

Smaller card
- Size
- 229.9 × 83.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 246
- Nets
- 978
- Pads
- 2,153
- Tracks, vias
- 1,665, 47
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 18 Aug 2024
- Updated
- 8 Nov 2025
Overview
Smaller card is an open-source printed circuit board by ethanjamesauto, from the ethanjamesauto/modular_8bit_computer repository on GitHub. It is a 2-layer board of 229.9 × 83.8 mm with 246 parts on 978 nets, routed with 1,665 tracks and 47 vias.
It is built around the A13, 74LS245SC and 74LS273PC, with the 74LS14PC, 74LVC1G08Z and NA555D among its other parts. Its parts include 87 resistors, 40 diodes, 20 connectors, 8 ICs and 5 capacitors.
Main components
6A13
TQFP-176(20x20)TQFP-176(20x20) Microcontrollers (MCU/MPU/SOC) ROHSAllwinner TechMicrocontroller Units (MCUs/MPUs/SOCs)74LS245SC
-0℃~+70℃ 12ns@5V,45pF 15mA 24mA 4.75V~5.25V 74LS 8 Bidirectional Output enable Schmitt trigger Tri-State - Buffers, Drivers, Receivers, Transceivers ROHSTexas InstrumentsBuffers, Drivers, Receivers, Transceivers74LS273PC
PDIP-201 15ns 27mA 27ns@5V,15pF 30MHz 5ns 74LS Series 8 D-Type Reset Rising Edge PDIP-20 Flip Flops ROHSonsemiFlip Flops74LS14PC
PDIP-14InvertersTexas Instruments74LVC1G08Z
SOT-553-5-40℃~+125℃ 1 1.65V~5.5V 1.7V、2V 2 2.4V、3.8V 32mA 32mA 4ns@5V,50pF 550mV、800mV 700mV、800mV 74LVC Series AND Gate SOT-553-5 Logic Gates ROHSDiodes IncorporatedLogic GatesNA555D
SOIC-8-40℃~+105℃ 1 200mA 2mA 4.5V~16V Adjustable duty cycle oscillation、Reset function SOIC-8 555 Timers / Counters ROHSTexas InstrumentsTimers / Counters
README
README.mdModular 8-bit Computer
This is the repository for an 8-bit computer system that is built using cards with a standardized interface.
- CPU card
- Protoboard card
- This card contains an onboard clock generator, address and data registers/buffers, and a protoboard area for testing designs.
- Bus interface modeling
Here's an example of a card:

Current Bus Specification
// The main bus wires (32+8=40 wires total)
// On the bus connector, all buses have LSBs closer to the power pins and MSBs farther away
wire VCC_5V;
wire GND;
wire clk; // generated by motherboard clock generator
wire rst_n; // probably a button on the motherboard
wire VCC_3V3;
wire we_n; // active LOW
wire oe_n; // active LOW
wire int_n; // pulled up by motherboard; driven down by any peripheral (could be used for interrupts)
wire [7:0] data;
wire [15:0] addr; // 64k address space is suppored by default. More address bits may be added later
wire [7:0] aux_bus;Parts
246| Qty | Value | Footprint | References |
|---|---|---|---|
| 59 | Conn_01x25_Pin | Connector_PinHeader_2.54mm:PinHeader_1x25_P2.54mm_Vertical | CONNECTIONS1, JCol1, JCol1, JCol1, JCol1, JCol1, JCol1, JCol10, JCol10, JCol11, JCol11, JCol12, JCol12, JCol13, JCol13, JCol14 +43 |
| 47 | 0 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | r10, r11, r12, r13, r14, r15, r16, r17, r18, r19, r20, r21, r56, r57, r58, r59 +31 |
| 40 | 470 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | r0, r1, r2, r3, r22, r23, r24, r25, r26, r27, r28, r29, r30, r31, r32, r33 +24 |
| 23 | Conn_01x01_Pin | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | 3V3, J16, J18, J19, J20, J21, J22, J23, J24, J25, J26, J27, J28, J29, J33, J34 +7 |
| 6 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J6, J7, J8, J9, J10, J11 |
| 6 | Conn_01x08_Pin | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J2, J3, J4, J5, J15, J17 |
| 5 | C | Capacitor_SMD:C_1206_3216Metric | C1, C2, C2, C3, C4 |
| 4 | Conn_01x32_Pin | Connector_PinHeader_2.54mm:PinHeader_1x32_P2.54mm_Vertical | J31, J32, J41, J42 |
| 3 | 1 | Resistor_SMD:R_1206_3216Metric | 5V_rsns1, 5V_rsns2, 5V_rsns3 |
| 3 | 74LS273 | Package_DIP:DIP-20_W7.62mm_Socket | U2, U6, U7 |
| 3 | Conn_01x03_Pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J12, J13, J14 |
| 1 | 28C256 | Package_DIP:DIP-28_W15.24mm | U4 |
| 1 | 3V3_RAW | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D5 |
| 1 | 5V | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D2 |
| 1 | 5V_RAW | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1 |
| 1 | 74LS14 | Package_DIP:DIP-14_W7.62mm_Socket | U5 |
| 1 | 74LS245 | Package_DIP:DIP-20_W7.62mm_Socket | U1 |
| 1 | 74LVC1G08 | Package_TO_SOT_SMD:SOT-23-6_Handsoldering | U3 |
| 1 | A0 | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D6 |
| 1 | A1 | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D7 |
| 1 | A10 | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D16 |
| 1 | A11 | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D17 |
| 1 | A12 | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D18 |
| 1 | A13 | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D19 |
| 1 | A14 | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D20 |
| 1 | A15 | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D21 |
| 1 | A2 | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D8 |
| 1 | A3 | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D9 |
| 1 | A4 | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D10 |
| 1 | A5 | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D11 |
| 1 | A6 | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D12 |
| 1 | A7 | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D13 |
| 1 | A8 | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D14 |
| 1 | A9 | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D15 |
| 1 | CLK | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D3 |
| 1 | Conn_01x40_Pin | Connector_PinHeader_2.54mm:PinHeader_1x40_P2.54mm_Horizontal | J1 |
| 1 | D0 | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D22 |
| 1 | D1 | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D23 |
| 1 | D2 | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D24 |
| 1 | D3 | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D25 |
| 1 | D4 | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D26 |
| 1 | D5 | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D27 |
| 1 | D6 | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D28 |
| 1 | D7 | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D29 |
| 1 | Do0 | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D30 |
| 1 | Do1 | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D31 |
| 1 | Do2 | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D32 |
| 1 | Do3 | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D33 |
| 1 | Do4 | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D34 |
| 1 | Do5 | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D35 |
| 1 | Do6 | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D36 |
| 1 | Do7 | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D37 |
| 1 | Ext0 | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D39 |
| 1 | Ext1 | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D38 |
| 1 | Ext2 | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D40 |
| 1 | LOGO | AudioJacks:isabelgraphic | G*** |
| 1 | NA555D | Package_DIP:DIP-8_W7.62mm_Socket | U8 |
| 1 | RESET | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D4 |
More from ethanjamesauto/modular_8bit_computer
12- 2 layers229.9 × 93.3 mm

- 2 layers229.9 × 83.8 mm

- 2 layers229.9 × 93.3 mm

- 2 layers222.3 × 127 mm

- 2 layers86.4 × 53.8 mm

- 2 layers229.9 × 86.4 mm

- 2 layers2.8 × 6.6 mm

- 2 layers111.8 × 77.2 mm

- 2 layers48.3 × 48.3 mm

- 2 layers119.4 × 45.7 mm

- 2 layers104.1 × 50.8 mm

- 2 layers132.1 × 83.8 mm

Similar boards
- 2 layers279.4 × 203.2 mm

Z180GDC
lynchaj/rhyophyre
Single Board Computer featuring Zilog Z180 processor and NEC µPD7220 Graphics Display Controller
249 parts12 - 2 layers129.5 × 100 mm

Ql Cumana
alvaroalea/QL_Cumana_FLoppyController
A clone of the Cumana's Disk Interface for the Sinclair QL
40 partsCERN-OHL-S-2.0 - 2 layers213.5 × 79.1 mm

- 4 layers295 × 285 mm
/GX700-PWB/Ksys573.kicad_pcb.jpg?size=s&soon)
Ksys573
NaokiS28/Konami-System-573-Documentation
Schematics and pinout information for the Konami System 573
126 parts16 - 2 layers235 × 160 mm

Input output.Disk
lynchaj/duodyne
Duodyne is a hobbyist retrocomputer system designed to run ROMWBW. It is comprised of modules on a system bus
136 parts15 - 2 layers106.3 × 85.1 mm

Pman if
pozsarzs/zacchaeus
8-bit microcomputer built from commercially available and home-built components
39 partsEUPL-1.2 - 2 layers218 × 125 mm

EVA1
roberto314/EVA-1_Reproduction
Recreation of the very rare K-K Systems EVA-1 Display Adapter for the Epson HX-20 Computer
126 parts - 2 layers165.6 × 94 mm

ECK-88
BryanOrabutt/ECK-88
This project is an attempt to recreate the Intel ECK-88 development kit using KiCAD software to recreate the board and schematics.
181 partsMIT
Questions
How big is the Smaller card PCB?
It measures 229.9 × 83.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Smaller card use?
246 parts, built around the A13, 74LS245SC, 74LS273PC and 74LS14PC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Smaller card KiCad files?
From the ethanjamesauto/modular_8bit_computer repository on GitHub, at the commit this page was made from: the board is smaller_card_for_74_series/smaller_card/smaller_card.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Smaller card design in my own project?
Its repository states no licence, so its author keeps all rights: ask ethanjamesauto before reusing the design.