2 layers100 × 100 mm
2 layers40 × 70 mm
Adapter
smartgauges/usb2most26USB to MOST adapter
- Size
- 40 × 70 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 13
- Nets
- 19
- Pads
- 63
- Tracks, vias
- 90, 0
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 29 Aug 2019
- Updated
- 22 Apr 2025
Overview
Adapter is an open-source printed circuit board by smartgauges, from the smartgauges/usb2most repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 40 × 70 mm with 13 parts on 19 nets, routed with 90 tracks and 0 vias.
Its parts include 10 connectors and 3 resistors. It belongs with the interfaces and adapters boards of this library.
README
README.mdusb2most
USB to MOST adapter to translate audio from a USB(UAC1) to MOST(Media Oriented Systems Transport) bus
Interfaces:
- 8 audio channels(16bit/48kHz) over MOST bus
- 2 audio channels(16bit/48kHz) over USB
- 4 CAN for HS/HS" and MS/MS"
- 1 LIN for analogue watch
- 1 UART for CANBUS emulation
Parts
13| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 0 | Resistor_SMD:R_0805_2012Metric | R1, R2, R3 |
| 2 | Conn_01x02_Male | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J8, J10 |
| 2 | Conn_01x03_Male | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J6, J7 |
| 2 | Conn_01x04_Male | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J4, J9 |
| 2 | Conn_01x10_Male | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical | J2, J5 |
| 1 | Conn_01x07_Male | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J3 |
| 1 | Conn_01x10_Male | adapter:IL-AG5-10P-S3L2 | J1 |
Questions
How big is the Adapter PCB?
It measures 40 × 70 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Adapter use?
13 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Adapter KiCad files?
From the smartgauges/usb2most repository on GitHub, at the commit this page was made from: the board is adapter-lr2/adapter.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Adapter design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from smartgauges/usb2most
3- 2 layers100 × 100 mm
- 2 layers94 × 94 mm
Similar boards
- 2 layers40 × 20 mm
- 2 layers74.9 × 49.5 mm
- 2 layers35 × 29 mm
MagSpoofTC
samyk/magspoof
A portable device that can spoof/emulate any magnetic stripe, credit card or hotel card "wirelessly", even on standard magstripe (non-NFC/RFID) readers.
13 parts4.2k - 2 layers20.6 × 23.6 mm
AO-03 signal amplifier
fossasia/pslab-scripts
Pocket Science Lab - Scripts for Sensor Experiments
13 parts1.6kApache-2.0 - 2 layers47 × 35.6 mm
- 2 layers95 × 95 mm
Cube batteryboard
willem-pennings/balancing-cube
A cube that balances itself in a corner or edge using reaction wheels
13 parts1.1kGPL-3.0 - 2 layers15.2 × 20.3 mm
Pt100stick
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
13 parts1.1kGPL-3.0 - 2 layers53.9 × 23.2 mm
Buffer
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
13 parts1kGPL-3.0