | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-3_1x03_P5.00mm_Horizontal | J4 |
| 1 | Power | Connector_JST:JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | J11 |
| 1 | Servo 1 | Connector_JST:JST_EH_B3B-EH-A_1x03_P2.50mm_Vertical | J6 |
| 1 | Servo 2 | Connector_JST:JST_EH_B3B-EH-A_1x03_P2.50mm_Vertical | J7 |
| 1 | Smoke Sensor | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-4_1x04_P5.00mm_Horizontal | J5 |
| 1 | Stepper | Connector_JST:JST_EH_B4B-EH-A_1x04_P2.50mm_Vertical | J9 |
| 1 | Stepper Driver | Module:Pololu_Breakout-16_15.2x20.3mm | A2 |
| 1 | Ultra Sonic | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-4-5.08_1x04_P5.08mm_Horizontal | J1 |
Questions
What parts does the Control use?
13 parts, built around the ARDUINO UNO R3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Control KiCad files?
From the Soul-vy/PCB_Projects repository on GitHub, at the commit this page was made from: the board is Control/Control.kicad_pcb and its schematic Control/Control.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Control design in my own project?
Its repository states no licence, so its author keeps all rights: ask Soul-vy before reusing the design.
More from Soul-vy/PCB_Projects
3- 2 layers
- 2 layers
Similar boards
- 2 layers68.8 × 53.6 mm
Relatively Universal ROM Programmer
AndersBNielsen/Relatively-Universal-ROM-Programmer
Hardware to program W27C512 EEPROM or any 24/28/32 pin ROM requiring from 5V to 27V programming voltage.
149 parts257GPL-3.0 - 2 layers69.1 × 53.8 mm
Motor controller
AlanFord/self-balancing-stick
Dual Axis Reaction Wheel Inverted Pendulum
25 parts79MIT - 2 layers68.6 × 53.3 mm
Protogasm Board V2
Edging-Machines/Edging-Machines
This repository is intended to contain as much information as possible about building, designing, prototyping, and using automated edging machines.
14 parts67MIT - 2 layers53.8 × 69.6 mm
EVSE V2 2
PedroCNeves/AC_ChargingStation
A learning project to create an EV AC Charging station based on an Arduino Uno
32 parts50 - 2 layers113.7 × 61 mm
ArduTester SMD
jonsag/arduTester
An arduino component tester based on https://create.arduino.cc/projecthub/plouc68000/ardutester-v1-13-the-arduino-uno-transistor-tester-dbafb4
17 parts14 - 4 layers65.9 × 52.9 mm
- 4 layers68.6 × 53.3 mm
101 PCB
ICRS/101
The all-new open source Robotics 101 course from ICRS. It's specifically designed to be run in hackspaces, after school clubs and university societies.
89 parts10CC-BY-4.0 - 2 layers53.3 × 68.3 mm
