6 layers70 × 101.3 mm
6 layers288.5 × 121.5 mm
RUSP Mainboard panelMockup
skysedge/RUST_Hardware1KiCad design files for RUSP
- Size
- 288.5 × 121.5 mm
- Copper layers
- 6
- Thickness
- 1.6 mm
- Parts
- 768
- Nets
- 305
- Pads
- 3,276
- Tracks, vias
- 11,541, 1,446
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 24 Jun 2024
- Updated
- 16 Mar 2025
Overview
RUSP Mainboard panelMockup is an open-source printed circuit board by skysedge, from the skysedge/RUST_Hardware repository on GitHub. It is a 6-layer board of 288.5 × 121.5 mm with 768 parts on 305 nets, routed with 11,541 tracks and 1,446 vias.
It is built around the ATMEGA2560V-8AU, 100UF 10V 4*7 and CSD16301Q2, with the DMG2302UK-7 and MMBT3904 among its other parts. Its parts include 210 capacitors, 201 resistors, 66 diodes, 36 connectors and 33 ICs. It belongs with the computers and single-board computers boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
5
ATMEGA2560V-8AU
TQFP-100(14x14)-40℃~+85℃ 1.8V~5.5V 256KB 4KB 8 Bit 86 8KB 8MHz AVR Built-in FLASH TQFP-100(14x14) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontroller Units (MCUs/MPUs/SOCs)100UF 10V 4*7
插件,4x7mm1.5mm 1000hrs@105℃ 100uF 10V 4mm 7mm 插件,4x7mm Aluminum Electrolytic Capacitors - Leaded ROHSLCSCAluminum Electrolytic Capacitors - Leaded
CSD16301Q2
WSON-6(2x2)-55℃~+150℃ 1 N-channel 1.55V 15W 17pF 2.8nC@4.5V 20A 215pF 25V 340pF 34mΩ@3V N-Channel WSON-6(2x2) MOSFETs ROHSTexas InstrumentsMOSFETs
DMG2302UK-7
SOT-23-55℃~+150℃ 1 N-channel 1.4nC@4.5V 130pF 18pF 1V 2.8A 20V 660mW 90mΩ@4.5V SOT-23 MOSFETs ROHSDiodes IncorporatedMOSFETsMMBT3904
SOT-23-55℃~+150℃ 1 NPN 100 100nA 200mA 200mW 300MHz 300mV 40V 6V NPN SOT-23 Bipolar (BJT) ROHSJiangsu Changjing Electronics Technology (CJ)Bipolar (BJT)
Parts
768| Qty | Value | Footprint | References |
|---|---|---|---|
| 63 | 1k5 | Resistor_SMD:R_0603_1608Metric | R17, R17, R17, R45, R45, R45, R46, R46, R46, R47, R47, R47, R48, R48, R48, R49 +47 |
| 48 | .1uF | Capacitor_SMD:C_0603_1608Metric | C2, C2, C2, C3, C10, C10, C10, C11, C11, C11, C18, C18, C18, C19, C19, C19 +32 |
| 39 | TestPoint_Alt | TestPoint:TestPoint_Pad_1.0x1.0mm | GPIO1, GPIO1, GPIO1, GPIO3, GPIO3, GPIO3, GPIO4, GPIO4, GPIO4, RSVD1, RSVD1, RSVD1, T10, T10, T10, T11 +23 |
| 30 | Red/Yellow Bar Meter LED | MyFootprints:LED_Dialight_5988560207F | D25, D25, D25, D26, D26, D26, D27, D27, D27, D28, D28, D28, D29, D29, D29, D30 +14 |
| 27 | 1uF | Capacitor_SMD:C_0402_1005Metric | C43, C43, C43, C45, C45, C45, C51, C51, C51, C52, C52, C52, C53, C53, C53, C55 +11 |
| 21 | 10k | Resistor_SMD:R_0603_1608Metric | R1, R1, R1, R18, R18, R18, R25, R25, R25, R28, R28, R28, R33, R33, R33, R39 +5 |
| 21 | 10nF | Capacitor_SMD:C_0603_1608Metric | C48, C48, C48, C49, C49, C49, C60, C60, C60, C61, C61, C61, C68, C68, C68, C69 +5 |
| 21 | 1k | Resistor_SMD:R_0603_1608Metric | R8, R10, R10, R10, R11, R11, R11, R29, R29, R29, R74, R74, R74, R78, R78, R78 +5 |
| 21 | 1uF/50V | Capacitor_SMD:C_0805_2012Metric | C23, C23, C23, C24, C24, C24, C25, C25, C25, C26, C26, C26, C27, C27, C27, C28 +5 |
| 21 | TestPoint_Alt | TestPoint:TestPoint_Pad_D1.5mm | T3, T3, T3, T4, T4, T4, T5, T5, T5, T6, T6, T6, T7, T21, T21, T21 +5 |
| 18 | 1M | Resistor_SMD:R_0603_1608Metric | R2, R2, R2, R23, R23, R23, R24, R24, R24, R34, R34, R34, R41, R41, R41, R73 +2 |
| 18 | Fiducial | Fiducial:Fiducial_0.75mm_Dia_1.5mm_Outer | FID1, FID1, FID1, FID2, FID2, FID2, FID3, FID3, FID3, FID4, FID4, FID4, FID5, FID5, FID5, FID6 +2 |
| 18 | Tactile Switch | MyFootprints:TactileSwitch_Panasonic_EVQ-Q2Y03W | SW3, SW3, SW3, SW4, SW4, SW4, SW5, SW5, SW5, SW6, SW6, SW6, SW7, SW7, SW7, SW8 +2 |
| 18 | U.FL | Connector_Coaxial:U.FL_Molex_MCRF_73412-0110_Vertical | J4, J4, J4, J5, J13, J13, J13, J14, J14, J14, J15, J15, J15, J16, J16, J16 +2 |
| 15 | 27pF | Capacitor_SMD:C_0603_1608Metric | C1, C1, C1, C46, C46, C46, C47, C47, C47, C62, C62, C62, C63, C63, C63 |
| 15 | 4.7uF/25V | Capacitor_SMD:C_0805_2012Metric | C20, C20, C20, C21, C21, C21, C22, C22, C22, C41, C41, C41, C44, C44, C44 |
| 12 | 100R | Resistor_SMD:R_0603_1608Metric | R19, R19, R19, R20, R20, R20, R40, R40, R40, R65, R65, R65 |
| 12 | 2.2uF LOW-ESR CER. | Capacitor_SMD:C_0603_1608Metric | C15, C15, C15, C50, C50, C50, C54, C54, C54, C72, C72, C72 |
| 12 | 2k2 | Resistor_SMD:R_0402_1005Metric | R13, R13, R13, R14, R14, R14, R35, R35, R35, R38, R38, R38 |
| 12 | EMI Ferrite | Inductor_SMD:L_0402_1005Metric | L5, L5, L5, L6, L6, L6, L7, L7, L7, L8, L8, L8 |
| 12 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | MH1, MH1, MH1, MH3, MH3, MH3, MH4, MH4, MH4, MH8, MH8, MH8 |
| 12 | TVS/Varistor for Audio Filtering | Resistor_SMD:R_0603_1608Metric | D15, D15, D15, D16, D16, D16, D17, D17, D17, D18, D18, D18 |
| 9 | 100k | Resistor_SMD:R_0603_1608Metric | R26, R26, R26, R27, R27, R27, R30, R30, R30 |
| 9 | 10uF/35V | Resistor_SMD:R_1206_3216Metric | C16, C16, C16, C17, C17, C17, C57, C57, C57 |
| 9 | 1uF/16V | Capacitor_SMD:C_0805_2012Metric | C36, C36, C36, C38, C38, C38, C40, C40, C40 |
| 9 | 27R | Resistor_SMD:R_0603_1608Metric | R3, R3, R3, R6, R6, R6, R7, R7, R7 |
| 9 | Logic Shifter | MyFootprints:TXB0108_USON-20_2x4mm_P0.4mm | U2, U2, U2, U8, U8, U8, U10, U10, U10 |
| 9 | MBR0530 Diode for ePaper | Diode_SMD:D_SOD-123 | D10, D10, D10, D11, D11, D11, D12, D12, D12 |
| 6 | 100uF/10V | MyFootprints:Capacitor_Wurth865080243007 | C14, C14, C14, C37, C37, C37 |
| 6 | 12p Male Samtec Connector | MyFootprints:Samtec_2x6Header_FTSH-106-01-L-DV | J3, J3, J3, J6, J6, J6 |
| 6 | 4.7uF | Capacitor_SMD:C_0603_1608Metric | C12, C12, C12, C13, C13, C13 |
| 6 | 47pF | Capacitor_SMD:C_0603_1608Metric | C8, C8, C8, C9, C9, C9 |
| 6 | 4k7 | Resistor_SMD:R_0603_1608Metric | R36, R36, R36, R37, R37, R37 |
| 6 | 5k1 | Resistor_SMD:R_0402_1005Metric | R4, R4, R4, R5, R5, R5 |
| 6 | Amber LED | LED_SMD:LED_0603_1608Metric_Castellated | D2, D2, D2, D5, D5, D5 |
| 6 | CSD16301Q2 | digikey-footprints:TI_CSD16301Q2 | Q3, Q3, Q3, Q4, Q4, Q4 |
| 6 | DMG2302UK-7 | Package_TO_SOT_SMD:SOT-23 | Q1, Q1, Q1, Q2, Q2, Q2 |
| 6 | M1.6 SMT Nut | MyFootprints:SMTSO-M1.6-1ET | MH9, MH9, MH9, MH10, MH10, MH10 |
| 6 | MMBT3904 | Package_TO_SOT_SMD:SOT-23 | Q6, Q6, Q6, Q7, Q7, Q7 |
| 6 | TestPoint | TestPoint:TestPoint_Pad_2.0x2.0mm | TP1, TP1, TP1, TP2, TP2, TP2 |
| 3 | 0.47R | Resistor_SMD:R_0402_1005Metric | R32, R32, R32 |
| 3 | 1.05M | Resistor_SMD:R_0603_1608Metric | R21, R21, R21 |
| 3 | 10R | Resistor_SMD:R_0603_1608Metric | R15, R15, R15 |
| 3 | 10nF/16V | Capacitor_SMD:C_0603_1608Metric | C33, C33, C33 |
| 3 | 10uH | MyFootprints:Inductor10uH_Wurth_744053100 | L3, L3, L3 |
| 3 | 120k | Resistor_SMD:R_0603_1608Metric | R22, R22, R22 |
| 3 | 12V Boost Converter | MyFootprints:BoostConverter_MCP1661 | U7, U7, U7 |
| 3 | 15pF/50V | Capacitor_SMD:C_0603_1608Metric | C31, C31, C31 |
| 3 | 160R (100R for LTST-C191TBKT) | Resistor_SMD:R_0603_1608Metric | R44, R44, R44 |
| 3 | 16MHz Resonator | MyFootprints:AWSCR-16.00CV-T | Y2, Y2, Y2 |
| 3 | 18R | Resistor_SMD:R_0603_1608Metric | R79, R79, R79 |
| 3 | 20V 500mA Schottky for 12V Stage | Diode_SMD:D_SOD-123 | D23, D23, D23 |
| 3 | 20mm Filament | MyFootprints:FilamentLED_20mm | D6, D6, D6 |
| 3 | 2k2 Electret Mic | MyFootprints:Microphone_PUI_POM-2738P-R | MK1, MK1, MK1 |
| 3 | 3.3V Linear Regulator | MyFootprints:LDO_MIC5528 | U6, U6, U6 |
| 3 | 330R | Resistor_SMD:R_0603_1608Metric | R12, R12, R12 |
| 3 | 330uF/6.3V TANTALUM 45mR | MyFootprints:C_2917 | C35, C35, C35 |
| 3 | 4.7uH | MyFootprints:Inductor_Wurth_74438336100 | L2, L2, L2 |
| 3 | 510k | Resistor_SMD:R_0603_1608Metric | R16, R16, R16 |
| 3 | 68pF/50V | Capacitor_SMD:C_0603_1608Metric | C30, C30, C30 |
| 3 | 8.2pF/50V | Capacitor_SMD:C_0603_1608Metric | C32, C32, C32 |
| 3 | 8MHz Resonator | MyFootprints:AWSCR-16.00CV-T | Y1, Y1, Y1 |
| 3 | ATmega16U2-MU as USB Bridge | Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.65x3.65mm | U1, U1, U1 |
| 3 | ATmega2560V-8AU | MyFootprints:ATmega2560_TQFP-100_14x14mm_P0.5mm | U4, U4, U4 |
| 3 | Charge Mgmt. IC | Package_TO_SOT_SMD:SOT-23-5 | U5, U5, U5 |
| 3 | Conn_02x03_Counter_Clockwise | MyFootprints:Tag-Connect_TC2030-IDC_MINIMAL | J17, J17, J17 |
| 3 | Conn_02x03_Counter_Clockwise | MyFootprints:Tag-Connect_TC2030-IDC | J7, J7, J7 |
| 3 | Driver for Bell Coil | MyFootprints:SO-8EP | U11, U11, U11 |
| 3 | FPC Connector for OLED | MyFootprints:Hirose_FPC_FH26W-31S-0.3SHW(60) | J9, J9, J9 |
| 3 | FPC Connector for ePaper | MyFootprints:Molex_24pFPC_Vert_0525592452 | J10, J10, J10 |
| 3 | Ferrite Bead for VBus | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | L1, L1, L1 |
| 3 | Green LED | LED_SMD:LED_0603_1608Metric_Castellated | D4, D4, D4 |
| 3 | LiPo Undervolt Protection IC | Package_SON:WSON-6_1.5x1.5mm_P0.5mm | U3, U3, U3 |
| 3 | Logo1 | MyFootprints:SkysEdge_21mm | LOGO1, LOGO1, LOGO1 |
| 3 | Logo2 | MyFootprints:SkysEdge_18mm | LOGO2, LOGO2, LOGO2 |
| 3 | M2 SMT Nut | MyFootprints:SMTSO-M2-3ET | MH7, MH7, MH7 |
| 3 | MAX9860 CODEC | Package_DFN_QFN:WQFN-24-1EP_4x4mm_P0.5mm_EP2.7x2.7mm | U12, U12, U12 |
| 3 | Mic Switch DPDT | MyFootprints:Switch_DPDT_Nidec_CL-SB-22C-XX | SW10, SW10, SW10 |
| 3 | Mode Switch SP3T | MyFootprints:SP3T_OS103011MA7QP1 | SW1, SW1, SW1 |
| 3 | N-MOSFET 30V 1.4A | Package_TO_SOT_SMD:SOT-323_SC-70 | Q5, Q5, Q5 |
The 732 most common of 768 parts.
More from skysedge/RUST_Hardware
12- 6 layers70 × 101.3 mm
- 4 layers68 × 98 mm
- 4 layers111.3 × 98 mm
- 6 layers72 × 101.3 mm
- 6 layers72 × 101.3 mm
- 4 layers61.3 × 69 mm
- 4 layers61.3 × 70 mm
- 4 layers61.3 × 70 mm
- 2 layers41 × 16 mm
- 2 layers41 × 16 mm
- 2 layers53 × 39 mm
Similar boards
- 4 layers152.4 × 96.5 mm
- 2 layers170.1 × 129.6 mm
- 4 layers204 × 150 mm
Gateway
Kampi/IoT-Gateway
Open-Source Zigbee, Thread, wM-Bus, LoRa, LoRaWAN gateway for Home Assistant.
319 parts1 - 2 layers38 × 90 mm
Acoustic impact ball
akornsys-rdi/acoustic-impact-ball
Acustic impact ball, the system behind «Monster game» artwork
80 partsGPL-3.0 - 2 layers38.5 × 32 mm
- 2 layers32.2 × 15.4 mm
Protector
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.
10 parts4.3kMIT - 4 layers75 × 100 mm
Control Board V3
Thornbots/Electrical
Here is where we store all relevant files for the Electrical team. In here you will store all of the KiCad files that you produce through out the year.
76 parts - 6 layers150 × 87 mm
POWERCORE V2.0 MOTHERBOARD
Rack-Robotics/Powercore-V2.0
Open-Source wire EDM power supply by Rack Robotics, Inc.
254 parts258
Questions
How big is the RUSP Mainboard panelMockup PCB?
It measures 288.5 × 121.5 mm and has 6 copper layers, 1.6 mm thick.
What parts does the RUSP Mainboard panelMockup use?
768 parts, built around the ATMEGA2560V-8AU, 100UF 10V 4*7, CSD16301Q2 and DMG2302UK-7. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the RUSP Mainboard panelMockup KiCad files?
From the skysedge/RUST_Hardware repository on GitHub, at the commit this page was made from: the board is old/102122_Mainboard-TOBY/PanelDesign/RUSP_Mainboard_panelMockup.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the RUSP Mainboard panelMockup design in my own project?
Its repository states no licence, so its author keeps all rights: ask skysedge before reusing the design.