Skip to the content
4 layers99.8 × 97.3 mmStairway to heaven pcb, the printed circuit board in 3D

Stairway to heaven pcb

sorell/whirling-electrons2

PCB designs and arduino code

Size
99.8 × 97.3 mm
Copper layers
4
Thickness
1.58 mm
Parts
115
Nets
131
Pads
420
Tracks, vias
756, 472
Pours
10
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
21 Nov 2018
Updated
7 Oct 2026

Overview

Stairway to heaven pcb is an open-source printed circuit board by sorell, from the sorell/whirling-electrons repository on GitHub. It is a 4-layer board of 99.8 × 97.3 mm with 115 parts on 131 nets, routed with 756 tracks and 472 vias.

It is built around the LM2575T-5.0, FDN337N and PJ-063AH. Its parts include 42 resistors, 42 transistors, 16 connectors, 6 capacitors and 2 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

3

README

arduino-nano-breakout-1-pcb/README.md

arduino-nano-breakout-1

A PCB design which houses an Arduino Nano, 5,5mm barrel jack, power source selection and output pin header for gpio.

Parts

115
QtyValueFootprintReferences
4250kResistor_SMD:R_0805_2012MetricR10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R21, R22, R23, R24, R25 +26
42FDN337NFDN337N:ON_Semi-527AG-01-12_2008-O-IPC_BQ1, Q2, Q10, Q11, Q12, Q13, Q14, Q15, Q16, Q17, Q18, Q19, Q20, Q21, Q22, Q23 +26
14Conn_01x04_Malekicad-ss-libs:ScrewTerminal-5_08J1, J2, J3, J4, J5, J6, J7, J8, J9, J10, J11, J12, J13, J14
310uFCapacitor_SMD:C_1206_3216MetricC3, C5, C6
3MountingHole_PadMountingHole:MountingHole_2.2mm_M2_DIN965_PadH1, H2, H3
2100uFCapacitor_SMD:C_Elec_8x6.2C2, C4
1100uHInductor_SMD:L_10.4x10.4_H4.8L1
147uFCapacitor_SMD:C_Elec_6.3x5.8C1
1Arduino_Nano_v2.xModule:Arduino_NanoA1
1Conn_01x06_MaleScrewTerminal-5_08:ScrewTerminal-5_08-6J16
1DO-214ACDiode_SMD:D_SMAD1
1LM2575T-5.0kicad-ss-libs:LM2575T-5.0U2
1MEGA_PRO_EMBED_CH340G_{slash}_ATMEGA2560kicad:MEGA_PRO_EMBED_CH340G___ATMEGA2560U1
1PJ-063AHkicad-ss-libs:CUI_PJ-063AHJ15
1R_Potentiometer_TrimCA6V Potentiometer THT:CA6V-NoMidHoleRV100k1

More from sorell/whirling-electrons

4
  • 2 layers93 × 95.3 mmParking timer, the printed circuit board in 3D

    Parking timer

    sorell/whirling-electrons

    PCB designs and arduino code

    32 parts2
  • 2 layers87.6 × 34.8 mmInfinity table pcb, the printed circuit board in 3D

    Infinity table pcb

    sorell/whirling-electrons

    PCB designs and arduino code

    17 parts2
  • 2 layers36.1 × 69.2 mmPcb tea timer, the printed circuit board in 3D

    Pcb tea timer

    sorell/whirling-electrons

    PCB designs and arduino code

    13 parts2

Similar boards

  • 2 layers100 × 80 mmDrip, the printed circuit board in 3D

    Drip

    Verdagraph/Drip

    IOT devices to automate agriculture

    89 partsGPL-3.0
  • 2 layers95 × 65 mmWled, the printed circuit board in 3D

    Wled

    3komma3volt/wled-controller

    A small PCB with step-down for use with WLED firmware

    64 parts7MIT
  • 4 layers146.1 × 55 mmStarGate MainBoard, the printed circuit board in 3D

    StarGate MainBoard

    plhsystems/stargate-mainboard-esp32

    Mainboard for Kristian's stargate projects, based on ESP32-S3

    171 parts4
  • 2 layers55 × 35 mmMini BT Pcb-328P, the printed circuit board in 3D

    Mini BT Pcb-328P

    d-diot/Mini-BT-Pcb-328P

    MySensors ATMega328P + RFM69 and NRF24 battery (AAA and CR2032) powered pcb

    54 parts3
  • 2 layers47.8 × 57.9 mmESP8266-LolinV3-Lamp, the printed circuit board in 3D

    ESP8266-LolinV3-Lamp

    d-diot/ESP8266-LolinV3-Lamp

    A pcb for the NodeMCU Lolin V3 board with power management for a WS2812 LED strip

    30 parts2
  • 4 layers42 × 42 mmStepper Servo, the printed circuit board in 3D

    Stepper Servo

    jawher-Mansour/619-J_Stepper

    619-J_Stepper is an open source closed loop stepper driver.

    69 parts2
  • 2 layers108 × 66.7 mmRX8 Ashtray Gauges, the printed circuit board in 3D

    RX8 Ashtray Gauges

    andrewandneil/rx8-ashtray-gauges

    A simplistic set of digital guages for the Mazda RX-8's ashtray.

    61 parts1
  • 2 layers151 × 130.6 mmFixture Dev Kit, the printed circuit board in 3D

    Fixture Dev Kit

    puskyer/Fixture-Dev-Kit

    A PCB for test fixture prototyping

    182 parts1

Questions

How big is the Stairway to heaven pcb PCB?

It measures 99.8 × 97.3 mm and has 4 copper layers, 1.58 mm thick.

What parts does the Stairway to heaven pcb use?

115 parts, built around the LM2575T-5.0, FDN337N and PJ-063AH. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Stairway to heaven pcb KiCad files?

From the sorell/whirling-electrons repository on GitHub, at the commit this page was made from: the board is stairway-to-heaven-pcb/stairway-to-heaven-pcb.kicad_pcb and its schematic advent-calendar-rnd-pcb/advent-calendar-rnd.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Stairway to heaven pcb design in my own project?

Its repository states no licence, so its author keeps all rights: ask sorell before reusing the design.