2 layers40.6 × 58.4 mm
2 layers151 × 130.6 mm
Fixture Dev Kit
puskyer/Fixture-Dev-Kit1A PCB for test fixture prototyping
- Size
- 151 × 130.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 182
- Nets
- 188
- Pads
- 600
- Tracks, vias
- 1,370, 127
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 28 Aug 2018
- Updated
- 21 Nov 2017
Overview
Fixture Dev Kit is an open-source printed circuit board by puskyer, from the puskyer/Fixture-Dev-Kit repository on GitHub. It is a 2-layer board of 151 × 130.6 mm with 182 parts on 188 nets, routed with 1,370 tracks and 127 vias.
It is built around the LNJP12X8ARA, FDN337N and TL9210AF260Q, with the NTF2955T1G among its other parts. Its parts include 57 resistors, 41 connectors, 21 diodes, 16 transistors and 7 fuses.
Main components
4
LNJP12X8ARA
0603-30℃~+85℃ 11mcd~41mcd 2.9V 40mW Discrete Diode Pink 0603 LED Indication - Discrete ROHSPanasonicLED Indication - Discrete
FDN337N
SOT-23-55℃~+150℃ 1 N-channel 120pF 2.2A 300pF 30V 400mV 500mW 65mΩ@4.5V 80pF SOT-23 MOSFETs ROHSTECH PUBLICMOSFETsTL9210AF260Q
-- Tactile Switches ROHSE-SwitchTactile Switches
NTF2955T1G
SOT-223-55℃~+150℃ 1 P-Channel 2.2W 2V 32pF 39pF 3A 6.2nC@4.5V 60V 708pF 95mΩ@10V SOT-223 MOSFETs ROHSTECH PUBLICMOSFETs
README
README.mdFixture-Dev-Kit
A PCB for test fixture prototyping
Parts
182| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | 1K | Resistors_SMD:R_0805_HandSoldering | R1, R2, R3, R4, R5, R6, R7, R8, R26, R27, R28, R29, R36, R37, R38, R39 |
| 12 | 160R | Resistors_SMD:R_0805_HandSoldering | R17, R18, R20, R21, R30, R31, R40, R41, R42, R43, R56, R57 |
| 9 | Jumper_NC_Small | Resistors_SMD:R_0805 | JP1, JP2, JP3, JP4, JP5, JP6, JP7, JP8, JP9 |
| 8 | DNP | Resistors_SMD:R_0805_HandSoldering | R9, R10, R11, R12, R13, R14, R15, R16 |
| 8 | LNJP12X8ARA | 1206:1206 | D10, D11, D12, D13, D18, D19, D20, D21 |
| 8 | NTF2955-D | NTF2955T1G:SOT230P700X180-4N | Q5, Q6, Q7, Q8, Q9, Q10, Q11, Q12 |
| 6 | FDN337N | FDN337N:SSOT-3 | Q3, Q4, Q13, Q14, Q15, Q16 |
| 5 | 0.1uF | Capacitors_SMD:C_0805_HandSoldering | C5, C6, C7, C8, C9 |
| 5 | TL9210AF260Q | TL9210AF260Q:TL9210AF260Q | SW1, SW2, SW3, SW4, SW6 |
| 4 | 0.1R | Resistors_SMD:R_0805_HandSoldering | R24, R25, R34, R35 |
| 4 | 1.5A | 1206:1206 | F2, F3, F4, F5 |
| 4 | 10R 5W | RES_TWM3J560E:RES_TWM3J560E | R22, R23, R32, R33 |
| 4 | 10R5W | RES_TWM3J560E:RES_TWM3J560E | R44, R45, R46, R47 |
| 4 | Conn_01x20 | Pin_Headers:Pin_Header_Straight_1x20_Pitch2.54mm | J15, J16, J20, J21 |
| 4 | Green | LEDs:LED_0805_HandSoldering | D5, D6, D7, D8 |
| 4 | INA219BIDCNT | INA219BIDCNR:SOT65P280X145-8N | U1, U2, U3, U4 |
| 4 | INA_40 | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | J27, J28, J29, J30 |
| 4 | LED | 1206:1206 | D14, D15, D16, D17 |
| 4 | NC | Resistors_SMD:R_0805_HandSoldering | R48, R49, R50, R51 |
| 4 | Purple | LEDs:LED_0805_HandSoldering | D1, D2, D3, D4 |
| 4 | SIG | TestPoint:TestPoint | TP1, TP2, TP3, TP4 |
| 4 | SW_0 | Pin_Headers:Pin_Header_Straight_2x01_Pitch2.54mm | J18, J19, J22, J24 |
| 4 | SW_0 | TerminalBlocks:2Pin5.08 | J26, J32, J33, J34 |
| 4 | TEST | TestPoint:TestPoint | TP7, TP8, TP9, TP10 |
| 3 | 1R | Resistors_SMD:R_0805_HandSoldering | R53, R54, R55 |
| 2 | FET_0 | Pin_Headers:Pin_Header_Straight_2x03_Pitch2.54mm | J11, J12 |
| 2 | Fuse | 1206:1206 | F6, F7 |
| 2 | NTF2955T1G | TO_SOT_Packages_SMD:SOT-223 | Q1, Q2 |
| 1 | 0R | Resistors_SMD:R_0805_HandSoldering | R52 |
| 1 | 10K | Resistors_SMD:R_0805_HandSoldering | R19 |
| 1 | 1206SFP300F | 1206:1206 | F1 |
| 1 | 40 V+ | Pin_Headers:Pin_Header_Straight_1x01_Pitch2.54mm | J35 |
| 1 | 41 V+ | Pin_Headers:Pin_Header_Straight_1x01_Pitch2.54mm | J36 |
| 1 | 42 V+ | Pin_Headers:Pin_Header_Straight_1x01_Pitch2.54mm | J37 |
| 1 | 43 V+ | Pin_Headers:Pin_Header_Straight_1x01_Pitch2.54mm | J38 |
| 1 | ADS | Pin_Headers:Pin_Header_Straight_1x04_Pitch2.54mm | J31 |
| 1 | ADS1015IDGST | ADS1015IDGST:SOP50P490X110-10N | U5 |
| 1 | CHIP4LH | Pin_Headers:Pin_Header_Straight_2x20_Pitch2.54mm | J23 |
| 1 | CHIP4RH | Pin_Headers:Pin_Header_Straight_2x20_Pitch2.54mm | J17 |
| 1 | Conn_01x05 | Pin_Headers:Pin_Header_Straight_1x05_Pitch2.54mm | J41 |
| 1 | DUT | CHIP4DUT:DUT_HEADER_FOOTPRINT | J1 |
| 1 | DUT BAT | Connectors_JST:JST_PH_S2B-PH-K_02x2.00mm_Angled | J39 |
| 1 | DUT BAT | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | J40 |
| 1 | G0 | TestPoint:TestPoint | TP5 |
| 1 | G1 | TestPoint:TestPoint | TP6 |
| 1 | JST-2P-RA | Connectors_JST:JST_PH_S2B-PH-K_02x2.00mm_Angled | J25 |
| 1 | JUMPER | Jumper:Jumper | JM1 |
| 1 | LED_0 | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm | J3 |
| 1 | LED_0 | TerminalBlocks:3Pin5.08 | J7 |
| 1 | LED_1 | TerminalBlocks:3Pin5.08 | J8 |
| 1 | LED_1 | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm | J4 |
| 1 | LED_2 | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm | J5 |
| 1 | LED_2 | TerminalBlocks:3Pin5.08 | J9 |
| 1 | LED_3 | TerminalBlocks:3Pin5.08 | J10 |
| 1 | LED_3 | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm | J6 |
| 1 | LNJP12X8ARA | LEDs:LED_0805_HandSoldering | D9 |
| 1 | NFET_0 | Pin_Headers:Pin_Header_Straight_2x03_Pitch2.54mm | J13 |
| 1 | NFET_1 | Pin_Headers:Pin_Header_Straight_2x03_Pitch2.54mm | J14 |
| 1 | POWER | TerminalBlocks:2Pin5.08 | J2 |
| 1 | YSS-19-1202-N | YSS-19-1202-N:YSS-19-1202-N | SW5 |
The 178 most common of 182 parts.
More from puskyer/Fixture-Dev-Kit
1Similar boards
- 2 layers95 × 65 mm
- 4 layers146.1 × 55 mm
StarGate MainBoard
plhsystems/stargate-mainboard-esp32
Mainboard for Kristian's stargate projects, based on ESP32-S3
171 parts4 - 2 layers55 × 35 mm
Mini BT Pcb-328P
d-diot/Mini-BT-Pcb-328P
MySensors ATMega328P + RFM69 and NRF24 battery (AAA and CR2032) powered pcb
54 parts3 - 2 layers47.8 × 57.9 mm
ESP8266-LolinV3-Lamp
d-diot/ESP8266-LolinV3-Lamp
A pcb for the NodeMCU Lolin V3 board with power management for a WS2812 LED strip
30 parts2 - 4 layers42 × 42 mm
Stepper Servo
jawher-Mansour/619-J_Stepper
619-J_Stepper is an open source closed loop stepper driver.
69 parts2 - 4 layers99.8 × 97.3 mm
- 2 layers108 × 66.7 mm
RX8 Ashtray Gauges
andrewandneil/rx8-ashtray-gauges
A simplistic set of digital guages for the Mazda RX-8's ashtray.
61 parts1 - 2 layers55 × 55 mm
Questions
How big is the Fixture Dev Kit PCB?
It measures 151 × 130.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Fixture Dev Kit use?
182 parts, built around the LNJP12X8ARA, FDN337N, TL9210AF260Q and NTF2955T1G. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Fixture Dev Kit KiCad files?
From the puskyer/Fixture-Dev-Kit repository on GitHub, at the commit this page was made from: the board is HARDWARE/v0.03/KiCad/Fixture-Dev-Kit.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Fixture Dev Kit design in my own project?
Its repository states no licence, so its author keeps all rights: ask puskyer before reusing the design.