SimonLou-Dev/medbox-pcbMedbox is an open-source printed circuit board by SimonLou-Dev, from the SimonLou-Dev/medbox-pcb repository on GitHub. It is a 2-layer board of 116.7 × 119.9 mm with 33 parts on 46 nets, routed with 237 tracks and 11 vias.
It is built around the ESP32-DEVKITC-VE and FQP27P06. Its parts include 10 resistors, 5 diodes, 3 capacitors, 2 transistors and 2 connectors. It belongs with the ESP32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | R10K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3, R6, R9, R11, R12, R13 |
| 2 | 100nF Céramique | Capacitor_THT:C_Disc_D6.0mm_W2.5mm_P5.00mm | C2, C3 |
| 1 | 100k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2 |
| 1 | 12.0 | Connector_BarrelJack:BarrelJack_GCT_DCJ200-10-A_Horizontal | J2 |
| 1 | 1N4148 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D3 |
| 1 | 2N2219 | Package_TO_SOT_THT:TO-39-3 | Q11 |
| 1 | Buzzer | library:buzzer | BZ1 |
| 1 | C_Polarized 220µ | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | C1 |
| 1 | Connecteur module RTC | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | M3 |
| 1 | Connecteur moteur pas a pas | Connector_JST:JST_PH_B6B-PH-K_1x06_P2.00mm_Vertical | J3 |
| 1 | Convertisseur 5V | library:MP1584EN | M2 |
| 1 | ESP32-DevKitC | PCM_Espressif:ESP32-DevKitC | U4 |
| 1 | FQP27P06 | Package_TO_SOT_THT:TO-220-3_Vertical | Q1 |
| 1 | LED | LED_THT:LED_D5.0mm | D7 |
| 1 | LED | LED_THT:LED_D3.0mm | D4 |
| 1 | Pololu_Breakout_A4988 | Module:Pololu_Breakout-16_15.2x20.3mm | A1 |
| 1 | Polyfuse | Fuse:Fuse_Littelfuse_395Series | F1 |
| 1 | R 120 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | R 500 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R40 |
| 1 | R 68 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R43 |
| 1 | SW_Push | Button_Switch_THT:SW_PUSH_6mm_H7.3mm | SW1 |
| 1 | TVS P6KE15A | Diode_SMD:D_SMB_Handsoldering | D2 |
| 1 | Zenner 1N4744A | Diode_THT:D_DO-41_SOD81_P7.62mm_Horizontal | D1 |
The 29 most common of 33 parts.
It measures 116.7 × 119.9 mm and has 2 copper layers, 1.6 mm thick.
33 parts, built around the ESP32-DEVKITC-VE and FQP27P06. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the SimonLou-Dev/medbox-pcb repository on GitHub, at the commit this page was made from: the board is medbox.kicad_pcb and its schematic alimentation.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask SimonLou-Dev before reusing the design.
mattronix/battery-board
KiCad hardware project for the battery-to-radio interface of an AN/PRC‑152(A) reproduction radio. It contains two small PCBs that mate through spring‑loaded pogo‑pin contacts, plus a shared custom KiCad footprint…
mattwach/portable_led_lamp
Contains firmware, schematics and 3D models for a LED lamp that can accept a wide range of voltages.
pietwauters/esp32_scoring_device_hardware
Hardware files for the scoring device
xHain-hackspace/xDoorPiHat
Schematics and Boardfiles for PiHat that opens and closes the xDoor
borisg912/3DNA
This project creates a flat cylindrical DNA model with: - Magnetic DNA bases with color-coded NeoPixel LEDs and unique resistor values for identification - Interactive base pairing game that validates correct DNA base…
d-diot/ESP8266-LolinV3-Lamp
A pcb for the NodeMCU Lolin V3 board with power management for a WS2812 LED strip
rbat05/SolarWeatherStation
Self-sustaining weather monitoring system with dual-node architecture.
