
UniversalSolenoidRelay
slacshan/MIDI-Projects
All MIDI Project for Idaho State University RCET

All MIDI Project for Idaho State University RCET
UMaster is an open-source printed circuit board by slacshan, from the slacshan/MIDI-Projects repository on GitHub. It is a 2-layer board of 86.5 × 86.3 mm with 39 parts on 45 nets, routed with 259 tracks and 3 vias.
It is built around the PIC16F1788-I/SS. Its parts include 10 diodes, 9 connectors, 6 resistors, 3 switches and 1 capacitor. It belongs with the PIC boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | LED_Small_Filled | 2JB_Footprints:D_0805 | D2, D3, D4, D5, D6, D7, D8, D9, D10 |
| 4 | I2C Out | 2JB_Footprints:RJ11 | J4, J5, J6, J7 |
| 2 | 10KΩ | 2JB_Footprints:C_0805 | R1, R2 |
| 2 | 2.2KΩ | 2JB_Footprints:C_0805 | R3, R4 |
| 1 | 10KΩ | 2JB_Footprints:1x9_100mil_Header | R6 |
| 1 | 10µF | Capacitor_THT:C_Radial_D6.3mm_H11.0mm_P2.50mm | C1 |
| 1 | 1KΩ | 2JB_Footprints:1x9_100mil_Header | R5 |
| 1 | 1N4148 | 2JB_Footprints:D_0805 | D1 |
| 1 | Clock Out | 2JB_Footprints:1X1_100mil_Header | TP1 |
| 1 | GND | 2JB_Footprints:1X1_100mil_Header | TP2 |
| 1 | I2C Test Point | 2JB_Footprints:1X2_100mil_Header | J3 |
| 1 | ISCP | 2JB_Footprints:1X6_100mil_Header | J2 |
| 1 | LOGO | 2JB_Logos:Stacked_ISU_1_5x0_5 | G*** |
| 1 | LOGO | 2JB_Logos:JB_Logo_1_1x0_5 | G*** |
| 1 | LOGO | 2JB_Logos:Bengal_Head_0_5x0_5 | G*** |
| 1 | MIDI Channel | Package_DIP:DIP-8_W7.62mm | SW3 |
| 1 | MIDI In | 2JB_Footprints:DIN-5PIN_MIDI | J8 |
| 1 | MIDI Through | 2JB_Footprints:DIN-5PIN_MIDI | J9 |
| 1 | Note Selection | Package_DIP:DIP-8_W7.62mm | SW2 |
| 1 | PIC16F1788 | Package_SO:SSOP-28_5.3x10.2mm_P0.65mm | U1 |
| 1 | Power | 2JB_Footprints:2PinMolex | J1 |
| 1 | Reset | Button_Switch_THT:SW_PUSH_6mm | SW1 |
The 35 most common of 39 parts.

slacshan/MIDI-Projects
All MIDI Project for Idaho State University RCET



andreasimonetto/lopielle
MIDI synth based on Yamaha OPLL FM synthesis sound chip (YM2413)

Masaharu41/Midi-Bass-Guitar
A repository for all design work, assembly, and schematics for a robotic bass guitar programmed with MIDI

joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch

rusefi/rusefi
rusefi - GPL internal combustion engine control unit

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

ataradov/usb-sniffer-lite
A simple USB sniffer based on Raspberry Pi RP2040

windowsair/wireless-esp8266-dap
CMSIS-DAP compatible wireless debugger for ESP8266/ESP32/ESP32C3/ESP32S3. Optional 40MHz SPI acceleration, etc. 适配多种ESP芯片的无线调试器

It measures 86.5 × 86.3 mm and has 2 copper layers, 1.6 mm thick.
39 parts, built around the PIC16F1788-I/SS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the slacshan/MIDI-Projects repository on GitHub, at the commit this page was made from: the board is Universals/Master/UMaster.kicad_pcb and its schematic BassGuitar/Circuitry/F25/UniversalMaster/UMaster.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask slacshan before reusing the design.