
Chavdai40
dvorak55/chavdai40
Challenge to Handle Acoustic-noise, Verify Drastic Abductive Implementation.

Device to test "glass to glass" video latency
Latency tester is an open-source printed circuit board by skrewby, from the skrewby/latency-tester repository on GitHub, published under the MIT licence. It is a 4-layer board of 25 × 62 mm with 33 parts on 50 nets, routed with 173 tracks and 49 vias.
It is built around the STM32F042K6T6, AMS1117-3.3 and USBLC6-2P6, with the MMBT2222A among its other parts. Its parts include 10 resistors, 6 capacitors, 5 connectors, 3 ICs and 1 transistor. It belongs with the STM32 boards of this library.
Device to test "glass to glass" video latency. It uses a LED which the video camera focuses on and a photoresistor at the display to detect the latency.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | M2 | MountingHole:MountingHole_2.2mm_M2_Pad_Via | MH1, MH2, MH3, MH4 |
| 3 | 0R | Resistor_SMD:R_1206_3216Metric | R7, R9, R10 |
| 3 | 100n | Capacitor_SMD:C_0603_1608Metric | C4, C5, C6 |
| 3 | Fiducial | Fiducial:Fiducial_1mm_Mask2mm | FID1, FID2, FID3 |
| 2 | 10u | Capacitor_SMD:C_0603_1608Metric | C1, C3 |
| 2 | 22R | Resistor_SMD:R_0603_1608Metric | R3, R4 |
| 2 | 5k1 | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 1 | 100 | Resistor_SMD:R_1206_3216Metric | R5 |
| 1 | 100k | Resistor_SMD:R_0603_1608Metric | R8 |
| 1 | 1k | Resistor_SMD:R_0805_2012Metric | R6 |
| 1 | 20u | Capacitor_Tantalum_SMD:CP_EIA-3528-21_Kemet-B | C2 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | Display Connector | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J5 |
| 1 | Ferrite Bead | Inductor_SMD:L_0805_2012Metric | FB1 |
| 1 | LED Connector | Connector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | J3 |
| 1 | MMBT2222A | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | Photoresistor Connector | Connector_JST:JST_PH_S4B-PH-K_1x04_P2.00mm_Horizontal | J4 |
| 1 | STM32F042K6T6 | Package_QFP:LQFP-32_7x7mm_P0.8mm | U1 |
| 1 | SWD Connector | Connector_PinHeader_1.27mm:PinHeader_2x05_P1.27mm_Vertical_SMD | J2 |
| 1 | USB Connector | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | USBLC6-2P6 | Package_TO_SOT_SMD:SOT-666 | U2 |

dvorak55/chavdai40
Challenge to Handle Acoustic-noise, Verify Drastic Abductive Implementation.

patrickyeon/battery-characterizer
battery tester/characterizer hardware, firmware.

danderson/kidraw
Kidraw is a library to programmatically build Kicad schematic and footprint libraries. It was created out of frustration with Kicad's inconsistent built-in libraries, and the tedium of building cookie cutter parts in…

barkinvar/sugerCANe
A compact interface for three NPN, PNP or logic sensors on an FRC robot. Each port has a removable 5 V / 12 V power jumper; input type is configured in software.

Bartek0x00/USRTLIN-PCB
PCB files and documentation for USRTLIN converter project



Daniel-Alencar/MiniEasy
Esquemático KiCad 10 de um altímetro barométrico de recuperação dupla (apogeu + principal), equivalente em função ao Altus Metrum EasyMini: sensor barométrico, registro de voo em flash, dois canais pirotécnicos com…
It measures 25 × 62 mm and has 4 copper layers, 1.61 mm thick.
33 parts, built around the STM32F042K6T6, AMS1117-3.3, USBLC6-2P6 and MMBT2222A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the skrewby/latency-tester repository on GitHub, at the commit this page was made from: the board is hardware/latency-tester.kicad_pcb and its schematic hardware/latency-tester.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).