
Main pcb
peterkrull/quad
Firmware, hardware and documentation for my autonomous quad copter project

LED + GYRO + BATTERY
GyroLed2 is an open-source printed circuit board by smariel, from the smariel/GyroLed2 repository on GitHub, published under the CERN-OHL-W-2.0 licence. It is a 2-layer board of 24.5 × 29.4 mm with 22 parts on 37 nets, routed with 183 tracks and 16 vias.
It is built around the LSM6DS3. Its parts include 10 capacitors, 5 resistors, 3 ICs, 1 diode and 1 connector. It belongs with the STM32 boards of this library.

| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 100n | Capacitor_SMD:C_0402_1005Metric | C1, C2, C7, C8, C9, C10 |
| 3 | 1u | Capacitor_SMD:C_0402_1005Metric | C3, C5, C6 |
| 2 | 0 | Resistor_SMD:R_0603_1608Metric | R4, R5 |
| 2 | 10k | Resistor_SMD:R_0402_1005Metric | R1, R2 |
| 1 | 10u | Capacitor_SMD:C_0603_1608Metric | C4 |
| 1 | 72k | Resistor_SMD:R_0402_1005Metric | R3 |
| 1 | Battery_Cell | Battery:BatteryHolder_Keystone_3009_1x2450 | BT1 |
| 1 | Conn_02x04_Odd_Even | Connector_PinHeader_1.27mm:PinHeader_2x04_P1.27mm_Vertical_SMD | J2 |
| 1 | LED_RGB | LED_SMD:LED_ROHM_SMLVN6 | D1 |
| 1 | LSM6DS3 | Package_LGA:LGA-14_3x2.5mm_P0.5mm_LayoutBorder3x4y | U1 |
| 1 | NCP5623DTBR2G | Package_SO:TSSOP-14_4.4x5mm_P0.65mm | U3 |
| 1 | STM32L031G6Ux | Package_DFN_QFN:QFN-28_4x4mm_P0.5mm | U2 |
| 1 | SW_Push | Button_Switch_SMD:SW_Push_1P1T_NO_CK_KSC7xxJ | SW1 |

peterkrull/quad
Firmware, hardware and documentation for my autonomous quad copter project

neuroidss/FreeEEG32-beta
as FreeEEG32 plus alpha1.5 test passed, FreeEEG32 project changed to beta version

aeonSolutions/AeonLabs-AI-Volvo-MKII-Open-Hardware
Volvo MKII Open Hardware




neuroidss/FreeEEG32-alpha1.0
ALPHA1.0 TEST FAILED, USE NEW VERSION INSTEAD FreeEEG32 alpha1.0 32 channels mobile electroencephalography under GNU AGPL 24 bits, 4kSPS ADCs 4x AD7770 MCU STM32F427ZI WIFI ESP-12F (ESP8266) USB CP2102N Accel & hyro…

neuroidss/FreeEEG32-alpha1.5
4xAD7771BCPZ 64 kSPS, ADR4525BRZ 2.5V REF +-0.02%, STM32H743ZIT6 MCU 1027 DMIPS
It measures 24.5 × 29.4 mm and has 2 copper layers, 1.6 mm thick.
22 parts, built around the LSM6DS3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the smariel/GyroLed2 repository on GitHub, at the commit this page was made from: the board is gyroled2/gyroled2.kicad_pcb and its schematic gyroled2/gyroled2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CERN-OHL-W-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).