

Trap mini v2
- Size
- 54 × 30 mm
- Copper layers
- 4
- Thickness
- 1.61 mm
- Parts
- 145
- Nets
- 98
- Pads
- 488
- Tracks, vias
- 1,617, 222
- Pours
- 14
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 4 Mar 2026
- Updated
- 4 Mar 2026
Overview
Trap mini v2 is an open-source printed circuit board by smaohua, from the smaohua/scoutlabs repository on GitHub. It is a 4-layer board of 54 × 30 mm with 145 parts on 98 nets, routed with 1,617 tracks and 222 vias.
It is built around the ESP32-S3R8, W25Q128JVPIQ and ME6211C33R5G, with the DS8561-18S3, LR6206B-U28 and PCF8563T/5 among its other parts. Its parts include 46 capacitors, 38 resistors, 11 diodes, 9 ICs and 8 connectors. It belongs with the ESP32 boards of this library.
Main components
12ESP32-S3R8
QFN-56(7x7)-40℃~+65℃ -74.2dBm 150Mbps 18.5dBm 2.412GHz~2.484GHz 2.4GHz 283mA 3V~3.6V 88mA Bluetooth、WiFi DMA function SPI、USB、UART、I2C、I2S transceiver QFN-56(7x7) RF Transceiver ICs ROHSEspressif SystemsRF Transceiver ICsW25Q128JVPIQ
WSON-8-EP(5x6)-40℃~+85℃ 100,000 cycles 10uA 120ms@(32KB) 128Mbit 133MHz 2.7V~3.6V 20 Years Power-on reset、Hardware write protection、Software write protection、Write enable latch、Absolute write protection、Power lock protection SPI WSON-8-EP(5x6) NOR FLASH ROHSWinbond ElecNOR FLASHME6211C33R5G
SOT-353-40℃~+150℃ 1 120mV@(100mA) 3.3V 30uA 500mA 50uVrms 6V 70dB@(1kHz) Enable、Short Circuit Protection Fixed Positive SOT-353 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMICRONEVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsDS8561-18S3
SOT23-3-40℃~+125℃@(Tj) 1 1.8V 280mV@(300mA) 2uA 300mA 5.5V 75dB@(1kHz) Fixed Over Current Protection、Over Temperature Protection、Enable Positive SOT23-3 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSDSTECHVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsLR6206B-U28
SOT23B-10℃~+85℃@(Ta) 1 2.8V 300mA 320mV@(150mA) 40dB@(10kHz) 6.5V 8uA Fixed Positive Short Circuit Protection SOT23B Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSLRVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsPCF8563T/5
SO-8-40℃~+85℃ 0.25uA 1V~5.5V Battery low-voltage detection、Programmable clock output、Alarm function、Countdown timer I2C Yes SO-8 Real Time Clocks ROHSNXP SemiconductorsReal Time ClocksTPS63020
UncategorisedTexas InstrumentsPESDNC2FD5VB-MS
DFN1006-2-55℃~+125℃ 1 10V 15pF 1uA 5A 5V 8.4V 80W Bidirectional ESD IEC 61000-4-2、IEC 61000-4-4 DFN1006-2 ESD and Surge Protection (TVS/ESD) ROHSMSKSEMIESD And Surge Protection (TVS/ESD)SI2302-HXY
SOT-23-55℃~+150℃ 1 N-channel 1.2V 2.8A 20V 260pF 27pF 55mΩ@4.5V 5nC@4.5V 900mW SOT-23 MOSFETs ROHSHXY MOSFETMOSFETs2N7002DW
SOT-363-50℃~+150℃ 1.9Ω@10V 12pF 2 N-Channel 2.5V 300mA 300mW 60V 650pC@30V SOT-363 MOSFETs ROHSGuangdong HottechMOSFETsHSW6604
SOT-23-6L-55℃~+150℃ 1 N-Channel + 1 P-Channel 1.1W 1.2V 20V 4A 52pF 561pF 6.1nC@4.5V 61pF 80mΩ@4.5V N-Channel + P-Channel SOT-23-6L MOSFETs ROHSHUASHUOMOSFETsPRO-OB-607
SMD,9.9x4.3mm-0.6dBi -40℃~+125℃ 100MHz 2.45GHz 2mm 4.3mm 50Ω 9.9mm Patch Antenna SMD,9.9x4.3mm Antennas ROHSAbraconAntennas
Parts
145| Qty | Value | Footprint | References |
|---|---|---|---|
| 24 | 100nF | Capacitor_SMD:C_0402_1005Metric | C1, C4, C10, C13, C15, C16, C18, C19, C22, C23, C25, C28, C32, C33, C34, C35 +8 |
| 24 | 10k | Resistor_SMD:R_0402_1005Metric | R1, R10, R12, R13, R14, R17, R18, R22, R23, R24, R25, R26, R31, R33, R34, R35 +8 |
| 13 | 10uF | Capacitor_SMD:C_0603_1608Metric | C11, C12, C14, C17, C24, C26, C27, C29, C30, C31, C44, C46, C47 |
| 10 | TestPoint_Alt | trap_mini_v2:TestPoint_D0.8mm | TP1, TP2, TP6, TP8, TP9, TP10, TP11, TP12, TP16, TP19 |
| 7 | 100R | Resistor_SMD:R_0603_1608Metric | R27, R28, R29, R30, R37, R38, R39 |
| 5 | 10 pF | Capacitor_SMD:C_0402_1005Metric | C9, C36, C37, C41, C42 |
| 5 | 1M | Resistor_SMD:R_0402_1005Metric | R15, R16, R19, R20, R21 |
| 5 | PESDNC2FD5VB-MS | Diode_SMD:D_SOD-882 | D2, D8, D9, D10, D11 |
| 4 | , , , | ||
| 3 | Fiducial | Fiducial:Fiducial_1mm_Mask3mm | FID1, FID2, FID3 |
| 3 | ME6211C33 | Package_TO_SOT_SMD:SOT-23-5 | U1, U8, U11 |
| 2 | 2P ZZ | trap_mini_v2:smapp_JST_SHL_SM02B-SHLS-TF_1x02-1MP_P1.00mm_Horizontal | J1, J4 |
| 2 | 3.3pF | Capacitor_SMD:C_0402_1005Metric | C6, C8 |
| 2 | 330uF | Capacitor_SMD:CP_Elec_6.3x5.7 | C20, C21 |
| 2 | Conn_01x08_Socket | trap_mini_v2:PinHeader_1x08_P2.54mm_Vertical_SMD_Pin1Left | J9, J10 |
| 2 | SD103 | Diode_SMD:D_SOD-123 | D4, D5 |
| 2 | SI2302-HXY | Package_TO_SOT_SMD:SOT-23-3 | Q2, Q5 |
| 2 | WHITE | LED_SMD:LED_PLCC_2835 | D6, D7 |
| 1 | 100R | Resistor_SMD:R_0402_1005Metric | R9 |
| 1 | 1uH | Inductor_SMD:L_TracoPower_TCK-047_5.2x5.8mm | L2 |
| 1 | 2.8 nH | Inductor_SMD:L_0402_1005Metric | L1 |
| 1 | 2N7002DW | Package_TO_SOT_SMD:SOT-363_SC-70-6 | Q1 |
| 1 | 32.768k | Crystal:Crystal_SMD_3215-2Pin_3.2x1.5mm | Y3 |
| 1 | 3V 927 | trap_mini_v2:BatteryHolder_Keystone_2998_1x6.8mm | BT2 |
| 1 | 40 MHz | Crystal:Crystal_SMD_2016-4Pin_2.0x1.6mm | Y2 |
| 1 | 4P ZZ | trap_mini_v2:smapp_JST_SHL_SM05B-SHLS-TF_1x05-1MP_P1.00mm_Horizontal | J7 |
| 1 | 63.4 k | Resistor_SMD:R_0402_1005Metric | R11 |
| 1 | AO4884-MS / SH8K26 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | Q3 |
| 1 | Conn_01x24_Socket | Connector_FFC-FPC:Hirose_FH12-24S-0.5SH_1x24-1MP_P0.50mm_Horizontal | J3 |
| 1 | Conn_ARM_SWD_TagConnect_TC2030-NL | Connector:Tag-Connect_TC2030-IDC-NL_2x03_P1.27mm_Vertical | J11 |
| 1 | DS8561-18S3 | Package_TO_SOT_SMD:SOT-23 | U2 |
| 1 | ESP32-S3R8 | Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP5.6x5.6mm | U5 |
| 1 | HL51850HP25 | LED_THT:LED_D5.0mm_Clear | Q6 |
| 1 | HSW6604 | Package_TO_SOT_SMD:TSOT-23-6 | Q4 |
| 1 | LED_BGKR | trap_mini_v2:LED_RGB_Everlight_EASV3015RGBA0_Horizontal | D3 |
| 1 | LR6206B-U28 | Package_TO_SOT_SMD:SOT-23 | U3 |
| 1 | PCF8563T | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U10 |
| 1 | PRO-OB-607 | ESP_Antenna:ESPRESSIF_ESP32_MIFA_2.4GHz_Right | Y1 |
| 1 | RED | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | SHOU HAN TYPE-C 16P QTWT | trap_mini_v2:SHOU HAN TYPE-C 16P QTWT | J2 |
| 1 | SW_Push_SPDT | Button_Switch_THT:SW_Push_2P2T_Toggle_CK_PVA2xxH1xxxxxxV2 | SW1 |
| 1 | TACT | trap_mini_v2:SW_SPST_B3U-1000P | SW3 |
| 1 | TPS63020 | smapp_footprints:QFN14_1 | U4 |
| 1 | W25Q128JVPIQ | trap_mini_v2:WSON-8-1EP_6x5mm_P1.27mm_EP3.4x4mm | U6 |
| 1 | camera_glue_here | smapp_footprints:camera_glue_here |
The 144 most common of 145 parts.
More from smaohua/scoutlabs
3- 4 layers39.6 × 29.6 mm

- 4 layers43 × 27 mm

- 4 layers43 × 27 mm

Similar boards
- 4 layers26 × 46 mm

- 8 layers60 × 70 mm

ESP32-S3 Small Camera
maxd-out83/ESP32-S3-Small-Camera-PCB-v2.4
Engineering PCB Design Project
91 parts - 4 layers32.2 × 34.1 mm

- 2 layers98.9 × 91.4 mm

Coin Cell Tester
tomrodinger/servomotor
Open-source NEMA-17 integrated servomotor (motor + closed-loop driver + controller + encoder). RS-485, Python/Arduino libraries, MCP server for AI control. Hardware, firmware and software.
204 parts17MIT - 4 layers42 × 42 mm

Dynossat edu obc
BHDynamics/dynossat-edu-obc
DynOSSAT-EDU, educational PocketQube satellite On-Board Computer files
60 parts14 - 2 layers123.4 × 123.4 mm

Eink mahjong compass
ikuto0815/eink_mahjong_compass
This repo contains all the files neccesary to build a bluetooth controlled digital mahjong compass.
55 parts4AGPL-3.0 - 2 layers40.5 × 56 mm

- 2 layers30 × 100 mm

Moskill
telagod/moskill
MosKill - Smart Mosquito Swatter with BLE, Kill Counting & Statistics | ESP32-C3 + KiCad PCB + UniApp
95 parts2
Questions
How big is the Trap mini v2 PCB?
It measures 54 × 30 mm and has 4 copper layers, 1.61 mm thick.
What parts does the Trap mini v2 use?
145 parts, built around the ESP32-S3R8, W25Q128JVPIQ, ME6211C33R5G and DS8561-18S3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Trap mini v2 KiCad files?
From the smaohua/scoutlabs repository on GitHub, at the commit this page was made from: the board is scoutlabs-trap-miniv2-mainboard-develop/kicad/trap_mini_v2.kicad_pcb and its schematic scoutlabs-mini2-comm-a767x-develop/kicad/com_module_a7672xx_c.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Trap mini v2 design in my own project?
Its repository states no licence, so its author keeps all rights: ask smaohua before reusing the design.