Skip to the content
2 layers25 × 21.6 mmTp4056-ls, the printed circuit board in 3D

Tp4056-ls

smkent/pcb

PCB designs

Size
25 × 21.6 mm
Copper layers
2
Thickness
1.6 mm
Parts
24
Nets
16
Pads
78
Tracks, vias
68, 3
Pours
10
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
22 Mar 2024
Updated
11 Sep 2026

Overview

Tp4056-ls is an open-source printed circuit board by smkent, from the smkent/pcb repository on GitHub, published under the CC-BY-SA-4.0 licence. It is a 2-layer board of 25 × 21.6 mm with 24 parts on 16 nets, routed with 68 tracks and 3 vias.

It is built around the TP4056, XB5350D0 and AO3401A, with the SS34 among its other parts. Its parts include 7 connectors, 3 capacitors, 3 diodes, 2 resistors and 2 ICs.

Main components

4

README

README.md

PCB designs

A monorepository of my PCB designs created with KiCAD 8.

Layout and Workflow

Custom symbols and footprints are located in libraries, which is shared between PCB projects using ${KIPRJMOD}.

Individual PCB projects (e.g. *.kicad_pro and friends) are located within within pcb for active projects, or pcb-archived for archived projects.

When a PCB is ordered from a project, fabrication outputs are created and in the project's fab subdirectory and committed to the repository.

Setup

Ensure pipx is installed:

sh
pip install pipx

Install scons:

sh
pipx install scons

Install KiCAD-related dependencies using the system site packages directory:

sh
pipx install --system-site-packages kikit interactivehtmlbom

Build

To render all outputs, simply run scons.

To render outputs for a particular board, run scons -u within that board's project subdirectory.

Licenses

Individual hardware designs in this repository may use different licenses. The following licenses apply unless an included design directory specifies different license(s).

The lcsc KiCAD symbols, footprints, and 3D models libraries were created using easyeda2kicad (pypi), which are from LCSC. More info about easyeda2kicad

Parts

24
QtyValueFootprintReferences
3Conn_01x01custom:PinHeader_1x01_P2.54mm_simple_squareJ2, J4, J6
3Conn_01x01custom:PinHeader_1x01_P2.54mm_simpleJ1, J3, J5
210uFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC1, C2
10.1uFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC3
1100RResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR2
110KResistor_SMD:R_Array_Convex_4x0603RN1
11K2Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR1
15K1Resistor_SMD:R_Array_Convex_4x0603RN2
1AO3401APackage_TO_SOT_SMD:SOT-23Q1
1Battery_Cellcustom:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical_simpleBT1
1Chargecustom:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder_simpleLED1
1Donecustom:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder_simpleLED2
1LOGOgraphics:icon-check-mark-circle-2mmG***
1LOGOgraphics:oshw-logo-5mmG***
1LOGOgraphics:icon-lightning-bolt-2mmG***
1SS34custom:D_SMA_simpleD3
1TP4056custom:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm_ThermalVias_CustomViasU1
1USB_C_Receptacle_PowerOnly_6Pcustom:USB_C_Receptacle_GCT_USB4125-xx-x_6P_TopMnt_Horizontal_handsolderJ0
1XB5350D0custom:SOT-23-5_simpleU2

More from smkent/pcb

12
  • 2 layers100 × 66 mmEsp av, the printed circuit board in 3D

    Esp av

    smkent/pcb

    PCB designs

    160 partsCC-BY-SA-4.0
  • 2 layers82 × 40 mmEsp av, the printed circuit board in 3D

    Esp av

    smkent/pcb

    PCB designs

    106 partsCC-BY-SA-4.0
  • 2 layers100 × 32 mmUps-5v, the printed circuit board in 3D

    Ups-5v

    smkent/pcb

    PCB designs

    87 partsCC-BY-SA-4.0
  • 2 layers66 × 32 mmEsp rgb driver, the printed circuit board in 3D

    Esp rgb driver

    smkent/pcb

    PCB designs

    73 partsCC-BY-SA-4.0
  • 2 layers69 × 20 mmIp5209-ups, the printed circuit board in 3D

    Ip5209-ups

    smkent/pcb

    PCB designs

    67 partsCC-BY-SA-4.0
  • 2 layers16 × 32 mmReflow, the printed circuit board in 3D

    Reflow

    smkent/pcb

    PCB designs

    65 partsCC-BY-SA-4.0
  • 2 layers110 × 44 mmIp5306-ups, the printed circuit board in 3D

    Ip5306-ups

    smkent/pcb

    PCB designs

    64 partsCC-BY-SA-4.0
  • 2 layers66 × 32 mmEsp-3dp, the printed circuit board in 3D

    Esp-3dp

    smkent/pcb

    PCB designs

    63 partsCC-BY-SA-4.0
  • 2 layers40 × 40 mmEsp-3dp, the printed circuit board in 3D

    Esp-3dp

    smkent/pcb

    PCB designs

    57 partsCC-BY-SA-4.0
  • 2 layers66 × 32 mmEsp cwww, the printed circuit board in 3D

    Esp cwww

    smkent/pcb

    PCB designs

    55 partsCC-BY-SA-4.0

Similar boards

  • 6 layers64.8 × 69.9 mmEzDV, the printed circuit board in 3D

    EzDV

    tmiw/ezDV

    A FreeDV device based on the ESP32.

    130 parts114
  • 2 layers35 × 100 mmWalkieTalkie, the printed circuit board in 3D

    WalkieTalkie

    GuzziFlipFlops/ESP32-Walkie-Talkie

    An open source ESPNOW based walkie talkie with a 600 meter tested distance, with an OLED and multiple buttons to interact with

    66 parts7MIT
  • 2 layers150 × 40 mmBicopter, the printed circuit board in 3D

    Bicopter

    InputBlackBoxOutput/Bicopter

    Design files for a PCB Bicopter

    79 parts1MIT
  • 2 layers131 × 100 mmPanel, the printed circuit board in 3D

    Panel

    RamRamAndroid/ESP32Drone-CodeMatrix

    ESP32 Drone by CodeMatrix is a compact, WiFi-controlled drone based on the ESP32-S3 microcontroller. Designed for hobbyists, makers, and engineers, ESP32 Drone by CodeMatrix offers a simple yet powerful platform for…

    182 parts1
  • 2 layers100.4 × 99.2 mmEspdroneea, the printed circuit board in 3D

    Espdroneea

    sushrutchhatkuli/Custom-ESP32-drone-PCB

    Designed a custom ESP32-WROOM-32–based drone flight controller PCB featuring USB-C charging, regulated 3.3 V power delivery, and onboard IMU sensing using the MPU-6050.

    121 parts1
  • 2 layers43 × 64 mmCykloPCB v1, the printed circuit board in 3D

    CykloPCB v1

    Alwwex/Cyklopo-ta-

    Nosná deska 43 × 64 mm, na kterou se připájí Waveshare ESP32-C3-Zero, připojí displej, GPS a Li-Po baterie. Řeší všechno, co na nepájivém poli chybělo: nabíjení přes USB-C s „power-path“, vypínač, 3,3 V stabilizátor…

    44 parts
  • 2 layers151 × 95 mmDeneme, the printed circuit board in 3D

    Deneme

    g210101021/OpenStylophone-RP2040

    Overview • Technical Summary • Architecture • Hardware Audit & Remediation • Schematic Subsystems • PCB Layout • Firmware Roadmap • Bill of Materials • Author

    143 parts
  • 2 layers62 × 6 mmTableLight, the printed circuit board in 3D

    TableLight

    jonny190/TableLight

    A 3D-printable, battery-powered, USB-C rechargeable table lamp in the classic "Poldina" shape - honeycomb disc base, thin stem, down-firing cone shade with a white top - running WLED on an ESP32, with a capacitive touch…

    72 partsMIT

Questions

How big is the Tp4056-ls PCB?

It measures 25 × 21.6 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Tp4056-ls use?

24 parts, built around the TP4056, XB5350D0, AO3401A and SS34. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Tp4056-ls KiCad files?

From the smkent/pcb repository on GitHub, at the commit this page was made from: the board is pcb-archived/power/tp4056-ls/tp4056-ls.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Tp4056-ls design in my own project?

Its repository publishes it under the CC-BY-SA-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).