
Esp32-wroom timer
AlessandroAU/Chorus32-ESP32LapTimer
This is an ESP32 port of the popular Chorus RF Laptimer

Aquest projecte consisteix en el disseny i construcció d'un coet, tant del hardware com del software!
Coet PCB is an open-source printed circuit board by Singh031, from the Singh031/cuddly-adventure repository on GitHub, published under the MIT licence. It is a 2-layer board with 15 parts on 91 nets.
It is built around the TEENSY 4.1 and MP1584EN. Its parts include 5 ICs, 3 resistors, 2 capacitors and 1 diode. It belongs with the NXP (LPC, Kinetis, i.MX RT) boards of this library.
Aquest projecte consisteix en el disseny i construcció d'un coet, tant del hardware com del software!
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | C_US | Capacitor_SMD:CP_Elec_8x5.4 | C1_100uf1, C1_470uf1 |
| 1 | BMP280 Stemma | BMP280:BMP280 | U3 |
| 1 | BNO055 Stemma | BNO055:BNO055 | U1 |
| 1 | Buzzer | Buzzer_Beeper:Buzzer_TDK_PS1240P02BT_D12.2mm_H6.5mm | BZ1 |
| 1 | LED_ABGR | LED_THT:LED_D5.0mm-4_RGB_Wide_Pins | D1 |
| 1 | MP1584EN | MP1584EN:MP1584EN | U4 |
| 1 | Parachute | Connector_PinHeader_1.00mm:PinHeader_1x03_P1.00mm_Vertical | M3 |
| 1 | R1 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | R20 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2 |
| 1 | R67 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3 |
| 1 | TVC1 | Connector_PinHeader_1.00mm:PinHeader_1x03_P1.00mm_Vertical | M1 |
| 1 | TVC2 | Connector_PinHeader_1.00mm:PinHeader_1x03_P1.00mm_Vertical | M2 |
| 1 | Teensy4.1 | teensy:Teensy41 | U2 |
| 1 | XL4015_DC | XL4015DC:XL4015 DC-DC | U5 |

AlessandroAU/Chorus32-ESP32LapTimer
This is an ESP32 port of the popular Chorus RF Laptimer

langpie/langpie
An Opensource Raspberry Pi Based Smart Car Project (ORPSC Project) - 树莓派开源智能车项目

ghent360/PrntrBoardV2
32-bit 3D Printer controller board using STM32F407 and replaceable TMC2660/2209 stepper drivers.

4rynv/Eklavya_Gantry
an attempt to automate screwing out and in of screw holes arranged in a matrix formation



kavers1/wirebender
3D designs are shared in STL format. The 3D model is available as a Fusion 360 project Wire bender

merlindorin/esp32-fan-controller
A small KiCad board to keep my home server cabinet cool. 4 PWM fans, 4 temperature probes, one ESP32.
15 parts, built around the TEENSY 4.1 and MP1584EN. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Singh031/cuddly-adventure repository on GitHub, at the commit this page was made from: the board is Kicad/Coet PCB/Coet PCB.kicad_pcb and its schematic Kicad/Coet PCB/Coet PCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).