Skip to the content
2 layers38.1 × 22.9 mmShift register jig, the printed circuit board in 3D

Shift register jig

smkent/pcb

PCB designs

Size
38.1 × 22.9 mm
Copper layers
2
Thickness
1.6 mm
Parts
26
Nets
41
Pads
110
Tracks, vias
191, 10
Pours
1
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
22 Mar 2024
Updated
11 Sep 2026

Overview

Shift register jig is an open-source printed circuit board by smkent, from the smkent/pcb repository on GitHub, published under the CC-BY-SA-4.0 licence. It is a 2-layer board of 38.1 × 22.9 mm with 26 parts on 41 nets, routed with 191 tracks and 10 vias.

It is built around the 74HC595. Its parts include 16 diodes, 3 connectors, 2 ICs and 1 resistor.

Main components

1

README

README.md

PCB designs

A monorepository of my PCB designs created with KiCAD 8.

Layout and Workflow

Custom symbols and footprints are located in libraries, which is shared between PCB projects using ${KIPRJMOD}.

Individual PCB projects (e.g. *.kicad_pro and friends) are located within within pcb for active projects, or pcb-archived for archived projects.

When a PCB is ordered from a project, fabrication outputs are created and in the project's fab subdirectory and committed to the repository.

Setup

Ensure pipx is installed:

sh
pip install pipx

Install scons:

sh
pipx install scons

Install KiCAD-related dependencies using the system site packages directory:

sh
pipx install --system-site-packages kikit interactivehtmlbom

Build

To render all outputs, simply run scons.

To render outputs for a particular board, run scons -u within that board's project subdirectory.

Licenses

Individual hardware designs in this repository may use different licenses. The following licenses apply unless an included design directory specifies different license(s).

The lcsc KiCAD symbols, footprints, and 3D models libraries were created using easyeda2kicad (pypi), which are from LCSC. More info about easyeda2kicad

Parts

26
QtyValueFootprintReferences
16LEDcustom:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder_simpleLED1, LED2, LED3, LED4, LED5, LED6, LED7, LED8, LED9, LED10, LED11, LED12, LED13, LED14, LED15, LED16
41KResistor_SMD:R_Array_Convex_4x0603RN1, RN2, RN3, RN4
274HC595Package_SO:SOIC-16_3.9x9.9mm_P1.27mmU1, U2
2Conn_01x02custom:PinHeader_1x02_P2.54mm_Vertical_simple_pad2gndJ1, J5
110KResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR1
1Conn_01x08custom:PinHeader_1x08_P2.54mm_Vertical_simple_pad2gndJ2

More from smkent/pcb

12
  • 2 layers100 × 66 mmEsp av, the printed circuit board in 3D

    Esp av

    smkent/pcb

    PCB designs

    160 partsCC-BY-SA-4.0
  • 2 layers82 × 40 mmEsp av, the printed circuit board in 3D

    Esp av

    smkent/pcb

    PCB designs

    106 partsCC-BY-SA-4.0
  • 2 layers100 × 32 mmUps-5v, the printed circuit board in 3D

    Ups-5v

    smkent/pcb

    PCB designs

    87 partsCC-BY-SA-4.0
  • 2 layers66 × 32 mmEsp rgb driver, the printed circuit board in 3D

    Esp rgb driver

    smkent/pcb

    PCB designs

    73 partsCC-BY-SA-4.0
  • 2 layers69 × 20 mmIp5209-ups, the printed circuit board in 3D

    Ip5209-ups

    smkent/pcb

    PCB designs

    67 partsCC-BY-SA-4.0
  • 2 layers16 × 32 mmReflow, the printed circuit board in 3D

    Reflow

    smkent/pcb

    PCB designs

    65 partsCC-BY-SA-4.0
  • 2 layers110 × 44 mmIp5306-ups, the printed circuit board in 3D

    Ip5306-ups

    smkent/pcb

    PCB designs

    64 partsCC-BY-SA-4.0
  • 2 layers66 × 32 mmEsp-3dp, the printed circuit board in 3D

    Esp-3dp

    smkent/pcb

    PCB designs

    63 partsCC-BY-SA-4.0
  • 2 layers40 × 40 mmEsp-3dp, the printed circuit board in 3D

    Esp-3dp

    smkent/pcb

    PCB designs

    57 partsCC-BY-SA-4.0
  • 2 layers66 × 32 mmEsp cwww, the printed circuit board in 3D

    Esp cwww

    smkent/pcb

    PCB designs

    55 partsCC-BY-SA-4.0

Similar boards

  • 2 layers45.7 × 31.8 mmLEDx16 board, the printed circuit board in 3D

    LEDx16 board

    tardate/LittleArduinoProjects

    a collection of "Little Electronic & Arduino Projects", most involving electronics or an Arduino in one way or another!

    36 parts803MIT
  • 2 layers228.6 × 100 mmMongus48, the printed circuit board in 3D

    Mongus48

    ChrisChrisLoLo/beyblock20

    The magnetic, modular, 20-key macropad that can join together to form an ortholinear board

    124 parts335GPL-3.0
  • 2 layers245.1 × 160 mm8-Bit CPU 32k, the printed circuit board in 3D

    8-Bit CPU 32k

    slu4coder/Minimal-64x4-Home-Computer

    My DIY TTL home computer with VGA and PS/2 and 4x the processing power of a Commodore C64 or Apple II.

    139 parts326
  • 2 layers100 × 95.1 mmProtoboard-6x4-breakout, the printed circuit board in 3D

    Protoboard-6x4-breakout

    electroniceel/protoboard

    Advanced protoboard layout with 1.27mm pitch for smd parts

    4,745 parts311CC-BY-4.0
  • 4 layers140 × 100 mmDc usv, the printed circuit board in 3D

    Dc usv

    TobleMiner/DC-UPS

    A small DC UPS, designed to keep small appliances like consumer network equipment running during power outages

    351 parts223CERN-OHL-P-2.0
  • 2 layers100.5 × 218.3 mmTraktorino, the printed circuit board in 3D

    Traktorino

    silveirago/traktorino

    The open-source DIY MIDI Controller for DJs.

    96 parts220
  • 2 layers287.8 × 126.7 mmNoName, the printed circuit board in 3D

    NoName

    AlaaSaadAbdo/battoota

    Keyboards

    267 parts188
  • 2 layers100 × 100 mmTommyPROM32-595, the printed circuit board in 3D

    TommyPROM32-595

    TomNisbet/TommyPROM

    Simple Arduino-based EEPROM programmer

    36 parts187

Questions

How big is the Shift register jig PCB?

It measures 38.1 × 22.9 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Shift register jig use?

26 parts, built around the 74HC595. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Shift register jig KiCad files?

From the smkent/pcb repository on GitHub, at the commit this page was made from: the board is pcb/jigs/shift-register-jig/shift-register-jig.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Shift register jig design in my own project?

Its repository publishes it under the CC-BY-SA-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).