2 layers111.3 × 106.4 mm
Super Sixteen v1
matthewcieplak/super-sixteen
Code and schematics for the Super Sixteen Eurorack sequencer
141 parts171
4 layers20 × 120 mm
HagiwoOscillator
Sonosus/HagiwoOscillator5- Size
- 20 × 120 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 42
- Nets
- 43
- Pads
- 137
- Tracks, vias
- 280, 12
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 26 Jun 2021
- Updated
- 14 Aug 2021
Overview
HagiwoOscillator is an open-source printed circuit board by Sonosus, from the Sonosus/HagiwoOscillator repository on GitHub, published under the CC0-1.0 licence. It is a 4-layer board of 20 × 120 mm with 42 parts on 43 nets, routed with 280 tracks and 12 vias.
It is built around the TL072 and L7805. Its parts include 10 capacitors, 10 resistors, 10 diodes, 6 connectors and 2 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
2
TL072
SOP-8-18V~18V 0℃~+70℃ 1.4mA 1.5nA 10V/us 10mV 2 2.5nA 3MHz 85dB SOP-8 Operational Amplifier ROHSGcoreOperational Amplifier
L7805
TO-220ST0℃~+125℃@(Tj) 1 1.2A 20V 2V@(1A) 42uV 500uA 5V 73dB@(120Hz) Fixed Positive Short Circuit Protection TO-220ST Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSOSENVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
README.mdHagiwoOscillator
Parts
42| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 1N5817 | Sonosus:Diode_DO-35 | D1, D2, D3, D4, D5, D6, D7, D8, D9, D10 |
| 3 | 68n | Sonosus:Capacitor_NonPolarized | C8, C12, C13 |
| 3 | R_POT | Sonosus:Potentiometer_Alpha_RD901F-40-00D_centred | RV1, RV2, RV3 |
| 2 | 100k | Sonosus:Resistor | R6, R10 |
| 2 | 100n | Sonosus:Capacitor_NonPolarized | C6, C7 |
| 2 | 10n | Sonosus:Capacitor_NonPolarized | C4, C5 |
| 2 | 10uF | Sonosus:Capacitor_Polarized | C2, C3 |
| 2 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R12, R13 |
| 2 | 3.9k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R2, R3 |
| 2 | in1 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J5, J6 |
| 1 | 100k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R11 |
| 1 | 100r | Sonosus:Resistor | R5 |
| 1 | 1v/oct | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | 220r | Sonosus:Resistor | R1 |
| 1 | 4.7u | Sonosus:Capacitor_NonPolarized | C1 |
| 1 | 510k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R4 |
| 1 | Arduino_Nano_v3.x | Module:Arduino_Nano | A1 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | Conn_02x05_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | J1 |
| 1 | L7805 | Sonosus:Regulator_TO-220-3 | U2 |
| 1 | TL072 | Sonosus:DIP-8_Socket | U1 |
| 1 | out | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
Similar boards
- 2 layers161.3 × 263.9 mm
DSP 1.1
Owen-Patrick/SoftSynthetics-DSP
Hardware for adapting Karaoke DSP board to eurorack
115 parts10 - 2 layers67.3 × 74.5 mm
- 2 layers242.5 × 102.5 mm
- 2 layers20 × 50 mm
NoiseGen
Sonosus/NoiseGen
This is a pink/white noise generator PCB that uses the Electric Druid NOISE2 chip. It is powered with +-12v and is perfect for use in compact synths.
15 parts5CC-BY-SA-4.0 - 2 layers98 × 98 mm
VCDO
Sonosus/VCDO
A Kosmo oscillator module that uses the Electric Druid VCDO chip.
93 parts4CC-BY-SA-4.0 - 2 layers50 × 110 mm
Ogham merged v1.0
keeos-io/ogham
Ogham — a dual-voice bytebeat synthesizer for Eurorack. Firmware (MIT) and hardware (CC BY-SA 4.0).
109 parts3 - 2 layers122.1 × 128.5 mm
ATS-20
Fihdi/ATS-20-Eurorack
A clone of the ATS 20 from PU2CLR in Eurorack Format (3U height). The circuit contains jumpers to switch between standalone mode and Eurorack.
81 parts2
Questions
How big is the HagiwoOscillator PCB?
It measures 20 × 120 mm and has 4 copper layers, 1.6 mm thick.
What parts does the HagiwoOscillator use?
42 parts, built around the TL072 and L7805. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the HagiwoOscillator KiCad files?
From the Sonosus/HagiwoOscillator repository on GitHub, at the commit this page was made from: the board is HagiwoOscillator.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the HagiwoOscillator design in my own project?
Its repository publishes it under the CC0-1.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).