smatuu/comienzo-de-githubLuca Rele is an open-source printed circuit board by smatuu, from the smatuu/comienzo-de-github repository on GitHub. It is a 2-layer board with 246 parts on 71 nets, routed with 1,032 tracks and 0 vias.
Its parts include 72 resistors, 48 diodes, 36 ICs, 36 connectors and 30 switches. It belongs with the ESP32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 24 | 10k | Resistor_SMD:R_0805_2012Metric | R3, R3, R3, R3, R3, R3, R4, R4, R4, R4, R10, R10, R10, R10, R10, R10 +8 |
| 24 | 1K | Resistor_SMD:R_0805_2012Metric | R1, R1, R1, R1, R1, R1, R2, R2, R2, R2, R2, R2, R7, R7, R7, R7 +8 |
| 24 | 2N2222 | Package_TO_SOT_SMD:SOT-23 | Q1, Q1, Q1, Q1, Q1, Q1, Q2, Q2, Q2, Q2, Q2, Q2, Q3, Q3, Q3, Q3 +8 |
| 24 | 330 | Resistor_SMD:R_0805_2012Metric | R11, R11, R11, R11, R11, R11, R12, R12, R12, R12, R12, R12, R13, R13, R13, R13 +8 |
| 24 | D | Diode_SMD:D_SMA | D3, D3, D3, D3, D3, D3, D4, D4, D4, D4, D4, D4, D7, D7, D7, D7 +8 |
| 24 | LED | LED_SMD:LED_0805_2012Metric | D1, D1, D1, D1, D1, D1, D2, D2, D2, D2, D2, D2, D5, D5, D5, D5 +8 |
| 24 | PC817 | Package_DIP:DIP-4_W7.62mm | U1, U1, U1, U1, U1, U1, U2, U2, U2, U2, U2, U2, U3, U3, U3, U3 +8 |
| 24 | RELAY_C | EESTN5:Relay_C | K1, K1, K1, K1, K1, K1, K2, K2, K2, K2, K2, K2, K3, K3, K3, K3 +8 |
| 18 | Screw_Terminal_01x03 | TerminalBlock:TerminalBlock_MaiXu_MX126-5.0-03P_1x03_P5.00mm | J1, J1, J1, J1, J1, J1, J2, J2, J2, J2, J2, J2, J3, J3, J3, J3 +2 |
| 6 | CERRADURA | TerminalBlock:TerminalBlock_MaiXu_MX126-5.0-03P_1x03_P5.00mm | J4, J4, J4, J4, J4, J4 |
| 6 | ESP32-DEVKITC-32D | OZUNA:esp32(2,3cm) | U7, U7, U7, U7, U7, U7 |
| 6 | LM7805_TO220 | Package_TO_SOT_SMD:TO-263-2 | U6, U6, U6, U6, U6, U6 |
| 6 | SW_SPST | EESTN5:Pin_Header_2 | SW1, SW1, SW1, SW1, SW1, SW1 |
| 6 | Screw_Terminal_01x02 | EESTN5:BORNERA2_AZUL | J6, J6, J6, J6, J6, J6 |
| 6 | pinera i2c | EESTN5:pin_strip_4 | J5, J5, J5, J5, J5, J5 |
246 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the smatuu/comienzo-de-github repository on GitHub, at the commit this page was made from: the board is HARDWARE/Rele/Luca-Rele.kicad_pcb and its schematic HARDWARE/Rele/Luca-Rele.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask smatuu before reusing the design.
BerkeleyHCI/PolymorphicBlocks
A Python-based hardware description language for PCBs for higher-level (block-diagram / system-architecture level) PCB design through libraries of directly reusable subcircuit generators.
robin7331/pixel-pump-motor-board
See iBOM rendered as Page via GitHub Pages
jpskenn/Nora
Narrow pitch keyboard with Choc switches and keycaps. GH60 compatible.
