Skip to the content
2 layers100 × 45.5 mmJelgen, the printed circuit board in 3D

SEM-es irányított hangszórós projekt

Size
100 × 45.5 mm
Copper layers
2
Thickness
1.59 mm
Parts
24
Nets
15
Pads
69
Tracks, vias
102, 6
Pours
1
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
16 Apr 2025
Updated
16 Oct 2026

Overview

Jelgen is an open-source printed circuit board by simonyiszk, from the simonyiszk/sem-ultrahang repository on GitHub. It is a 2-layer board of 100 × 45.5 mm with 24 parts on 15 nets, routed with 102 tracks and 6 vias.

It is built around the TL072. Its parts include 4 resistors, 2 capacitors, 2 ICs and 1 connector.

Main components

1

README

README.md

Ultrahangos hangszóró

Célkitűzés

A projekt során egy ultrahangos irányított hangszórót tervezünk és valósítunk meg először analóg, majd digitális elektronikai alkatrészek felhasználásával. Az elkészült hangszórót standolásokon bemutatható kísérleti eszköznek szánjuk, az öncélú szórakozáson kívül (zenehallgatás) akusztikával kapcsolatos fizikai kísérletek szemléltetésére, mint például:

  • hanghullámok terjedésének és tulajdonságainak vizsgálata
  • ultrahangos lebegtetés

Analóg verzió

A rendszer blokkvázlata az alábbi ábrán látható: blockdiagram A jelforrást egyelőre nem specifikáltuk. Az analóg verzióban PWM modulátort és a hozzá tartozó oszcillátort műveleti erősítőkkel valósítjuk meg. Kapcsolóüzemű végerősítőfokozat gyanánt H-hidat, a prototípusban TC4427 típusú gate-meghajtó IC-t használunk. Hangszóróként az internetről rendelt 40 kHz rezonanciafrekvenciájú ultrahangos adó szolgál.

Mérföldkövek

  • PWM modulátor műveleti erősítővel
    • Integrátor építése és mérése
    • Hiszterézises komparátor építése és mérése
    • Komplett prototípus megépítése breadboard-on
    • Dokumentálás
    • Áramkörtervezés
  • Jelforrás specifikációja
    • Szükséges terveznivalók
  • Végfok
    • H-híd tervezése (szükséges egyáltalán?)
  • Hangszórómátrix
  • Rendszerintegráció
    • NYÁK tervezés
    • Gyártás
    • Beültetés

Side quest-ek

  • Ultrahangos lebegtető
    • TC4427 tesztje
    • Oszcillátor aszimmetrikus táplálásának megoldása
    • Hullámhossz meghatározása a pozicionáláshoz
    • Önjáró prototípus megépítése (amihez csak táp kell, és működik)
  • Tápegység tervezése
    • TBD

Digitális verzió

(Még nem tartunk itt... egyébként a 2025-ös tanfolyampanelt szeretnénk hozzá használni.)

Dokumentáció

A hierarchikus schematic dokumentációja itt érhető el.

Parts

24
QtyValueFootprintReferences
8Conn_01x03_Socketsajat:sajat_pin3OJ1, OJ2, OJ3, OJ4, OJ5, OJ6, OJ7, OJ8
4TestPointConnector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_VerticalTP1, TP2, TP3, TP4
3R_PotentiometerPotentiometer_THT:Potentiometer_Bourns_3266Y_VerticalRV1, RV2, RV4
21kResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_HorizontalR1, R4
2TL072Package_DIP:DIP-8_W7.62mm_LongPadsU1, U2
1100nCapacitor_THT:C_Axial_L5.1mm_D3.1mm_P7.50mm_HorizontalC2
12,4kResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_HorizontalR3
12kResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_HorizontalR2
13,2nCapacitor_THT:C_Axial_L5.1mm_D3.1mm_P7.50mm_HorizontalC1
1Conn_01x04_PinConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_HorizontalJ1

More from simonyiszk/sem-ultrahang

1
  • 2 layers29.5 × 39 mmH híd, the printed circuit board in 3D

    H híd

    simonyiszk/sem-ultrahang

    SEM-es irányított hangszórós projekt

    12 parts

Similar boards

  • 2 layers148 × 84.5 mmPanel daisy, the printed circuit board in 3D

    Panel daisy

    ohmtech-rdi/eurorack-blocks

    Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust

    259 parts410
  • 2 layers39.6 × 99.1 mmESP32-Eurorack Audio, the printed circuit board in 3D

    ESP32-Eurorack Audio

    ctag-fh-kiel/ctag-tbd

    CTAG TBD >>to be determined<< an extendible open source Eurorack sound module

    128 parts260
  • 4 layers121.9 × 109.2 mmPlinkyblack hwmidi jacks, the printed circuit board in 3D

    Plinkyblack hwmidi jacks

    plinkysynth/plinky_public

    a public release of the plinky sw and hw

    300 parts227
  • 2 layers58 × 110 mmVco core, the printed circuit board in 3D

    Vco core

    shmoergh/moduleur

    Fully analog DIY-friendly modular synth

    146 parts222
  • 2 layers37 × 113.9 mmVCO, the printed circuit board in 3D

    VCO

    nickajeglin/Eurorack-pcbs

    A collection of easy to solder DIY eurorack PCB's

    104 parts208
  • 2 layers111.3 × 106.4 mmSuper Sixteen v1, the printed circuit board in 3D

    Super Sixteen v1

    matthewcieplak/super-sixteen

    Code and schematics for the Super Sixteen Eurorack sequencer

    141 parts171
  • 2 layers85.1 × 62.2 mmMic extension board, the printed circuit board in 3D

    Mic extension board

    StoneRose35/cortexguitarfx

    guitar effects processor implemented on various arm cortex platforms

    75 parts146

Questions

How big is the Jelgen PCB?

It measures 100 × 45.5 mm and has 2 copper layers, 1.59 mm thick.

What parts does the Jelgen use?

24 parts, built around the TL072. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Jelgen KiCad files?

From the simonyiszk/sem-ultrahang repository on GitHub, at the commit this page was made from: the board is szendvicspanel/jelgen/jelgen.kicad_pcb and its schematic 40Mhzmodulator2/40Mhzmodulator2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Jelgen design in my own project?

Its repository states no licence, so its author keeps all rights: ask simonyiszk before reusing the design.