magkopian/raspberry-pi-compute-module-base-board214Base board for the Raspberry Pi Compute Module
Compute module is an open-source printed circuit board by magkopian, from the magkopian/raspberry-pi-compute-module-base-board repository on GitHub, published under the GPL-3.0 licence. It is a 4-layer board of 93.2 × 62.4 mm with 66 parts on 146 nets, routed with 1,349 tracks and 251 vias.
It is built around the REG1117-3.3, REG1117A-1.8G4 and BAV99, with the 2N7002P,215(ES), BAT54 and 2001-1-2-21-00-BK among its other parts. Its parts include 23 capacitors, 15 resistors, 10 diodes, 6 connectors and 3 transistors. It belongs with the computers and single-board computers boards of this library.
These are the design files for a circuit board intended to be used as a base for other custom PCB designs that make use of the Raspberry Pi Compute Module.
If you want to design a custom PCB based on the Raspberry Pi Compute Module but you have never done it before, this project can serve as a starting point. The board is designed on KiCAD which is an open source and cross-platform EDA software, in order to allow as many people as possible to take advantage of it.
More information about the project can be found on Instructables.
Raspberry Pi Compute Module Base Board
Copyright (C) 2018 Manolis Agkopian
This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version.
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
You should have received a copy of the GNU General Public License along with this program. If not, see https://www.gnu.org/licenses/.
This project makes use of the CM schematic symbols and DDR2 SODIMM fooprint designed by Joan The Spark and distrubuted under the GNU General Public License Version 3.
It also makes use of the HDMI connector schematic symbol from the Digikey KiCAD Library repository which is distrubuted under the Creative Commons CC-BY-SA 4.0.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 14 | 100nF | Capacitors_SMD:C_0402 | C1, C2, C3, C4, C5, C6, C7, C8, C9, C12, C13, C17, C18, C19 |
| 6 | BAV99 | TO_SOT_Packages_SMD:SOT-23 | D4, D5, D6, D7, D9, D10 |
| 5 | 10uF | Capacitors_Tantalum_SMD:CP_Tantalum_Case-C_EIA-6032-28_Reflow | C10, C11, C14, C15, C16 |
| 4 | 1.8K | Resistors_SMD:R_0603_HandSoldering | R4, R5, R9, R10 |
| 4 | 100K | Resistors_SMD:R_0603_HandSoldering | R1, R6, R7, R8 |
| 3 | 1K | Resistors_SMD:R_0603_HandSoldering | R2, R3, R11 |
| 2 | 10uF | Capacitors_SMD:C_0805 | C20, C21 |
| 2 | 150R | Resistors_SMD:R_0603_HandSoldering | R12, R13 |
| 2 | 270R | Resistors_SMD:R_0603_HandSoldering | R14, R15 |
| 2 | 2N7002P.215 | TO_SOT_Packages_SMD:SOT-23 | Q1, Q3 |
| 2 | 33nF | Capacitors_SMD:C_0402 | C22, C23 |
| 2 | BAT54 | TO_SOT_Packages_SMD:SOT-23 | D2, D3 |
| 1 | 2001-1-2-21-00-BK | HDMI_MOLEX:HDMI_MOLEX_471510001 | J1 |
| 1 | 2A 6V | Polyfuse_Bourns_MF-PSML:Polyfuse_0805 | F1 |
| 1 | Board_RPi_CM3_200pConnector_multipart | Conn_TE-DDR2-SODIMM:Conn_TE-DDR2-SODIMM-0.6-200P-doublesided | MD1 |
| 1 | CAM1 | ffc_conn:FPC_22 | P3 |
| 1 | CONN_02X20 | Pin_Headers:Pin_Header_Straight_2x20 | P4 |
| 1 | DMP3056L-7 | TO_SOT_Packages_SMD:SOT-23 | Q2 |
| 1 | GREEN LED | LEDs:LED_0805 | D1 |
| 1 | HOST | Connectors:USB_A | P2 |
| 1 | JC-128 | jc-128:JC-128 | J2 |
| 1 | POWER | Connectors:USB_Micro-B | P1 |
| 1 | RED LED | LEDs:LED_0805 | D8 |
| 1 | REG1117-3.3 | TO_SOT_Packages_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | REG1117A-1.8 | TO_SOT_Packages_SMD:SOT-223-3_TabPin2 | U3 |
The 61 most common of 66 parts.
It measures 93.2 × 62.4 mm and has 4 copper layers, 1.6 mm thick.
66 parts, built around the REG1117-3.3, REG1117A-1.8G4, BAV99 and 2N7002P,215(ES). The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the magkopian/raspberry-pi-compute-module-base-board repository on GitHub, at the commit this page was made from: the board is compute_module.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
SunnyYoshimitsu/Reconfigurable-Space-Compute-Cluster
Here will be the repository for an "extremely reconfigurable satellite" aimed toward at competing in NASA Minds and hopefully assist Artemis in its missions.
TylerJulian/STM32F103RCT6-Dev-Board
A stm32f103RCT6 Breakout board for Sooner Competitive Robotics and Personal use.
michaellangford99/ECE47700
Placeholder for eventual Github Pages display of course information
atomspring/Moto-Turn-signals
Enhances old motorcycle visibility by running turn signals at low current until needed. LED & Incandescent compatible.