

Rocketpcb
CAD Files + Code
- Size
- 29 × 69.8 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 69
- Nets
- 120
- Pads
- 360
- Tracks, vias
- 682, 121
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 2 Apr 2026
- Updated
- 11 Aug 2026
Overview
Rocketpcb is an open-source printed circuit board by sjacksonhodum, from the sjacksonhodum/projectrocketship repository on GitHub. It is a 4-layer board of 29 × 69.8 mm with 69 parts on 120 nets, routed with 682 tracks and 121 vias.
It is built around the W25Q128JVSIQ, LSM9DS1 and WS2812B-2020, with the OSTTE020104, BAT54C and BZV55B5V1 among its other parts. Its parts include 28 capacitors, 9 diodes, 8 resistors, 8 ICs and 8 connectors. It belongs with the STM32 boards of this library.
Main components
6W25Q128JVSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 120ms@(32KB) 128Mbit 133MHz 1uA 2.7V~3.6V 20 Years 3ms Power-on reset、Hardware write protection、Software write protection、Write enable latch、Absolute write protection SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASHLSM9DS1
LGA-24(3x3.5)-40℃~+85℃ 1.9V~3.6V 16bit Accelerometer Gyroscope SPI、I2C X,Y,Z X,Y,Z ±16g ±2000dps LGA-24(3x3.5) Accelerometers ROHSSTMicroelectronicsAccelerometersWS2812B-2020
SMD,2.2x2mm0.6mA 0.84mm 120us 160mcd 200mcd 2kHz 2mm 2mm 300ns 470.4nm 515.6nm 520mcd 5V 622.5nm 800Kbit/s Built-in power-on reset circuit、Built-in power-on reset circuit、Integrated intelligent reverse connection protection function Top-mount SMD,2.2x2mm RGB LEDs(Built-in IC) ROHSWorldsemiRGB LEDs(Built-In IC)OSTTE020104
插件,P=3.5mm-40℃~+115℃ 1 10A 125V 16~26 1x2P 2 2P 3.5mm Black Through Hole 插件,P=3.5mm Screw Terminal Blocks ROHSOn-Shore TechScrew Terminal BlocksBAT54C
SOT-231 Pair Common Cathode 200mA 2uA@25V 30V 600mA 800mV@100mA SOT-23 Schottky Diodes ROHSNexperiaSchottky DiodesBZV55B5V1
LL-34-65℃~+200℃ 1 Independent 100nA@1V 35Ω 5.1V 500mW 550Ω 5V~5.2V LL-34 Zener Diodes ROHSLGEZener Diodes
README
README.mdprojectrocketship
These are some of the design files used to build a G class mid-power rocket with avionics. Please note that this project is not intended to be replicated.
Parts
69| Qty | Value | Footprint | References |
|---|---|---|---|
| 18 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C1, C2, C3, C4, C11, C12, C14, C15, C16, C18, C22, C24-29, C25, C26, C27, C28 +2 |
| 4 | WS2812B-2020 | LED_SMD:LED_WS2812B-2020_PLCC4_2.0x2.0mm | D5, D6, D7, D8 |
| 3 | SW_Push | Button_Switch_SMD:SW_SPST_B3U-1000P | SW1, SW2, SW3 |
| 2 | 0R | Resistor_SMD:R_0402_1005Metric | R7, R8 |
| 2 | 10K | Resistor_SMD:R_0402_1005Metric | R3, R4 |
| 2 | 10pF | Capacitor_SMD:C_0402_1005Metric | C20, C21 |
| 2 | 2.2uF | Capacitor_SMD:C_0603_1608Metric | C17, C19 |
| 2 | 20pF | Capacitor_SMD:C_0402_1005Metric | C9, C10 |
| 2 | 4.7k | Resistor_SMD:R_0402_1005Metric | R5, R6 |
| 2 | A4950E | Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm | U6, U7 |
| 2 | LED | LED_SMD:LED_0805_2012Metric | D3, D4 |
| 2 | OSTTE020104 | footprints:OST_OSTTE020104 | P2, P3 |
| 1 | 100kΩ | Resistor_SMD:R_0402_1005Metric | R9 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric | C23 |
| 1 | 1uF | Capacitor_SMD:C_0402_1005Metric | C29 |
| 1 | 1uF | Capacitor_SMD:C_0805_2012Metric | C7 |
| 1 | 25M | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 32.768K | Crystal:Crystal_SMD_2012-2Pin_2.0x1.2mm | Y2 |
| 1 | 33kΩ | Resistor_SMD:R_0402_1005Metric | R10 |
| 1 | 4.7uF | Capacitor_SMD:C_0805_2012Metric | C5 |
| 1 | BAT54C | Package_TO_SOT_SMD:SOT-23 | D9 |
| 1 | BZV55B5V1 | Diode_SMD:D_MiniMELF | D2 |
| 1 | Battery_Cell | Battery:Battery_Panasonic_CR1025-VSK_Vertical_CircularHoles | BT1 |
| 1 | Conn_01x02 | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J6 |
| 1 | Conn_01x03 | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J4 |
| 1 | Conn_01x04 | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J3 |
| 1 | Conn_01x05 | Connector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_Vertical | J2 |
| 1 | D | Capacitor_SMD:C_0805_2012Metric | D1 |
| 1 | LOGO | footprints:issaclogo | G*** |
| 1 | LOGO | footprints:prs | G*** |
| 1 | LSM9DS1 | Package_LGA:LGA-24L_3x3.5mm_P0.43mm | U4 |
| 1 | LoRa | footprints:LoRa | IC1 |
| 1 | MS5607-02BA | Package_LGA:LGA-8_3x5mm_P1.25mm | U1 |
| 1 | Micro_SD_Card | Connector_Card:microSD_HC_Hirose_DM3BT-DSF-PEJS | J1 |
| 1 | STM32H743VITx | Package_QFP:LQFP-100_14x14mm_P0.5mm | U5 |
| 1 | USB_C_Plug_USB2.0 | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | P1 |
| 1 | W25Q128JVS | Package_SO:SOIC-8_5.3x5.3mm_P1.27mm | U2 |
| 1 | ~ | Package_DFN_QFN:DFN-6-1EP_3x3mm_P0.95mm_EP1.7x2.6mm | U3 |
Similar boards
- 4 layers76.2 × 25.4 mm

- 2 layers50 × 60 mm

- 2 layers34.7 × 1 mm

- 2 layers194 × 129.5 mm

- 4 layers95 × 77 mm

Tachometer
Churrosoft/Dashdash
tablero de instrumentos por can para integrar con OpenEFI, cuando se nos ocurra algo mas original cambiamos el nombre
207 parts1MIT - 2 layers51 × 21 mm

DEV BOARD
Gusus169/FORGE-V1.0
This project uses: - KiCad - Blender for 3D renders - Based on the Hack Club dev board tutorial
55 partsMIT - 2 layers40 × 40 mm

- 4 layers160 × 73.2 mm

MainPCB
doppelgrau/esp32-f9p-io-board
An IO-PCB (two motor-driver/H-bridge, CAN, RS232, ADS1115, relay, ethernet, ardusimple f9p compatible connector) with an ESP32 for 12V power, three 15V tolerant analog inputs, three 5V tolerant inputs.
162 parts39
Questions
How big is the Rocketpcb PCB?
It measures 29 × 69.8 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Rocketpcb use?
69 parts, built around the W25Q128JVSIQ, LSM9DS1, WS2812B-2020 and OSTTE020104. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Rocketpcb KiCad files?
From the sjacksonhodum/projectrocketship repository on GitHub, at the commit this page was made from: the board is KiCad/rocketpcb.kicad_pcb and its schematic KiCad/rocketpcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Rocketpcb design in my own project?
Its repository states no licence, so its author keeps all rights: ask sjacksonhodum before reusing the design.