6 layers111 × 111 mm
Led panel
antmicro/programmable-led-panel
LED matrix controlled with iCE40 FPGA or RP2040 MCU for benchmarking and integration of video systems
315 parts2Apache-2.0
4 layers41.9 × 20.3 mm
ICE40UP Development Board
SimonBrenninger/ICE40UP-Development-Boarda small, entry-level FPGA Development Board
- Size
- 41.9 × 20.3 mm
- Copper layers
- 4
- Thickness
- 1.61 mm
- Parts
- 63
- Nets
- 64
- Pads
- 279
- Tracks, vias
- 759, 96
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 4 Mar 2023
- Updated
- 3 Apr 2024
Overview
ICE40UP Development Board is an open-source printed circuit board by SimonBrenninger, from the SimonBrenninger/ICE40UP-Development-Board repository on GitHub, published under the GPL-3.0 licence. It is a 4-layer board of 41.9 × 20.3 mm with 63 parts on 64 nets, routed with 759 tracks and 96 vias.
It is built around the ICE40UP5K-SG48ITR50, W25Q128JVSIQ and USB4105-GF-A, with the USBLC6-2P6 among its other parts. Its parts include 22 capacitors, 20 resistors, 5 crystals, 2 switches and 1 fuse. It belongs with the microcontroller boards and fPGA and programmable logic boards and the FPGA and CPLD boards of this library.
Main components
4
ICE40UP5K-SG48ITR50
QFN-48QFN-48 Programmable Logic Device (CPLDs/FPGAs) ROHSLatticeProgrammable Logic Device (CPLDs/FPGAs)
W25Q128JVSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 120ms@(32KB) 128Mbit 133MHz 1uA 2.7V~3.6V 20 Years 3ms Power-on reset、Hardware write protection、Software write protection、Write enable latch、Absolute write protection SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASH
USB4105-GF-A
SMD-40℃~+85℃ 1 12P 48V 5A Black Female Surface Mount, Right Angle Type-C USB 2.0 SMD USB Connectors ROHSGlobal Connector Technology (GCT)USB Connectors
USBLC6-2P6
SOT-666-6-40℃~+125℃ 150nA 17V 2 3.5pF 5.25V 5A@8/20us 6V ESD IEC 61000-4-2 Unidirectional SOT-666-6 ESD and Surge Protection (TVS/ESD) ROHSSTMicroelectronicsESD And Surge Protection (TVS/ESD)
README
README.mdICE40UP Development Board
is a small formfactor, entry-level FPGA development board using a Lattice Semiconductor ultra low power chip.
ICE40UP Features
Board Features
Parts
63| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 100n | Capacitor_SMD:C_0402_1005Metric | C1, C7, C8, C14, C18, C19, C21, C22 |
| 8 | 10k | Resistor_SMD:R_0402_1005Metric | R1, R3, R4, R7, R8, R9, R13, R14 |
| 7 | 1u | Capacitor_SMD:C_0402_1005Metric | C6, C9, C10, C11, C12, C13, C17 |
| 3 | 10n | Capacitor_SMD:C_0402_1005Metric | C15, C16, C20 |
| 3 | 10u | Capacitor_SMD:C_0402_1005Metric | C2, C3, C5 |
| 3 | 470R | Resistor_SMD:R_0402_1005Metric | R15, R16, R17 |
| 2 | 22R | Resistor_SMD:R_0402_1005Metric | R11, R12 |
| 2 | 5k11 | Resistor_SMD:R_0402_1005Metric | R5, R6 |
| 2 | Conn_01x16 | Connector_PinHeader_2.54mm:PinHeader_1x16_P2.54mm_Vertical | X2, X3 |
| 1 | 100R | Resistor_SMD:R_0402_1005Metric | R2 |
| 1 | 100u | Capacitor_SMD:C_0805_2012Metric | C4 |
| 1 | 1V2EN | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
| 1 | 1k | Resistor_SMD:R_0402_1005Metric | R18 |
| 1 | 1k5 | Resistor_SMD:R_0402_1005Metric | R10 |
| 1 | 200mA | Fuse:Fuse_0805_2012Metric | F1 |
| 1 | 2k2 | Resistor_SMD:R_0402_1005Metric | R20 |
| 1 | 33k | Resistor_SMD:R_0402_1005Metric | R19 |
| 1 | 3V3EN | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP2 |
| 1 | 48MHz | Oscillator:Oscillator_SMD_Abracon_ASE-4Pin_3.2x2.5mm | Y1 |
| 1 | APS6404L | Package_SON:SON-8-1EP_3x2mm_P0.5mm_EP1.4x1.6mm | V2 |
| 1 | CDONE | LED_SMD:LED_0603_1608Metric | V9 |
| 1 | CONF | myLib:SW_SPST_EVQP2 | S1 |
| 1 | CONF | LED_SMD:LED_0603_1608Metric | V8 |
| 1 | FerriteBead_Small | Inductor_SMD:L_0603_1608Metric | FB1 |
| 1 | ICE40UP5K-SG48ITR | Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.6x5.6mm | V5 |
| 1 | LED_RGBA | myLib:CREE_UHD111A | V7 |
| 1 | PWR | LED_SMD:LED_0603_1608Metric | V6 |
| 1 | RST | myLib:SW_SPST_EVQP2 | S2 |
| 1 | TLV7111233DSER | Package_SON:WSON-6_1.5x1.5mm_P0.5mm | V3 |
| 1 | Tag-Connect | Connector:Tag-Connect_TC2050-IDC-FP_2x05_P1.27mm_Vertical | X4 |
| 1 | USB4105-GF-A | Connector_USB:USB_C_Receptacle_G-Switch_GT-USB-7010ASV | X1 |
| 1 | USBLC6-2P6 | Package_TO_SOT_SMD:SOT-666 | V4 |
| 1 | W25Q128JVS | Package_SO:SOIC-8_5.23x5.23mm_P1.27mm | V1 |
The 62 most common of 63 parts.
Similar boards
- 4 layers50.8 × 20.3 mm
Iceblink
bminch/iceBlinkPico
Design files and SystemVerilog examples for iceBlinkPico, a small breadboard-friendly iCE40UP5K FPGA dev board
57 parts2BSD-2-Clause - 4 layers28.1 × 13.2 mm
- 2 layers32.2 × 52.2 mm
ICE40UP5Kdev
redhotchili0909/engr3430-eclectronics
Through a series of projects, students will learn all aspects of printed-circuit board (PCB) design at the prototype scale of manufacturing, including electronic circuit/system design, component selection, schematic…
53 partsMIT - 2 layers21.8 × 51.9 mm
- 2 layers
Pcb dev fpga iCE40
shishir-dey/pcb-dev-fpga-iCE40
A 2 layer development board with a Lattice Semiconductor ICE40UP5K-SG48ITR FPGA. Made with KiCad
57 partsMIT - 4 layers95 × 67 mm
- 4 layers48 × 26.2 mm
Questions
How big is the ICE40UP Development Board PCB?
It measures 41.9 × 20.3 mm and has 4 copper layers, 1.61 mm thick.
What parts does the ICE40UP Development Board use?
63 parts, built around the ICE40UP5K-SG48ITR50, W25Q128JVSIQ, USB4105-GF-A and USBLC6-2P6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ICE40UP Development Board KiCad files?
From the SimonBrenninger/ICE40UP-Development-Board repository on GitHub, at the commit this page was made from: the board is board/ICE40UP-Development-Board.kicad_pcb and its schematic board/ICE40UP-Development-Board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ICE40UP Development Board design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).