

Projektorosch
- Size
- 35.6 × 84.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 35
- Nets
- 45
- Pads
- 137
- Tracks, vias
- 232, 77
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 7 Dec 2021
- Updated
- 2 Jun 2024
Overview
Projektorosch is an open-source printed circuit board by simonyiszk, from the simonyiszk/SEM_ProjektoroSCH repository on GitHub, published under the MIT licence. It is a 2-layer board of 35.6 × 84.5 mm with 35 parts on 45 nets, routed with 232 tracks and 77 vias.
It is built around the ATMEGA328P-AU and MAX232N. Its parts include 10 capacitors, 9 resistors, 5 switches, 4 connectors and 2 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
2ATMEGA328P-AU
TQFP-32(7x7)-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 23 2KB 32KB 8 Bit AVR Built-in FLASH TQFP-32(7x7) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)MAX232N
PDIP-160℃~+70℃ 120Kbps 2 2 4.5V~5.5V Transceiver PDIP-16 RS232 ICs ROHSTexas InstrumentsRS232 ICs
README
README.mdRS232 Remote control
This project is created for wall mounted remote control of a projector's power settings and input selection.
Protocol basics:
RS232 in a nutshell: https://docs.google.com/document/d/1p7Dz5NA0ECTMzfMRH148HRk15ERgRvAex5ETr_D8jeQ/edit?usp=sharing
Project workflow:
- Schematic design
- Firmwware developent
- Case design
- Protoype testing
Project is made possible by Schönherz Elektronikai Műhely (SEM)
Parts
35| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 0.1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C3, C4, C5, C6, C7, C8 |
| 5 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5, R6, R7, R8, R9 |
| 4 | 150 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3, R4 |
| 4 | SW_SPST | Library:Marquardt 64250101 | SW1, SW2, SW3, SW4 |
| 2 | 22pF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C9, C10 |
| 1 | 16MHz | Crystal:Crystal_SMD_HC49-SD_HandSoldering | Y1 |
| 1 | 232-RX | TestPoint:TestPoint_Pad_D2.5mm | RS-RX |
| 1 | 232-TX | TestPoint:TestPoint_Pad_D2.5mm | RS-TX |
| 1 | 5V | TestPoint:TestPoint_Pad_D2.5mm | 5V |
| 1 | ATmega328P-A | Package_QFP:TQFP-32_7x7mm_P0.8mm | U2 |
| 1 | GND | TestPoint:TestPoint_Pad_D2.5mm | GND |
| 1 | ISP | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J4 |
| 1 | MAX232 | Package_SO:SOP-16_3.9x9.9mm_P1.27mm | U1 |
| 1 | Power | Connector_Phoenix_MC:PhoenixContact_MC_1,5_2-G-3.5_1x02_P3.50mm_Horizontal | J1 |
| 1 | Programmer | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J3 |
| 1 | RS232 | Connector_Phoenix_MC:PhoenixContact_MC_1,5_3-G-3.5_1x03_P3.50mm_Horizontal | J2 |
| 1 | Reset | Button_Switch_SMD:SW_Push_1P1T_NO_6x6mm_H9.5mm | SW5 |
Similar boards
- 2 layers

- 2 layers40 × 55 mm

- 2 layers132.1 × 45.7 mm

IPoS
peterheinrich/InternetOverSpaghetti
Transmitting IP packages over a pair of spaghetti thus demonstrating how media independent IP really is.
42 parts342 - 2 layers60.5 × 31.5 mm

Ps2-serial mouse adapter
necroware/ps2-serial-mouse-adapter
PS/2 to serial port mouse adapter
13 parts89GPL-3.0 - 2 layers79.7 × 35.1 mm

USB-2-232
LimeProgramming/USB-serial-mouse-adapter
Convert USB mouse to Serial mouse using Pi Pico
29 parts50MPL-2.0 - 2 layers148.3 × 116.6 mm

KiCAD RetroArduInput
RetroFuturisticEngineer/RetroARDUInput
Use USB Keyboards, Mice and Joysticks on PC/XT, PC/AT, Tandy 1000, Atari, Amiga, C64 and Apple
48 parts25LGPL-2.1 - 2 layers99.1 × 99.1 mm

6809v2
jbevren/6809v2
Code and design repository for the 6809v2 SBC: To be released at VCFMW 13
60 parts22 - 2 layers100 × 45 mm

Transcribe
cyberboy666/_transcribe_
midi to rs232 bridge - for performance control of old video mixers and switchers
28 parts20
Questions
How big is the Projektorosch PCB?
It measures 35.6 × 84.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Projektorosch use?
35 parts, built around the ATMEGA328P-AU and MAX232N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Projektorosch KiCad files?
From the simonyiszk/SEM_ProjektoroSCH repository on GitHub, at the commit this page was made from: the board is Schematic & Layout/projektorosch.kicad_pcb and its schematic Schematic & Layout/projektorosch.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Projektorosch design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).