smatuu/comienzo-de-githubLuca Rele is an open-source printed circuit board by smatuu, from the smatuu/comienzo-de-github repository on GitHub. It is a 2-layer board with 246 parts on 71 nets, routed with 1,032 tracks and 0 vias.
Its parts include 72 resistors, 48 diodes, 36 ICs, 36 connectors and 30 switches. It belongs with the ESP32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 24 | 10k | Resistor_SMD:R_0805_2012Metric | R3, R3, R3, R3, R3, R3, R4, R4, R4, R4, R10, R10, R10, R10, R10, R10 +8 |
| 24 | 1K | Resistor_SMD:R_0805_2012Metric | R1, R1, R1, R1, R1, R1, R2, R2, R2, R2, R2, R2, R7, R7, R7, R7 +8 |
| 24 | 2N2222 | Package_TO_SOT_SMD:SOT-23 | Q1, Q1, Q1, Q1, Q1, Q1, Q2, Q2, Q2, Q2, Q2, Q2, Q3, Q3, Q3, Q3 +8 |
| 24 | 330 | Resistor_SMD:R_0805_2012Metric | R11, R11, R11, R11, R11, R11, R12, R12, R12, R12, R12, R12, R13, R13, R13, R13 +8 |
| 24 | D | Diode_SMD:D_SMA | D3, D3, D3, D3, D3, D3, D4, D4, D4, D4, D4, D4, D7, D7, D7, D7 +8 |
| 24 | LED | LED_SMD:LED_0805_2012Metric | D1, D1, D1, D1, D1, D1, D2, D2, D2, D2, D2, D2, D5, D5, D5, D5 +8 |
| 24 | PC817 | Package_DIP:DIP-4_W7.62mm | U1, U1, U1, U1, U1, U1, U2, U2, U2, U2, U2, U2, U3, U3, U3, U3 +8 |
| 24 | RELAY_C | EESTN5:Relay_C | K1, K1, K1, K1, K1, K1, K2, K2, K2, K2, K2, K2, K3, K3, K3, K3 +8 |
| 18 | Screw_Terminal_01x03 | TerminalBlock:TerminalBlock_MaiXu_MX126-5.0-03P_1x03_P5.00mm | J1, J1, J1, J1, J1, J1, J2, J2, J2, J2, J2, J2, J3, J3, J3, J3 +2 |
| 6 | CERRADURA | TerminalBlock:TerminalBlock_MaiXu_MX126-5.0-03P_1x03_P5.00mm | J4, J4, J4, J4, J4, J4 |
| 6 | ESP32-DEVKITC-32D | OZUNA:esp32(2,3cm) | U7, U7, U7, U7, U7, U7 |
| 6 | LM7805_TO220 | Package_TO_SOT_SMD:TO-263-2 | U6, U6, U6, U6, U6, U6 |
| 6 | SW_SPST | EESTN5:Pin_Header_2 | SW1, SW1, SW1, SW1, SW1, SW1 |
| 6 | Screw_Terminal_01x02 | EESTN5:BORNERA2_AZUL | J6, J6, J6, J6, J6, J6 |
| 6 | pinera i2c | EESTN5:pin_strip_4 | J5, J5, J5, J5, J5, J5 |
BerkeleyHCI/PolymorphicBlocks
A Python-based hardware description language for PCBs for higher-level (block-diagram / system-architecture level) PCB design through libraries of directly reusable subcircuit generators.
robin7331/pixel-pump-motor-board
See iBOM rendered as Page via GitHub Pages
jpskenn/Nora
Narrow pitch keyboard with Choc switches and keycaps. GH60 compatible.
246 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the smatuu/comienzo-de-github repository on GitHub, at the commit this page was made from: the board is HARDWARE/Rele/Luca-Rele.kicad_pcb and its schematic HARDWARE/Rele/Luca-Rele.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask smatuu before reusing the design.