FOSSTracker
Hardware Design of FleetVR
- Size
- 28.1 × 13.2 mm
- Copper layers
- 4
- Thickness
- 4.69 mm
- Parts
- 50
- Nets
- 96
- Pads
- 312
- Tracks, vias
- 489, 161
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 21 May 2022
- Updated
- 22 May 2022
Overview
FOSSTracker is an open-source printed circuit board by CyberSiliconForest, from the CyberSiliconForest/FleetVR-HW repository on GitHub. It is a 4-layer board of 28.1 × 13.2 mm with 50 parts on 96 nets, routed with 489 tracks and 161 vias.
It is built around the ICE40UP5K-SG48ITR50, ESP32-C3-MINI-1-N4 and TS4231, with the BPW34S-Z, DSC1001CI5-024.0000 and USB4105-GF-A among its other parts. Its parts include 22 capacitors, 8 resistors, 8 ICs, 7 diodes and 4 connectors. It belongs with the ESP32, RISC-V and FPGA and CPLD boards of this library.
Main components
6ICE40UP5K-SG48ITR50
QFN-48QFN-48 Programmable Logic Device (CPLDs/FPGAs) ROHSLatticeProgrammable Logic Device (CPLDs/FPGAs)ESP32-C3-MINI-1-N4
SMD,16.6x13.2mm-40℃~+85℃ -98dBm 20.5dBm 350mA 3V~3.6V 84mA Integrated temperature sensor、Integrated antenna、Built-in watchdog On-board PCB Antenna SPI、UART、I2C、I2S、USB Transceiver SMD,16.6x13.2mm WiFi Modules ROHSEspressif SystemsRF ModulesTS4231
WLCSP-9_1.66x1.66x0.50PWLCSP-9(1.66x1.66) New Arrivals ROHSTriad SemiconductorUncategorisedBPW34S-Z
SMD,6.2x3.7mm-40℃~+100℃ 150mW 2nA 32V 420nm~1120nm 60° 920nm SMD,6.2x3.7mm Photodiodes ROHSOSRAM Opto SemiconPhotodiodesDSC1001CI5-024.0000
SMD3225-4P-40℃~+85℃ 1.8V~3.3V 24MHz 6.3mA CMOS ±10ppm SMD3225-4P Programmable Oscillators ROHSMicrochip TechnologyProgrammable OscillatorsUSB4105-GF-A
SMD-40℃~+85℃ 1 12P 48V 5A Black Female Surface Mount, Right Angle Type-C USB 2.0 SMD USB Connectors ROHSGlobal Connector Technology (GCT)USB Connectors
README
README.mdFleetVR Hardware Design
Abstract
License
Most hardware designes are released under CERN OHL S v2.
Refer REUSE description for further information
Parts
50| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 1u | Capacitor_SMD:C_0603_1608Metric | C1, C3, C4, C7, C17, C19, C21, C23 |
| 6 | 0.1u | Capacitor_SMD:C_0603_1608Metric | C5, C6, C8, C9, C10, C11 |
| 6 | 100n | Capacitor_SMD:C_0603_1608Metric | C2, C13, C16, C18, C20, C22 |
| 4 | 15k | Resistor_SMD:R_0603_1608Metric | R6, R7, R8, R9 |
| 4 | BPW_34_S-Z | Library:DIO_BPW_34_S-Z | D5, D6, D7, D8 |
| 4 | TS4231 | Library:TS4231 WLCSP9 | U3, U4, U5, U6 |
| 3 | 1-2328702-0 | SamacSys_Parts:123287020 | J2, J3, J4 |
| 3 | 220 | Resistor_SMD:R_0603_1608Metric | R1, R2, R3 |
| 3 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1, D2, D3 |
| 2 | 10u | Capacitor_SMD:C_0603_1608Metric | C12, C15 |
| 1 | 100 | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | DSC1001CI5-024.0000 | SamacSys_Parts:DSC1001CI50240000 | Y1 |
| 1 | ESP32-C3-MINI-1-N4 | Library:XCVR_ESP32-C3-MINI-1-N4 | U2 |
| 1 | ICE40UP5K-SG48ITR | Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.6x5.6mm | U1 |
| 1 | TLV70312DBVR | SamacSys_Parts:SOT95P280X145-5N | IC3 |
| 1 | TLV70330DBVR | SamacSys_Parts:SOT95P280X145-5N | IC2 |
| 1 | USB4105-GF-A | Library:USB4105-GF-A | J1 |
More from CyberSiliconForest/FleetVR-HW
1- 2 layers11.6 × 25.3 mm

Similar boards
- 2 layers120 × 80 mm

Spikeling v3.2
OpenSourceNeuro/Spikeling
A hardware implementation of spiking neurons for neuroscience teaching and outreach
233 parts21GPL-3.0 - 4 layers100 × 174.6 mm

Rf switchboard
Erhannis/rf_switchboard
KiCAD pcb; whole heap of rf-related modules so I can figure out what works and how.
467 parts - 2 layers99.8 × 25.7 mm

Sideplatediode
hstarmans/firestarter
Kicad design files for prism laser direct imager using up5k FPGA and ESP32
7 parts13 - 4 layers30 × 48 mm

Esp32 bpw34s
HeyPCB/esp32-sensors-2
ESP32-S3 boards, one sensor each: KiCad 10, JLCPCB-ready, CERN-OHL-S-2.0
22 partsCERN-OHL-S-2.0 - 2 layers58 × 38.3 mm

Esp32-caliper
Mew463/esp32-caliper
It features a built in 150mAh battery and a USB C interface for charging/uploading code.
44 parts59 - 4 layers79.8 × 51.8 mm

- 6 layers111 × 111 mm

Led panel
antmicro/programmable-led-panel
LED matrix controlled with iCE40 FPGA or RP2040 MCU for benchmarking and integration of video systems
315 parts2Apache-2.0 - 4 layers50.8 × 20.3 mm

Iceblink
bminch/iceBlinkPico
Design files and SystemVerilog examples for iceBlinkPico, a small breadboard-friendly iCE40UP5K FPGA dev board
57 parts2BSD-2-Clause
Questions
How big is the FOSSTracker PCB?
It measures 28.1 × 13.2 mm and has 4 copper layers, 4.69 mm thick.
What parts does the FOSSTracker use?
50 parts, built around the ICE40UP5K-SG48ITR50, ESP32-C3-MINI-1-N4, TS4231 and BPW34S-Z. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the FOSSTracker KiCad files?
From the CyberSiliconForest/FleetVR-HW repository on GitHub, at the commit this page was made from: the board is FOSSTracker/FOSSTracker.kicad_pcb and its schematic FOSSTracker/CenterSensor.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the FOSSTracker design in my own project?
Its repository states no licence, so its author keeps all rights: ask CyberSiliconForest before reusing the design.