Skip to the content
2 layers132.4 × 116.6 mmLoenahCS right, the printed circuit board in 3D

LoenahCS right

sky2park/loenah56

Loenah56, A split-keyboard with 56 keys.

Size
132.4 × 116.6 mm
Copper layers
2
Thickness
1.6 mm
Parts
61
Nets
52
Pads
348
Tracks, vias
413, 44
Pours
1
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
8 Apr 2025
Updated
8 Apr 2025

Overview

LoenahCS right is an open-source printed circuit board by sky2park, from the sky2park/loenah56 repository on GitHub. It is a 2-layer board of 132.4 × 116.6 mm with 61 parts on 52 nets, routed with 413 tracks and 44 vias.

Its parts include 28 diodes, 2 resistors, 2 ICs and 1 connector. It belongs with the keyboards and input boards of this library.

README

README.md

loenah56

Loenah56, A split-keyboard with 56 keys.

How to flash firmware

Use qmk toolbox. Copy loenah folder to qmk toolbox keyboard folder.

Connect one side with bootloader mode. Execute qmk toolbox and execute below line.

qmk flash -kb loenah -km default -bl uf2-split-left (for left)

qmk flash -kb loenah -km default -bl uf2-split-right (for right)

Connect other side and do as same.

Parts

61
QtyValueFootprintReferences
28D_SmallDiode_SMD:D_SOD-123D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +12
27MX_SW_HSPCM_marbastlib-mx:SW_MX_HS_CPG151101S11_1uMX1, MX2, MX10, MX11, MX12, MX13, MX14, MX15, MX16, MX17, MX18, MX19, MX20, MX21, MX22, MX23 +11
2ResistorScottoKeebs_Components:Resistor_0402R1, R2
1Conn_01x04Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ2
1MX_SW_HSPCM_marbastlib-mx:SW_MX_HS_CPG151101S11_1.5uMX25
1TRRSScottoKeebs_Components:TRRS_PJ-320AU2
1~ScottoKeebs_MCU:Adafruit_KB2040U1

Similar boards

  • 2 layers390 × 78.2 mmMBO, the printed circuit board in 3D

    MBO

    shanteacontrols/OpenDeck

    A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.

    61 parts960Apache-2.0
  • 2 layersTUSS4470 shield, the printed circuit board in 3D

    TUSS4470 shield

    Neumi/open_echo

    Open Source echo sounder / depth sounder / SONAR for bathymetry and research. Arduino based and compatible.

    61 parts530
  • 2 layers45 × 45 mmAirCube, the printed circuit board in 3D

    AirCube

    StuckAtPrototype/AirCube

    Works standalone out of the box. Pairs with Home Assistant in minutes. Other platforms are supported through community-contributed extensions.

    61 parts379Apache-2.0
  • 2 layers135.9 × 89.5 mmLeft, the printed circuit board in 3D

    Left

    TeXitoi/keyseebee

    KeySeeBee is a split ergo keyboard. It is only 2 PCB (so the name) with (almost) only SMD components on it. It's only a keyboard, no LED, no display, nothing more than keys and USB.

    61 parts348MIT
  • 2 layers59.7 × 57.5 mmFunBox, the printed circuit board in 3D

    FunBox

    GuitarML/FunBox

    Stereo guitar pedal platform using Daisy Seed.

    61 parts289MIT
  • 2 layers35 × 38.4 mmHandgelenk, the printed circuit board in 3D

    Handgelenk

    Jeija/esp8266-smartwatch

    ESP8266 DIY WiFi Smartwatch with MPU-9250, RTC, OLED, FT232, ...

    61 parts233
  • 2 layers99.9 × 99.9 mmEasy z80, the printed circuit board in 3D

    Easy z80

    skiselev/easy_z80

    An easy to build Zilog Z80 based single board computer

    61 parts180GPL-3.0
  • 2 layers135.3 × 106.7 mmAdlib, the printed circuit board in 3D

    Adlib

    schlae/adlib

    Reproduction AdLib Sound Card, OPL2, Circa 1990

    61 parts168

Questions

How big is the LoenahCS right PCB?

It measures 132.4 × 116.6 mm and has 2 copper layers, 1.6 mm thick.

What parts does the LoenahCS right use?

61 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the LoenahCS right KiCad files?

From the sky2park/loenah56 repository on GitHub, at the commit this page was made from: the board is pcb/right/LoenahCS-right.kicad_pcb and its schematic pcb/left/LoenahCS-left.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the LoenahCS right design in my own project?

Its repository states no licence, so its author keeps all rights: ask sky2park before reusing the design.