

Boost mt3608
PCB designs
- Size
- 30.7 × 15.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 13
- Nets
- 7
- Pads
- 30
- Tracks, vias
- 17, 2
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 22 Mar 2024
- Updated
- 11 Sep 2026
Overview
Boost mt3608 is an open-source printed circuit board by smkent, from the smkent/pcb repository on GitHub, published under the CC-BY-SA-4.0 licence. It is a 2-layer board of 30.7 × 15.5 mm with 13 parts on 7 nets, routed with 17 tracks and 2 vias.
It is built around the MT3608 and SS34. Its parts include 3 capacitors, 3 resistors, 3 connectors, 2 diodes and 1 IC.
Main components
2README
README.mdPCB designs
A monorepository of my PCB designs created with KiCAD 8.
Layout and Workflow
Custom symbols and footprints are located in libraries, which
is shared between PCB projects using ${KIPRJMOD}.
Individual PCB projects (e.g. *.kicad_pro and friends) are located within
within pcb for active projects, or
pcb-archived for archived projects.
When a PCB is ordered from a project, fabrication outputs are created and
in the project's fab subdirectory and committed to the repository.
Setup
Ensure pipx is installed:
pip install pipxInstall scons:
pipx install sconsInstall KiCAD-related dependencies using the system site packages directory:
pipx install --system-site-packages kikit interactivehtmlbomBuild
To render all outputs, simply run scons.
To render outputs for a particular board, run scons -u within that board's
project subdirectory.
Licenses
Individual hardware designs in this repository may use different licenses. The following licenses apply unless an included design directory specifies different license(s).
- Hardware materials and designs are licensed under CERN Open Hardware License version 2.0 Permissive (CERN-OHL-P v2) (text). The version control history of this repository serves as the changes file.
- Software is licensed under the GNU General Public License v3.0 (GPL-3.0) (text)
- All documentation is licensed under Creative Commons Attribution-ShareAlike 4.0 International (CC-BY-SA-4.0) (text)
The lcsc KiCAD symbols,
footprints, and 3D models
libraries were created using easyeda2kicad
(pypi), which are from LCSC. More info about
easyeda2kicad
Parts
13| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | Conn_01x02 | custom:PinHeader_1x02_P2.54mm_Vertical_simple_pad2gnd | J1, J2, J3 |
| 2 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R3 |
| 1 | 10uF | custom:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3 |
| 1 | 22uF | custom:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1 |
| 1 | 22uH | custom:Inductor_Multi_5.2x5.7_2x2.5 | L1 |
| 1 | 22uf | custom:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C2 |
| 1 | 75K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | Boost | custom:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder_simple | LED1 |
| 1 | MT3608 | Package_TO_SOT_SMD:SOT-23-6 | U1 |
| 1 | SS34 | custom:D_SMA_simple | D1 |
More from smkent/pcb
12- 2 layers100 × 66 mm

- 2 layers82 × 40 mm

- 2 layers100 × 32 mm

- 2 layers40 × 40 mm

- 2 layers40 × 40 mm

- 2 layers66 × 32 mm

- 2 layers69 × 20 mm

- 2 layers16 × 32 mm

- 2 layers110 × 44 mm

- 2 layers66 × 32 mm

- 2 layers40 × 40 mm

- 2 layers66 × 32 mm

Similar boards
- 2 layers308.7 × 241.8 mm

OTTOtact
cester-ino/OTTO-hardware
those specs refer to the tactile buttons version, but a led backlight button version is in the works too.
229 parts49GPL-3.0 - 2 layers79.2 × 68.8 mm

Environment slave
pcbcupid/Lora-Wireless-Sensor-Network
A wireless sensor network based on Lora and esp32C3. This repo will help you build a complete product from scratch to finish!
72 parts30MIT - 4 layers83 × 83 mm

PWNSAT
Pwnsat/PWNCUBE
PWNCUBE v1.0 is a Cubesat hardware based platform for aerospace cybersecurity research
139 parts29 - 2 layers60 × 40 mm

Forcegauge
szbeni/forcegauge
Traning for climbing. Load cell with HX711 and real time plotting,
77 parts18GPL-3.0 - 2 layers77.2 × 67.9 mm

Transistor tester
vitaliy-bobrov/avr-transistor-tester
Component/Transistor tester based on famous AVR Transistor Tester
66 parts12 - 2 layers61 × 61 mm

ESP32 FC
MAATHES-THILAK-K/ESP32-S3_FLIGHT_CONTROLLER
A custom-designed flight controller based on the ESP32-S3 module, built for compatibility with the esp-fc firmware and Betaflight-like configuration.
69 parts7Apache-2.0 - 4 layers100 × 80 mm

Plc board
denorath-sys/gridnet
Open hardware powerline mesh communication terminal
62 parts5CERN-OHL-W-2.0 - 2 layers65 × 56.5 mm

PiSupply
enwi/PiSupply
Uninterruptable power supply for Raspberry Pi's, which can also power external HDDs
80 parts4LGPL-3.0
Questions
How big is the Boost mt3608 PCB?
It measures 30.7 × 15.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Boost mt3608 use?
13 parts, built around the MT3608 and SS34. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Boost mt3608 KiCad files?
From the smkent/pcb repository on GitHub, at the commit this page was made from: the board is pcb-archived/power/boost-mt3608/boost-mt3608.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Boost mt3608 design in my own project?
Its repository publishes it under the CC-BY-SA-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).