

Sumo hardware
3Kg Sumo Hardware
- Size
- 55 × 70 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 96
- Nets
- 80
- Pads
- 370
- Tracks, vias
- 573, 79
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 16 Oct 2026
- Updated
- 30 Oct 2026
Overview
Sumo hardware is an open-source printed circuit board by equipe-paralela, from the equipe-paralela/sumo-hardware repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 55 × 70 mm with 96 parts on 80 nets, routed with 573 tracks and 79 vias.
It is built around the ESP32-S3-WROOM-1-N8, CD74HC4067M and KF33BD-TR, with the WS2812B-4020-G1 and LESD5D5.0CT1G among its other parts. Its parts include 27 resistors, 17 switches, 13 diodes, 12 capacitors and 8 connectors. It belongs with the ESP32 boards of this library.
Main components
5ESP32-S3-WROOM-1-N8
SMD,25.5x18mm-40℃~+85℃ -98.2dBm 2.4GHz 20.5dBm 355mA 3V~3.6V 95mA Bluetooth5.0 ESP32-S3 Chip On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi ModulesCD74HC4067M
SOIC-24-300mil-55℃~+125℃ 16 160Ω 16:1 22ns 2V~6V 345ns 365ns 89MHz Bidirectional analog channel、Glitch-free switching SOIC-24-300mil Analog Switches, Multiplexers ROHSTexas InstrumentsAnalog Switches, MultiplexersKF33BD-TR
SO-8-40℃~+125℃@(Tj) 1 1A 20V 3.3V 400mV@(500mA) 500uA 50uV 80dB@(120Hz) Enable Fixed Positive SO-8 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSSTMicroelectronicsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsWS2812B-4020-G1
SMD-4P,4x2mmSMD-4P,4x2mm RGB LEDs(Built-in IC) ROHSWorldsemiUncategorisedLESD5D5.0CT1G
SOD-523-55℃~+150℃ 100W 12pF 16V 1uA 5V 7A 7V Bidirectional ESD IEC 61000-4-2 SOD-523 ESD and Surge Protection (TVS/ESD) ROHSGOODWORKUncategorised
README
README.mdsumo-hardware
Parts
96| Qty | Value | Footprint | References |
|---|---|---|---|
| 17 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R5, R7, R11, R13, R15, R16, R17, R18, R19, R21, R22, R23, R25, R26, R27 +1 |
| 16 | Conn_01x03 | dolphin:Connector_JST_ZH_B3B-ZR_1x03_P1.50mm_Vertical | S01, S02, S03, S04, S05, S06, S07, S08, S09, S10, S11, S12, S13, S14, S15, S16 |
| 10 | 20k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R3, R4, R6, R8, R10, R12, R14, R20, R24 |
| 8 | 1u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C3, C6, C7, C8, C9, C10 |
| 8 | WS2812B-4020-G1 | dolphin:LED_WS2812B-4020 | D6, D7, D8, D9, D10, D11, D12, D13 |
| 4 | 10u 16V | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C4, C5, C11, C12 |
| 4 | M3 | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H1, H2, H3, H4 |
| 3 | BLUE_2V6 | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1, D2, D3 |
| 2 | Jumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP1, JP3 |
| 2 | LESD5D5.0CT1G | Diode_SMD:D_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D4, D5 |
| 1 | +BATT | TestPoint:TestPoint_Pad_D1.0mm | TP2 |
| 1 | 3V3 | TestPoint:TestPoint_Pad_D1.0mm | TP4 |
| 1 | 5V | TestPoint:TestPoint_Pad_D1.0mm | TP3 |
| 1 | CD74HC4067M | Package_SO:SOIC-24W_7.5x15.4mm_P1.27mm | U3 |
| 1 | Conn_02x08_Odd_Even | Connector_PinSocket_2.54mm:PinSocket_2x08_P2.54mm_Vertical | J4 |
| 1 | ENC_L | dolphin:Connector_JST_ZH_B3B-ZR_1x03_P1.50mm_Vertical | J9 |
| 1 | ENC_R | dolphin:Connector_JST_ZH_B3B-ZR_1x03_P1.50mm_Vertical | J8 |
| 1 | ESC_L | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J3 |
| 1 | ESC_R | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J7 |
| 1 | ESP32-S3-WROOM-1 | dolphin:ESP32-S3-WROOM-1 | U4 |
| 1 | FS-iA6 | dolphin:Receiver_FS-iA6 | RC1 |
| 1 | KF33BDT | dolphin:Regulator_KF33BD-TR | U2 |
| 1 | LOGO | dolphin:LOGO_Paralela_10MM | G*** |
| 1 | LOGO | dolphin:LOGO_Gengar_10MM | G*** |
| 1 | LRGB | dolphin:Connector_JST_ZH_B4B-ZR_1x04_P1.50mm_Vertical | J2 |
| 1 | MICRO_START | dolphin:Connector_JST_ZH_B3B-ZR_1x03_P1.50mm_Vertical | J1 |
| 1 | SW_Push | Button_Switch_SMD:SW_SPST_PTS810 | SW1 |
| 1 | USB_C | dolphin:Connector_USB-C | P1 |
| 1 | ~ | dolphin:Regulator_DC-DC_MINI-360 | U1 |
The 93 most common of 96 parts.
More from equipe-paralela/sumo-hardware
2- 2 layers20 × 25 mm

- 2 layers7.5 × 14 mm

Similar boards
- 4 layers202 × 125 mm

- 2 layers100 × 100 mm

- 6 layers95.9 × 90.2 mm

Cpb
OakwoodEngineering/ObiWanKomputer
The Obi Wan Komputer and Combined Payload Boards from the NyanSat project.
251 parts10 - 2 layers100 × 70 mm

Na wink
rodriveiga01/mx5-light
Sources: na-wink.kicadsch (schematic) and na-wink.kicadpcb (layout draft). This is a review draft, not fabrication-ready.
51 partsGPL-3.0 - 2 layers164.3 × 145 mm

Main board esp32
MrRooby/Maszyna-W-ESP32
ESP32 based project with addressable LED displays, simulating basic CPU architecture with website Websocket connectivity for real time visualization
92 parts2 - 2 layers517.1 × 517.1 mm

Chessinator9000kicad pcb
Danneshowrang/Chessinator-9000
A smart open source modular chessboard system.
93 partsMIT - 2 layers350.5 × 344.8 mm

8x8
noahrichards213/LED-guided-chessboard
Chessboard for beginners that lights up the available moves for the player
384 parts - 4 layers100 × 74 mm

Mission board
tmb5932/fixed-wing-drone
The basics needed to allow a RC plane to be turned autonomous on signal.
128 parts
Questions
How big is the Sumo hardware PCB?
It measures 55 × 70 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Sumo hardware use?
96 parts, built around the ESP32-S3-WROOM-1-N8, CD74HC4067M, KF33BD-TR and WS2812B-4020-G1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Sumo hardware KiCad files?
From the equipe-paralela/sumo-hardware repository on GitHub, at the commit this page was made from: the board is kicad/projects/mainboard/mainboard.kicad_pcb and its schematic kicad/projects/encoder/encoder.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Sumo hardware design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).