2 layers130 × 80 mm
2 layers47 × 27.9 mm
SDRMod
sofwerx/SDR_RadioA Software Defined Radio (SDR) Moto Mod for analog and digital radio communication: FM, voice, data, IoT networks, spectrum monitoring, security auditing. You can even use your smartphone as a satellite communicator!
- Size
- 47 × 27.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 30
- Nets
- 21
- Pads
- 103
- Tracks, vias
- 20, 4
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 7 Jun 2018
- Updated
- 1 Mar 2017
Overview
SDRMod is an open-source printed circuit board by sofwerx, from the sofwerx/SDR_Radio repository on GitHub. It is a 2-layer board of 47 × 27.9 mm with 30 parts on 21 nets, routed with 20 tracks and 4 vias.
It is built around the BAV99. Its parts include 16 capacitors, 2 diodes, 1 IC, 1 connector and 1 crystal.
Main components
1README
README.mdSDR_Radio
Software Defined Radio Moto Mod
A Software Defined Radio (SDR) Moto Mod for analog and digital radio communication: FM, voice, data, IoT networks, spectrum monitoring, security auditing. You can even use your smartphone as a satellite communicator!
This is a repository for the following project:
Parts
30| Qty | Value | Footprint | References |
|---|---|---|---|
| 15 | C | Capacitors_SMD:C_0603_HandSoldering | C6, C9, C10, CA1, CA2, CB2, CC1, CC2, CF1, CG1, CG2, CM1, CM2, CT1, CT2 |
| 7 | L | Inductors_SMD:L_0603_HandSoldering | LB1, LB2, LC1, LC2, LF1, LT1, LT2 |
| 2 | BAV99 | Diodes_SMD:D_SCD80_HandSoldering | D2, D3 |
| 1 | AX5043 | Housings_DFN_QFN:QFN-28-1EP_5x6mm_Pitch0.5mm | U1 |
| 1 | Antenna_Shield | Connectors:SMB_Straight | AE1 |
| 1 | CONN_02X04 | Pin_Headers:Pin_Header_Straight_2x04_Pitch2.00mm_SMD | P1 |
| 1 | CP | Capacitors_SMD:CP_Elec_3x5.3 | C11 |
| 1 | Crystal | Crystals:Crystal_SMD_5032-2pin_5.0x3.2mm_HandSoldering | Y1 |
| 1 | LOSC | Inductors_SMD:L_0603_HandSoldering | LT3 |
Questions
How big is the SDRMod PCB?
It measures 47 × 27.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the SDRMod use?
30 parts, built around the BAV99. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the SDRMod KiCad files?
From the sofwerx/SDR_Radio repository on GitHub, at the commit this page was made from: the board is AX5043/SDRMod.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the SDRMod design in my own project?
Its repository states no licence, so its author keeps all rights: ask sofwerx before reusing the design.
Similar boards
- 4 layers93.2 × 62.4 mm
Compute module
magkopian/raspberry-pi-compute-module-base-board
Base board for the Raspberry Pi Compute Module
66 parts214GPL-3.0 - 4 layers65 × 56 mm
- 2 layers100 × 68 mm
- 4 layers87.1 × 78.2 mm
- 2 layers170.1 × 96.9 mm
SmartPrintCoreH7x
BoltzRnD/SmartPrintCoreH7x
STM32H7 based Robust and Open Source 3D Printer Mainboard
567 parts89 - 4 layers43.4 × 25.4 mm
R820t2 breakout
emeb/r820t2
Breakout PCB design and STM32F0 firmware for the Rafael R820T2 tuner chip
83 parts85 - 4 layers62.5 × 83.8 mm
