Skip to the content
2 layers87.8 × 71.9 mmUSlave, the printed circuit board in 3D

All MIDI Project for Idaho State University RCET

Size
87.8 × 71.9 mm
Copper layers
2
Thickness
1.6 mm
Parts
31
Nets
48
Pads
137
Tracks, vias
238, 2
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
19 Nov 2025
Updated
19 Dec 2025

Overview

USlave is an open-source printed circuit board by slacshan, from the slacshan/MIDI-Projects repository on GitHub. It is a 2-layer board of 87.8 × 71.9 mm with 31 parts on 48 nets, routed with 238 tracks and 2 vias.

It is built around the PIC16F1788-I/SS. Its parts include 9 connectors, 7 resistors, 3 diodes, 1 capacitor and 1 IC. It belongs with the PIC boards of this library.

Main components

1

Parts

31
QtyValueFootprintReferences
22.2KΩ2JB_Footprints:C_0805R4, R5
2330Ω2JB_Footprints:C_0805R6, R7
2330Ω2JB_Footprints:1x9_100mil_HeaderR2, R3
10-32JB_Footprints:8PinMolex_3.00mmPitchJ6
110KΩ2JB_Footprints:C_0805R1
110µFCapacitor_THT:C_Radial_D6.3mm_H11.0mm_P2.50mmC1
112-152JB_Footprints:8PinMolex_3.00mmPitchJ9
11N41482JB_Footprints:D_0805D1
14-72JB_Footprints:8PinMolex_3.00mmPitchJ7
18-112JB_Footprints:8PinMolex_3.00mmPitchJ8
1Clock Out2JB_Footprints:1X1_100mil_HeaderTP2
1GND2JB_Footprints:1X1_100mil_HeaderTP1
1I2C In2JB_Footprints:RJ11J5
1I2C Test Point2JB_Footprints:1X2_100mil_HeaderJ2
1I2C Through2JB_Footprints:RJ11J4
1ISCP2JB_Footprints:1X6_100mil_HeaderJ3
1LOGO2JB_Logos:Stacked_ISU_1_5x0_5G***
1LOGO2JB_Logos:JB_Logo_1_1x0_5G***
1LOGO2JB_Logos:Bengal_Head_0_5x0_5G***
1PIC16F1788Package_SO:SSOP-28_5.3x10.2mm_P0.65mmU1
1Power In2JB_Footprints:2PinMolexJ1
1Powered2JB_Footprints:D_0805D2
1ResetButton_Switch_THT:SW_TH_Tactile_Omron_B3F-100xSW1
1Status2JB_Footprints:D_0805D3

The 27 most common of 31 parts.

More from slacshan/MIDI-Projects

3
  • 2 layers86.5 × 86.3 mmUMaster, the printed circuit board in 3D

    UMaster

    slacshan/MIDI-Projects

    All MIDI Project for Idaho State University RCET

    39 parts3
  • 2 layers88.1 × 75.2 mmUniversalSolenoidRelay, the printed circuit board in 3D

    UniversalSolenoidRelay

    slacshan/MIDI-Projects

    All MIDI Project for Idaho State University RCET

    38 parts3
  • 2 layers124.1 × 50.8 mmInfrared, the printed circuit board in 3D

    Infrared

    slacshan/MIDI-Projects

    All MIDI Project for Idaho State University RCET

    35 parts3

Similar boards

  • 2 layers100 × 60 mmLopielle, the printed circuit board in 3D

    Lopielle

    andreasimonetto/lopielle

    MIDI synth based on Yamaha OPLL FM synthesis sound chip (YM2413)

    49 parts2
  • 2 layers117.5 × 103.5 mmMotherboard Sch, the printed circuit board in 3D

    Motherboard Sch

    Masaharu41/Midi-Bass-Guitar

    A repository for all design work, assembly, and schematics for a robotic bass guitar programmed with MIDI

    74 parts1GPL-3.0
  • 2 layers44.5 × 46.9 mmOSO SWAT B1-jig, the printed circuit board in 3D

    OSO SWAT B1-jig

    joeycastillo/Sensor-Watch

    A board replacement for the classic Casio F-91W wristwatch

    31 parts2.1k
  • 2 layers65 × 30 mmRgb to hdmi, the printed circuit board in 3D

    Rgb to hdmi

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    31 parts1kGPL-3.0
  • 2 layers191 × 98.5 mmMacroKeypad, the printed circuit board in 3D

    MacroKeypad

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    31 parts915
  • 2 layers39 × 45.2 mmCH32V003F4P6-R0-1v1, the printed circuit board in 3D

    CH32V003F4P6-R0-1v1

    openwch/ch32v003

    CH32V003 is an ultra-cheap RISC-V MCU with 2KB SRAM, 16KB flash, and up to 18 GPIOs that sells for under $0.10

    31 parts599
  • 2 layers26.7 × 27.9 mmBreakout board, the printed circuit board in 3D

    Breakout board

    Luos-io/luos_engine

    Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

    31 parts546MIT
  • 2 layers100 × 50 mmPixelix, the printed circuit board in 3D

    Pixelix

    BlueAndi/Pixelix

    Full RGB LED matrix, based on an ESP32 and WS2812B LEDs or emulated LEDs on TFT.

    31 parts447MIT

Questions

How big is the USlave PCB?

It measures 87.8 × 71.9 mm and has 2 copper layers, 1.6 mm thick.

What parts does the USlave use?

31 parts, built around the PIC16F1788-I/SS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the USlave KiCad files?

From the slacshan/MIDI-Projects repository on GitHub, at the commit this page was made from: the board is Universals/Slave/USlave.kicad_pcb and its schematic BassGuitar/Circuitry/F25/UniversalMaster/UMaster.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the USlave design in my own project?

Its repository states no licence, so its author keeps all rights: ask slacshan before reusing the design.