
Panel daisy
ohmtech-rdi/eurorack-blocks
Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust

This is a Kosmo format 'spread' module. It takes a CV input and a Spread input. The Spread input is: added to the CV input and sent to the + output. subtracted from the CV input and sent to the - output.
KosmicSuperspreader is an open-source printed circuit board by Sonosus, from the Sonosus/KosmicSuperspreader repository on GitHub, published under the CC-BY-SA-4.0 licence. It is a 2-layer board of 30 × 95 mm with 28 parts on 18 nets, routed with 152 tracks and 3 vias.
It is built around the TL072. Its parts include 12 resistors, 6 capacitors, 6 connectors and 2 ICs.
View this project on CADLAB.io.
This is a Kosmo format 'spread' module. It takes a CV input and a Spread input. The Spread input is:
The Spread pot is used as an offset for the Spread input if a jack is plugged in, if not the Spread jack is normalled to ground. The offset from the Spread pot swings between 0V and 12V.


There is an error on the silkscreen affecting some PCBs. For the v1.3 PCBs sold on Tindie, please see the build guide above.
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
This project is certified open source hardware.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 100k | Sonosus:Resistor | R1, R2, R3, R4, R5, R6, R7, R8, R9, R10, R11, R12 |
| 4 | 100n | Sonosus:Capacitor_NonPolarized | C3, C4, C5, C6 |
| 2 | 10u | Sonosus:Capacitor_Polarized | C1, C2 |
| 1 | + | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | - | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | BUFFER | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J5 |
| 1 | CV ATT 100K | Sonosus:Potentiometer_Alpha_RD901F-40-00D | RV1 |
| 1 | INPUT | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | SPREAD | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | SPREAD 100K | Sonosus:Potentiometer_Alpha_RD901F-40-00D | RV2 |
| 1 | SYNTH POWER | Sonosus:Power_Header | J6 |
| 1 | TL072 | Sonosus:DIP-8_Socket | U1 |
| 1 | TL074 | Sonosus:DIP-14_Socket | U2 |

ohmtech-rdi/eurorack-blocks
Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust

ctag-fh-kiel/ctag-tbd
CTAG TBD >>to be determined<< an extendible open source Eurorack sound module

plinkysynth/plinky_public
a public release of the plinky sw and hw



matthewcieplak/super-sixteen
Code and schematics for the Super Sixteen Eurorack sequencer

mzuelch/CATs-Eurosynth
Analog Synth Eurorack Modules

StoneRose35/cortexguitarfx
guitar effects processor implemented on various arm cortex platforms
It measures 30 × 95 mm and has 2 copper layers, 1.6 mm thick.
28 parts, built around the TL072. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Sonosus/KosmicSuperspreader repository on GitHub, at the commit this page was made from: the board is PCB/KosmicSuperspreader.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CC-BY-SA-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).