Skip to the content
2 layers14.2 × 10.1 mmBmi088-i2c breakout, the printed circuit board in 3D

Tiny I^2C breakout board for the Bosch BMI088 Inertial Measurement Unit

Size
14.2 × 10.1 mm
Copper layers
2
Thickness
1.6 mm
Parts
10
Nets
12
Pads
48
Tracks, vias
92, 11
Pours
1
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
8 Jun 2026
Updated
13 Jul 2026

Overview

Bmi088-i2c breakout is an open-source printed circuit board by simondlevy, from the simondlevy/bmi088-i2c-breakout repository on GitHub, published under the CC0-1.0 licence. It is a 2-layer board of 14.2 × 10.1 mm with 10 parts on 12 nets, routed with 92 tracks and 11 vias.

It is built around the BMI088. Its parts include 2 capacitors, 2 resistors, 2 connectors and 1 IC. It belongs with the interfaces and adapters boards of this library.

Main components

1

README

README.md

BMI088 I^2 Breakout

Tiny I2C breakout board for the Bosch BMI088 Inertial Measurement Unit. Available at tindie.com in standard through-hole and castellated versions.

Arduino library here.

Based on https://github.com/AeroStrike/BMI088-Breakout-Board.

Parts

10
QtyValueFootprintReferences
20.1μFCapacitor_SMD:C_0201_0603MetricC1, C2
21.5kΩResistor_SMD:R_0201_0603MetricR1, R2
2Conn_01x04_SocketConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ1, J2
1BMI088Package_LGA:Bosch_LGA-16_4.5x3mm_P0.5mm_LayoutBorder7x1y_ClockwisePinNumberingU1
1Jumper_1_OpenCapacitor_SMD:C_0201_0603MetricJP1
1Jumper_2_OpenCapacitor_SMD:C_0201_0603MetricJP2
1LOGOLOGOG***

Similar boards

  • 4 layers100.1 × 60.2 mmHades, the printed circuit board in 3D

    Hades

    pms67/HadesFCS

    Complete flight control system designed from scratch. Hardware designed with KiCad.

    215 parts1kBSD-3-Clause
  • 4 layers55 × 55 mmRBoard, the printed circuit board in 3D

    RBoard

    pms67/LittleBrain-STM32F4-Sensorboard

    STM32F4-based PCB interfacing with a variety of sensors.

    90 parts339
  • 8 layers50 × 50 mmOmodri laas, the printed circuit board in 3D

    Omodri laas

    open-dynamic-robot-initiative/open-motor-driver-initiative

    Open-source drive for brushless motors, following the open dynamic robot initiative

    265 parts122BSD-3-Clause
  • 4 layers99.8 × 94.6 mmOresat adcs card, the printed circuit board in 3D

    Oresat adcs card

    oresat/oresat-adcs-hardware

    Controller PCB for OreSat reaction wheels, magnetorquers, IMU, and magnetometers

    598 parts21GPL-2.0
  • 4 layers70.1 × 50.9 mmFlight computer, the printed circuit board in 3D

    Flight computer

    Terrapin-Rocket-Team/SRAD-Avionics

    Code and PCBs for the avionics subteam for the SRAD flight computer and side projects

    121 parts17
  • 4 layers62.8 × 97.5 mmOceanAI, the printed circuit board in 3D

    OceanAI

    daniel360kim/OceanAI

    A robotic and software orientated ocean development.

    124 parts14MIT
  • 4 layers30.5 × 82.6 mmCircuit board design, the printed circuit board in 3D

    Circuit board design

    ImperialSpaceSociety/Project-Mach-1

    This is the code and hardware designs for the high powered rocketry project at the Imperial College Space Society

    89 parts12
  • 4 layers64 × 60 mmDronemagnav, the printed circuit board in 3D

    Dronemagnav

    ajisrawi/dronemagnav

    Magnetic-anomaly navigation (MagNav) board + firmware for drones: ESP32-S3, BMI088, LIS3MDL, BMP280, u-blox GNSS, WDMAM map matching, particle filter, MAVLink, phone route planner. Proprietary - all rights reserved.

    60 parts11

Questions

How big is the Bmi088-i2c breakout PCB?

It measures 14.2 × 10.1 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Bmi088-i2c breakout use?

10 parts, built around the BMI088. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Bmi088-i2c breakout KiCad files?

From the simondlevy/bmi088-i2c-breakout repository on GitHub, at the commit this page was made from: the board is castellated/bmi088-i2c-breakout.kicad_pcb and its schematic castellated/bmi088-i2c-breakout.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Bmi088-i2c breakout design in my own project?

Its repository publishes it under the CC0-1.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).