

Usb2most
USB to MOST adapter
- Size
- 94 × 94 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 124
- Nets
- 162
- Pads
- 503
- Tracks, vias
- 1,546, 392
- Pours
- 16
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 29 Aug 2019
- Updated
- 22 Apr 2025
Overview
Usb2most is an open-source printed circuit board by smartgauges, from the smartgauges/usb2most repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 94 × 94 mm with 124 parts on 162 nets, routed with 1,546 tracks and 392 vias.
It is built around the TJA1051T/3/1, TJA1021T/10/C and LMR14206XMK, with the CPC1002N, KF33BD-TR and KP-3216EC among its other parts. Its parts include 57 capacitors, 33 resistors, 13 ICs, 9 diodes and 5 connectors. It belongs with the interfaces and adapters boards and the STM32 boards of this library.
Main components
11TJA1051T/3/1
-- CAN Transceivers ROHSNXP SemiconductorsCAN TransceiversTJA1021T/10/C
SO-81 1 10uA 175mV 4mA 5.5V~27V Transceiver ±6kV SO-8 LIN Transceivers ROHSNXP SemiconductorsLIN TransceiversLMR14206XMK
TSOT-23-6-40℃~+125℃@(TJ) 1 1.25MHz 1.35mA 4.5V~42V 600mA 765mV~34V Adjustable Buck Buck Built-in No TSOT-23-6 DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersCPC1002N
SOP-4-2.54mm-40℃~+85℃ 1.2V 1.3ms 1.5kV 400mW 410us 550mΩ 60V 700mA DC One set normally open: 2A (SPST - normally open) SOP-4-2.54mm Solid State Relays (MOS Output) ROHSLittelfuse/IXYSSolid State Relays (MOS Output)KF33BD-TR
SO-8-40℃~+125℃@(Tj) 1 1A 20V 3.3V 400mV@(500mA) 500uA 50uV 80dB@(120Hz) Enable Fixed Positive SO-8 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSSTMicroelectronicsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsKP-3216EC
1206-40℃~+85℃ 15mcd 160° 2.5V 20mA 617nm 627nm 75mW Discrete Diode Red Water Clear 1206 LED Indication - Discrete ROHSKingbrightLED Indication - DiscreteP6SMB6.8A
DO-214AA(SMB)-55℃~+150℃ 10.5V 1mA 5.8V 57.1A 6.45V 600W@10/1000us TVS Unidirectional DO-214AA(SMB) ESD and Surge Protection (TVS/ESD) ROHSFTRESD And Surge Protection (TVS/ESD)VLP8040T-330M
-±20% - Power Inductors ROHSTDKPower InductorsESDA6V1BC6
SOT-23-6L-40℃~+125℃@(Ta) 1uA 20pF 4 5V 6.1V 6.1V 80W Bidirectional ESD IEC 61000-4-2 SOT-23-6L ESD and Surge Protection (TVS/ESD) ROHSSTMicroelectronicsESD And Surge Protection (TVS/ESD)P6SMB30A
DO-214AA(SMB)-55℃~+150℃ 14.5A@10/1000us 25.6V 31.5V 41.4V 5uA 600W@10/1000us IEC 61000-4-2 TVS Unidirectional DO-214AA(SMB) ESD and Surge Protection (TVS/ESD) ROHShongjiachengESD And Surge Protection (TVS/ESD)PMEG6010CEJ
SOD-323Schottky DiodesDOWO
README
README.mdusb2most
USB to MOST adapter to translate audio from a USB(UAC1) to MOST(Media Oriented Systems Transport) bus
Interfaces:
- 8 audio channels(16bit/48kHz) over MOST bus
- 2 audio channels(16bit/48kHz) over USB
- 4 CAN for HS/HS" and MS/MS"
- 1 LIN for analogue watch
- 1 UART for CANBUS emulation

Parts
124| Qty | Value | Footprint | References |
|---|---|---|---|
| 31 | 100n | Capacitor_SMD:C_0805_2012Metric | C10, C13, C16, C21, C22, C24, C25, C26, C27, C28, C29, C30, C31, C33, C35, C36 +15 |
| 12 | 33k | Resistor_SMD:R_0805_2012Metric | R1, R2, R3, R4, R9, R10, R25, R29, R30, R31, R36, R37 |
| 11 | 10u | Capacitor_SMD:C_1206_3216Metric | C8, C17, C20, C23, C34, C40, C41, C49, C54, C58, C61 |
| 8 | 1k | Resistor_SMD:R_0805_2012Metric | R5, R6, R12, R14, R15, R16, R32, R35 |
| 6 | 60R | Resistor_SMD:R_0805_2012Metric | R20, R21, R22, R23, R27, R28 |
| 4 | 22p | Capacitor_SMD:C_0805_2012Metric | C4, C5, C18, C19 |
| 3 | 2.2k | Resistor_SMD:R_0805_2012Metric | R24, R33, R34 |
| 3 | CPC1002N | Package_SO:SOP-4_3.8x4.1mm_P2.54mm | U11, U12, U13 |
| 3 | KP-3216 | Resistor_SMD:R_1206_3216Metric | D2, D6, D9 |
| 3 | TJA1051T-3 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2, U3, U4 |
| 2 | 10p | Capacitor_SMD:C_0805_2012Metric | C1, C2 |
| 2 | 10u | Capacitor_SMD:C_1812_4532Metric | C11, C12 |
| 2 | 150 | Resistor_SMD:R_0805_2012Metric | R7, R8 |
| 2 | 1u | Capacitor_SMD:C_1206_3216Metric | C15, C32 |
| 2 | 2.2u | Capacitor_SMD:C_1206_3216Metric | C7, C37 |
| 2 | 8MHZ | Crystal:Crystal_HC49-U_Vertical | Y1, Y2 |
| 2 | KF33BD-TR | Package_SO:SO-8_3.9x4.9mm_P1.27mm | U6, U10 |
| 2 | P6SMB6.8A | Diode_SMD:D_SMB | D7, D8 |
| 2 | SW_Push | Button_Switch_SMD:SW_SPST_EVQPE1 | SW1, SW2 |
| 2 | VLP8040T-330M | Inductor_SMD:L_TDK_VLP8040 | L1, L2 |
| 1 | 1-1394640-1 | usb2most:TYCO_1_1394640_1 | J5 |
| 1 | 100n | Capacitor_SMD:C_1206_3216Metric | C3 |
| 1 | 18.432M | Crystal:Crystal_HC49-U_Vertical | Y3 |
| 1 | 1n | Capacitor_SMD:C_0805_2012Metric | C56 |
| 1 | 220n | Capacitor_SMD:C_0805_2012Metric | C14 |
| 1 | 3.32k | Resistor_SMD:R_0805_2012Metric | R38 |
| 1 | 5,49k | Resistor_SMD:R_0805_2012Metric | R11 |
| 1 | Conn_01x03_Male | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J7 |
| 1 | Conn_01x20_Female | Connector_PinHeader_2.00mm:PinHeader_2x10_P2.00mm_Vertical | J1 |
| 1 | ESDA6V1BC6 | Package_TO_SOT_SMD:SOT-23-6 | D4 |
| 1 | LMR14206 | Package_TO_SOT_SMD:SOT-23-6_Handsoldering | U7 |
| 1 | MCP2515-xST | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U8 |
| 1 | P6SMB30A | Diode_SMD:D_SMB | D1 |
| 1 | PMEG6010CEJ | Resistor_SMD:R_0805_2012Metric | D5 |
| 1 | PMEG6010CEJ | Diode_SMD:D_SOD-323 | D3 |
| 1 | STM32F446VCTx | Package_QFP:LQFP-100_14x14mm_P0.5mm | U1 |
| 1 | TJA1021T | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U5 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Molex-105017-0001 | J6 |
| 1 | os8104a | Package_QFP:LQFP-44_10x10mm_P0.8mm | U9 |
| 1 | totx147 | usb2most:TOTX147 | J2 |
More from smartgauges/usb2most
3Similar boards
- 4 layers202 × 125 mm

- 6 layers95.9 × 90.2 mm

Cpb
OakwoodEngineering/ObiWanKomputer
The Obi Wan Komputer and Combined Payload Boards from the NyanSat project.
251 parts10 - 2 layers266 × 76 mm

- 2 layers55 × 70 mm

- 2 layers87.1 × 58.5 mm

Panel
ConfusedHello/STorM32-NT
A fork of the STorM32 NT controller board for my own purposes.
217 parts - 6 layers160 × 120 mm

Pic32main
JuanPoueriet/automatic-spork
Máquina de ruleta física de casino. 6 PCBs: pic32main (cerebro), wheel (rueda de LEDs), displaysa/b/c (paneles de 7 segmentos en cascada) y buttons (botonera).
256 parts - 2 layers100 × 70 mm

Na wink
rodriveiga01/mx5-light
Sources: na-wink.kicadsch (schematic) and na-wink.kicadpcb (layout draft). This is a review draft, not fabrication-ready.
51 partsGPL-3.0 - 2 layers103 × 86.5 mm

Input-16--module
sillevl/spha-btni-hardware
SPHA 16-channel input module with microcontroller, input/output circuitry, and CAN connectivity.
112 parts
Questions
How big is the Usb2most PCB?
It measures 94 × 94 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Usb2most use?
124 parts, built around the TJA1051T/3/1, TJA1021T/10/C, LMR14206XMK and CPC1002N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Usb2most KiCad files?
From the smartgauges/usb2most repository on GitHub, at the commit this page was made from: the board is hardware-v2/usb2most.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Usb2most design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).

