Skip to the content
4 layers25 × 62 mmLatency tester, the printed circuit board in 3D

Device to test "glass to glass" video latency

Size
25 × 62 mm
Copper layers
4
Thickness
1.61 mm
Parts
33
Nets
50
Pads
160
Tracks, vias
173, 49
Pours
12
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
10 Aug 2026
Updated
19 Aug 2026

Overview

Latency tester is an open-source printed circuit board by skrewby, from the skrewby/latency-tester repository on GitHub, published under the MIT licence. It is a 4-layer board of 25 × 62 mm with 33 parts on 50 nets, routed with 173 tracks and 49 vias.

It is built around the STM32F042K6T6, AMS1117-3.3 and USBLC6-2P6, with the MMBT2222A among its other parts. Its parts include 10 resistors, 6 capacitors, 5 connectors, 3 ICs and 1 transistor. It belongs with the STM32 boards of this library.

Main components

4

README

README.md

Latency Tester

Device to test "glass to glass" video latency. It uses a LED which the video camera focuses on and a photoresistor at the display to detect the latency.

Parts

33
QtyValueFootprintReferences
4M2MountingHole:MountingHole_2.2mm_M2_Pad_ViaMH1, MH2, MH3, MH4
30RResistor_SMD:R_1206_3216MetricR7, R9, R10
3100nCapacitor_SMD:C_0603_1608MetricC4, C5, C6
3FiducialFiducial:Fiducial_1mm_Mask2mmFID1, FID2, FID3
210uCapacitor_SMD:C_0603_1608MetricC1, C3
222RResistor_SMD:R_0603_1608MetricR3, R4
25k1Resistor_SMD:R_0603_1608MetricR1, R2
1100Resistor_SMD:R_1206_3216MetricR5
1100kResistor_SMD:R_0603_1608MetricR8
11kResistor_SMD:R_0805_2012MetricR6
120uCapacitor_Tantalum_SMD:CP_EIA-3528-21_Kemet-BC2
1AMS1117-3.3Package_TO_SOT_SMD:SOT-223-3_TabPin2U3
1Display ConnectorConnector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_VerticalJ5
1Ferrite BeadInductor_SMD:L_0805_2012MetricFB1
1LED ConnectorConnector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_HorizontalJ3
1MMBT2222APackage_TO_SOT_SMD:SOT-23Q1
1Photoresistor ConnectorConnector_JST:JST_PH_S4B-PH-K_1x04_P2.00mm_HorizontalJ4
1STM32F042K6T6Package_QFP:LQFP-32_7x7mm_P0.8mmU1
1SWD ConnectorConnector_PinHeader_1.27mm:PinHeader_2x05_P1.27mm_Vertical_SMDJ2
1USB ConnectorConnector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12J1
1USBLC6-2P6Package_TO_SOT_SMD:SOT-666U2

Similar boards

  • 2 layers282.6 × 92 mmChavdai40, the printed circuit board in 3D

    Chavdai40

    dvorak55/chavdai40

    Challenge to Handle Acoustic-noise, Verify Drastic Abductive Implementation.

    109 parts6MIT
  • 4 layers113 × 93.7 mmCharacterizer, the printed circuit board in 3D

    Characterizer

    patrickyeon/battery-characterizer

    battery tester/characterizer hardware, firmware.

    217 parts4
  • 2 layersExample, the printed circuit board in 3D

    Example

    danderson/kidraw

    Kidraw is a library to programmatically build Kicad schematic and footprint libraries. It was created out of frustration with Kicad's inconsistent built-in libraries, and the tedium of building cookie cutter parts in…

    10 parts2Apache-2.0
  • 4 layers52 × 74 mmFRC Sensor CAN, the printed circuit board in 3D

    FRC Sensor CAN

    barkinvar/sugerCANe

    A compact interface for three NPN, PNP or logic sensors on an FRC robot. Each port has a removable 5 V / 12 V power jumper; input type is configured in software.

    144 parts1
  • 2 layers77.5 × 15 mmLin tester, the printed circuit board in 3D

    Lin tester

    Bartek0x00/USRTLIN-PCB

    PCB files and documentation for USRTLIN converter project

    37 parts1MIT
  • 2 layers67 × 45 mmUVDAR Board, the printed circuit board in 3D

    UVDAR Board

    ctu-mrs/mrs_hw_uvdar

    Hardware for UVDAR.

    63 parts1MIT
  • 2 layers52.5 × 55 mmUsb switch, the printed circuit board in 3D

    Usb switch

    danderson/ee-usb-switch

    USB-controlled load switches

    68 parts
  • 2 layers66 × 26 mmAltimetro, the printed circuit board in 3D

    Altimetro

    Daniel-Alencar/MiniEasy

    Esquemático KiCad 10 de um altímetro barométrico de recuperação dupla (apogeu + principal), equivalente em função ao Altus Metrum EasyMini: sensor barométrico, registro de voo em flash, dois canais pirotécnicos com…

    56 parts

Questions

How big is the Latency tester PCB?

It measures 25 × 62 mm and has 4 copper layers, 1.61 mm thick.

What parts does the Latency tester use?

33 parts, built around the STM32F042K6T6, AMS1117-3.3, USBLC6-2P6 and MMBT2222A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Latency tester KiCad files?

From the skrewby/latency-tester repository on GitHub, at the commit this page was made from: the board is hardware/latency-tester.kicad_pcb and its schematic hardware/latency-tester.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Latency tester design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).