

Digital System Dev
- Size
- 108 × 76.8 mm
- Copper layers
- 6
- Thickness
- 1.56 mm
- Parts
- 89
- Nets
- 119
- Pads
- 500
- Tracks, vias
- 1,645, 340
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 30 Jul 2026
- Updated
- 7 Nov 2026
Overview
Digital System Dev is an open-source printed circuit board by skylar-slideshows, from the skylar-slideshows/Digilog_Capstone repository on GitHub. It is a 6-layer board of 108 × 76.8 mm with 89 parts on 119 nets, routed with 1,645 tracks and 340 vias.
It is built around the AO3400A. Its parts include 31 capacitors, 20 resistors, 13 connectors, 3 ICs and 3 diodes. It belongs with the STM32 boards of this library.
Main components
1README
README.mdDigitally Controlled Analog Mixing Console
Capstone, 2026, Northeastern University Department of Electrical Engineering
Contributors: Skylar Denno, Darya Petrova, Evan Forcucci, Xinhao Chen, Luke Garrity, Daniel Salas
Advisor: Milad Siami
Firmware Documentation
Parts
89| Qty | Value | Footprint | References |
|---|---|---|---|
| 18 | 100n | Capacitor_SMD:C_0603_1608Metric | C3, C5, C7, C10, C11, C12, C13, C14, C15, C30, C31, C32, C35, C36, C37, C38 +2 |
| 8 | 1.5k | Resistor_SMD:R_0603_1608Metric | R7, R8, R9, R10, R11, R12, R13, R14 |
| 8 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP1, JP2, JP3, JP4, JP5, JP6, JP7, JP8 |
| 6 | 10u | Capacitor_SMD:C_1206_3216Metric | C47, C48, C49, C50, C60, C61 |
| 4 | 3.3k | Resistor_SMD:R_0603_1608Metric | R17, R22, R24, R26 |
| 4 | 47 | Resistor_SMD:R_1206_3216Metric | R18, R19, R20, R21 |
| 4 | MountingScrew | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 3 | 10u | Capacitor_SMD:CP_Elec_6.3x5.8 | C62, C63, C64 |
| 3 | LED | LED_SMD:LED_0603_1608Metric | D1, D2, D3 |
| 2 | 1u | Capacitor_SMD:C_0603_1608Metric | C4, C6 |
| 2 | 20p | Capacitor_SMD:C_0603_1608Metric | C1, C2 |
| 2 | 680 | Resistor_SMD:R_0603_1608Metric | R16, R23 |
| 1 | 10V | Connector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_Vertical | J10 |
| 1 | 390 | Resistor_SMD:R_1206_3216Metric | R1 |
| 1 | 3V3 | Connector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_Vertical | J3 |
| 1 | 5V | Connector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_Vertical | J4 |
| 1 | 68 | Resistor_SMD:R_1206_3216Metric | R25 |
| 1 | AO3400A | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | DC_IN | Connector_BarrelJack:BarrelJack_Horizontal | J9 |
| 1 | DFR0570 | My Footprints:DFR05xx_DC-DC | U2 |
| 1 | DFR0571 | My Footprints:DFR05xx_DC-DC | U3 |
| 1 | DISP | Connector_PinHeader_2.54mm:PinHeader_2x06_P2.54mm_Vertical | J7 |
| 1 | DISP0 | Connector_FFC-FPC:TE_2-1734839-2_1x22-1MP_P0.5mm_Horizontal | J17 |
| 1 | DISP1 | Connector_FFC-FPC:TE_2-1734839-2_1x22-1MP_P0.5mm_Horizontal | J18 |
| 1 | DISP2 | Connector_FFC-FPC:TE_2-1734839-2_1x22-1MP_P0.5mm_Horizontal | J19 |
| 1 | DISP3 | Connector_FFC-FPC:TE_2-1734839-2_1x22-1MP_P0.5mm_Horizontal | J20 |
| 1 | FerriteBead | PCM_Ferrite_SMD_AKL:Ferrite_0603_1608Metric | FB1 |
| 1 | GND | Connector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_Vertical | J5 |
| 1 | HSE_24 | Crystal:Crystal_SMD_HC49-SD | X1 |
| 1 | LOGO | LOGO | G*** |
| 1 | PINS_LEFT | My Footprints:PinHeader_3x18_P2.54mm_Vertical_GND | J2 |
| 1 | PINS_RIGHT | My Footprints:PinHeader_3x18_P2.54mm_Vertical_GND | J6 |
| 1 | RESET | Button_Switch_SMD:SW_Push_1P1T_NO_CK_KMR2 | SW1 |
| 1 | STLINK | My Footprints:FTSH-107-01-L-DV-K-TR | J1 |
| 1 | STM32G474VETx | Package_QFP:LQFP-100_14x14mm_P0.5mm | U1 |
The 87 most common of 89 parts.
More from skylar-slideshows/Digilog_Capstone
12- 6 layers146 × 320 mm

- 2 layers

- 6 layers36 × 158 mm

- 2 layers

- 4 layers108 × 77 mm

- 4 layers146 × 299.7 mm

- 2 layers106.9 × 93.9 mm

- 4 layers36 × 86 mm

- 4 layers146 × 103 mm

- 4 layers36 × 95 mm

- 4 layers24 × 24 mm

- 4 layers36 × 106 mm

Similar boards
- 4 layers149 × 95 mm

- 4 layers40 × 23 mm

- 4 layers81.2 × 96.6 mm

- 2 layers55 × 82.7 mm

- 4 layers42 × 42 mm

- 4 layers98 × 75 mm

PiFinder4
brickbots/PiFinder
A plate solving telescope finder based around a Raspberry PI and RPI HQ Camera
157 parts257GPL-3.0 - 2 layers240 × 240 mm

- 2 layers141.5 × 83 mm

Rolio
MickiusMousius/Rolio46Keyboard
A split wireless keyboard based on the Corne and Sofle
110 parts236MIT
Questions
How big is the Digital System Dev PCB?
It measures 108 × 76.8 mm and has 6 copper layers, 1.56 mm thick.
What parts does the Digital System Dev use?
89 parts, built around the AO3400A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Digital System Dev KiCad files?
From the skylar-slideshows/Digilog_Capstone repository on GitHub, at the commit this page was made from: the board is PCB_CAD/00 Digital System Dev/Digital System Dev.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Digital System Dev design in my own project?
Its repository states no licence, so its author keeps all rights: ask skylar-slideshows before reusing the design.