2 layers49 × 37 mm
2 layers56 × 43 mm
Dvh
Sleeeee/dvhDamn Vulnerable Hardware (DVH)
- Size
- 56 × 43 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 69
- Nets
- 68
- Pads
- 232
- Tracks, vias
- 498, 50
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 16 Nov 2025
- Updated
- 22 Jul 2026
Overview
Dvh is an open-source printed circuit board by Sleeeee, from the Sleeeee/dvh repository on GitHub, published under the MIT licence. It is a 2-layer board of 56 × 43 mm with 69 parts on 68 nets, routed with 498 tracks and 50 vias.
It is built around the ATTINY85-20PU, AMS1117-3.3 and AP2112K-3.3, with the M24C02-WMN6 among its other parts. Its parts include 23 resistors, 16 capacitors, 9 connectors, 5 ICs and 3 diodes. It belongs with the STM32 and AVR (ATmega, ATtiny) boards of this library.
Main components
4
ATTINY85-20PU
PDIP-8-40℃~+85℃ 10bit 2.7V~5.5V 20MHz 512Byte 512Byte 6 8 Bit 8KB AVR Built-in FLASH PDIP-8 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
AP2112K-3.3
SOT253.3V 600mA CMOS Low Dropout Linear Regulator with EnableDiodes IncorporatedUncategorised
M24C02-WMN6
SO-8SO-8 EEPROM ROHSSTMicroelectronicsEEPROM
README
README.mddvh
Damn Vulnerable Hardware (DVH)
Parts
69| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 10k | Resistor_SMD:R_0402_1005Metric | R2, R4, R5, R6, R7, R8, R10, R11, R14, R16, R18 |
| 11 | 1k5 | Resistor_SMD:R_0402_1005Metric | R1, R3, R9, R12, R13, R15, R19, R20, R21, R22, R23 |
| 6 | 100n | Capacitor_SMD:C_0402_1005Metric | C6, C7, C8, C9, C13, C16 |
| 4 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H1, H2, H3, H4 |
| 2 | 10p | Capacitor_SMD:C_0402_1005Metric | C3, C4 |
| 2 | 1u | Capacitor_SMD:C_0805_2012Metric | C14, C15 |
| 2 | 1u | Capacitor_SMD:C_0402_1005Metric | C10, C11 |
| 2 | 22u | Capacitor_SMD:C_0805_2012Metric | C1, C2 |
| 2 | 2N7002 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 2 | RED | LED_SMD:LED_0603_1608Metric | D1, D3 |
| 1 | 10n | Capacitor_SMD:C_0402_1005Metric | C12 |
| 1 | 10u | Capacitor_SMD:C_0603_1608Metric | C5 |
| 1 | 120R | Inductor_SMD:L_0603_1608Metric | FB1 |
| 1 | 16MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 47 | Resistor_SMD:R_1206_3216Metric | R17 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | AP2112K-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U5 |
| 1 | ATtiny85-20P | Package_DIP:DIP-8_W7.62mm | U4 |
| 1 | DOOR | TestPoint:TestPoint_THTPad_D2.0mm_Drill1.0mm | TP1 |
| 1 | GLITCH_EN | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J9 |
| 1 | GLITCH_IN | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J8 |
| 1 | GLITCH_TRIG | TestPoint:TestPoint_THTPad_D2.0mm_Drill1.0mm | TP3 |
| 1 | GREEN | LED_SMD:LED_0603_1608Metric | D2 |
| 1 | I2C_INT | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J6 |
| 1 | LAB_RST | Button_Switch_SMD:SW_Push_1TS009xxxx-xxxx-xxxx_6x6x5mm | SW2 |
| 1 | M24C02-WMN | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | RFID_INT | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J7 |
| 1 | SEL_IN | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | SEL_VDD | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | STM32F103C8Tx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | SWD_INT | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J4 |
| 1 | SW_BOOT0 | Button_Switch_SMD:SW_SPDT_CK_JS102011SAQN | SW1 |
| 1 | UART_INT | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J5 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Amphenol_10118194-0001LF_Horizontal | J1 |
| 1 | WP | TestPoint:TestPoint_THTPad_D2.0mm_Drill1.0mm | TP2 |
Questions
How big is the Dvh PCB?
It measures 56 × 43 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Dvh use?
69 parts, built around the ATTINY85-20PU, AMS1117-3.3, AP2112K-3.3 and M24C02-WMN6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Dvh KiCad files?
From the Sleeeee/dvh repository on GitHub, at the commit this page was made from: the board is hardware/v1/kicad/v1.kicad_pcb and its schematic hardware/v0/kicad/dvh.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Dvh design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from Sleeeee/dvh
1Similar boards
- 2 layers26 × 30 mm
- 2 layers60 × 65 mm
- 2 layers40 × 51.5 mm
- 2 layers70.4 × 84 mm
Heterodyne Board
wwaltz2/ECE445-UIUC-Heterodyne
For ease of sharing files, journals, code, and schematics while we design, revise, build, and report on our senior design project.
72 parts - 2 layers44.6 × 16.6 mm
- 4 layers54.4 × 20.3 mm
- 2 layers57 × 18 mm
IoT Environmental Monitor
FarahCelebi/PCB-Design-Projects
A collection of PCB designs progressing from basic passive circuits to a complete USB-powered IoT sensor board — built in KiCad, covering schematic design, multi-layer layouts, power regulation, I2C communication, and…
19 partsMIT - 4 layers80 × 80 mm
