2 layers67 × 44 mm
WifiDoorBell D1-mini
thorsten-l/ESP8266-WiFi-Doorbell-Gateway
A gateway for your doorbell button ;-)
15 parts10Apache-2.0
2 layers65 × 56 mm
Yato Control
Sir-Quickly/Yato_Control_Interface4Interface PCB to enable exterbnal control of the Yato / Hendi Induction cooker
- Size
- 65 × 56 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 19
- Nets
- 16
- Pads
- 62
- Tracks, vias
- 132, 7
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 2 Jun 2020
- Updated
- 2 Dec 2021
Overview
Yato Control is an open-source printed circuit board by Sir-Quickly, from the Sir-Quickly/Yato_Control_Interface repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 65 × 56 mm with 19 parts on 16 nets, routed with 132 tracks and 7 vias.
It is built around the LTV-827. Its parts include 6 resistors, 4 capacitors, 3 connectors and 2 ICs.
Main components
1README
README.mdYato_Control_Interface
Interface Leiterplatte zur Fernsteuerung von YATO (YG-04700)- und Hendi (3500 M)-Induktionsplatten
Achtung: Im Betrieb und selbst im ausgeschalteten Zustand können auf der Leiterplatte potentiell gefährliche Spannungen anliegen, selbst nach dem Ziehen des Netzsteckers durch geladenen Kapzitäten. Die Benutzung dieses Designs erfolgt auf eigenes Risiko und nur durch fachkundige Personen, die sich über die Gefahren und Risiken im Klaren sind.
Änderungen gegenüber V1.0
- Pulldown Widerstand für das On-Signal von der YATO Poti-Platine
- Pos. R4 korrigiert
Parts
19| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole | MountingHole:MountingHole_4mm | H1, H2, H3, H4 |
| 3 | Conn_01x04 | Connector_JST:JST_XH_B04B-XH-A_1x04_P2.50mm_Vertical | J1, J2, J3 |
| 2 | 100n | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C2, C3 |
| 2 | 220R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2 |
| 2 | 4k7 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3, R6 |
| 1 | 100uF | Capacitor_THT:CP_Radial_D10.0mm_P2.50mm_P5.00mm | C1 |
| 1 | 1k0 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R4 |
| 1 | 3k9 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R5 |
| 1 | 4053 | Package_DIP:DIP-16_W10.16mm | U3 |
| 1 | 4u7 | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C4 |
| 1 | LTV-827 | Package_DIP:DIP-8_W7.62mm | U1 |
Questions
How big is the Yato Control PCB?
It measures 65 × 56 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Yato Control use?
19 parts, built around the LTV-827. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Yato Control KiCad files?
From the Sir-Quickly/Yato_Control_Interface repository on GitHub, at the commit this page was made from: the board is Yato_Control.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Yato Control design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers85 × 56 mm
Hub75 sourcing output
Peter-van-Tol/HUB-75-boards
The HUB-75 boards is a collection of break-out boards (BOBs) for HUB-75 connnectors found on re-purposed FPGA cards such as the 5A-75B and 5A-75E.
129 parts8 - 2 layers123 × 74 mm
- 2 layers102.9 × 86.4 mm
- 4 layers80 × 80 mm
- 2 layers
Linde steering
Technariumas/smalsiukas
The conversion of a forklift truck to a line following robot.
27 partsApache-2.0 - 2 layers43.9 × 27.7 mm
- 2 layers50 × 60 mm
Debate Device
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
19 parts915