

Com board 01
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 14
- Nets
- 122
- Pads
- 258
- Tracks, vias
- 111, 14
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 30 May 2024
- Updated
- 19 Mar 2026
Overview
Com board 01 is an open-source printed circuit board by sim82, from the sim82/6502_sbc repository on GitHub, published under the MIT licence. It is a 2-layer board with 14 parts on 122 nets, routed with 111 tracks and 14 vias.
It is built around the 74HC595, 74HCT574D and 74AHC1G32GW, with the 74LS32SC and TL28L92FR among its other parts. Its parts include 8 ICs and 6 connectors.
Main components
574HC595
SOP-16-40℃~+85℃ 1 100ns@5V,50pF 10MHz 2V~6V 74HC 8 Serial-to-Serial or Parallel Tri-State SOP-16 Shift Registers ROHSGRShift Registers74HCT574D
SO-20-300mil-40℃~+125℃ 1 18ns@4.5V,50pF 3.5pF 3ns 4.5V~5.5V 5ns 69MHz 6mA 6mA 74HCT Series 8 8uA D-Type Rising Edge Tri-State SOIC-20-300mil Flip Flops ROHSNexperiaFlip Flops74AHC1G32GW
SOT-353-40℃~+125℃ 1 1.5V~3.85V 1.9V、2.9V、3.94V、4.4V 100mV、100mV、100mV、550mV 1uA 2 2V~5.5V 500mV~1.65V 7.5ns@5V,50pF 74AHC Series 8mA 8mA OR Gate Overvoltage-tolerant input SOT-353 Logic Gates ROHSNexperiaLogic Gates74LS32SC
-- Logic Gates ROHSTexas InstrumentsLogic GatesTL28L92FR
LQFP-44(10x10)LQFP-44(10x10) UART ROHSTexas InstrumentsUART
Parts
14| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 74HC595 | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U1, U2 |
| 2 | 74HCT574 | Package_SO:SO-20_12.8x7.5mm_P1.27mm | U6, U7 |
| 2 | Conn_01x09 | Connector_PinSocket_2.54mm:PinSocket_1x09_P2.54mm_Vertical | J11, J12 |
| 1 | 74AHC1G32 | Package_TO_SOT_SMD:SOT-23-5_HandSoldering | U15 |
| 1 | 74LS138 | Package_SO:SO-16_3.9x9.9mm_P1.27mm | U5 |
| 1 | 74LS32 | Package_SO:SO-14_3.9x8.65mm_P1.27mm | U11 |
| 1 | Conn_01x08_Socket | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J4 |
| 1 | Conn_01x09_Socket | Connector_PinSocket_2.54mm:PinSocket_1x09_P2.54mm_Vertical | J3 |
| 1 | DIN41612_02x32_AC | Connector_DIN:DIN41612_C_2x32_Male_Horizontal_THT | J1 |
| 1 | TL28L92FR | Package_QFP:MQFP-44_10x10mm_P0.8mm | U10 |
| 1 | UART | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J5 |
More from sim82/6502_sbc
9- 2 layers99.1 × 94.2 mm

- 4 layers80.9 × 100.6 mm

- 2 layers119.4 × 91.4 mm

- 2 layers59.4 × 65.5 mm

- 4 layers101.6 × 70.1 mm

- 2 layers99.1 × 34.5 mm

- 2 layers70.6 × 26.9 mm

- 2 layers120.6 × 92.7 mm

- 2 layers120.6 × 92.7 mm

Similar boards
- 2 layers162.2 × 134.6 mm

- 2 layers235 × 176.5 mm

Cpu
Edgeworth/memepu
cmake -DUSEAFL=yes -DCMAKEBUILDTYPE=Release $PFX/verymeme AFLSKIPCPUFREQ=yes AFLPRELOAD=/usr/local/lib/afl/libdislocator.so \ afl-fuzz -m 1024M -i $PFX/verymeme/testdata/memelang/parsing -o memelangfuzz \ -x…
286 parts9GPL-3.0 - 2 layers137 × 101.1 mm

Z80 board1
alexfreed58/z80-CPM-board-with-smart-i-o
This is yet another retro computer running CPM on an actual Z80 CPU with a twist. Instead of using a traditional UART for communications, it uses a RPi pico module that is no bigger and no more expensive than a UART.
48 parts2MIT - 4 layers87 × 65.7 mm

- 2 layers127 × 88.9 mm

Vga
rustbox/cuddly-robot
flash me with make generate && minipro -p ATF22V10C -w GAL22V10fifobuf.jed
39 parts - 4 layers219 × 108.5 mm

Z80DevBoard
gianluca-rainis/Z80DevBoard
An advanced development board for the Z80 microprocessor, powered by an RP2040.
182 parts7CERN-OHL-S-2.0 - 2 layers301 × 262.6 mm

1 Sistema FINAL
felipesantiagoach-ops/cdp1802-8bit-computer
8-bit microcomputer based on the RCA CDP1802, the first CMOS microprocessor. Three stages designed in KiCad: two built and tested (assembly programs, UART, Tiny BASIC, Elf/OS) and a final design with an ADC, I²C/SPI…
207 parts - 2 layers138 × 96.9 mm

Questions
What parts does the Com board 01 use?
14 parts, built around the 74HC595, 74HCT574D, 74AHC1G32GW and 74LS32SC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Com board 01 KiCad files?
From the sim82/6502_sbc repository on GitHub, at the commit this page was made from: the board is kicad/com_board_01/com_board_01.kicad_pcb and its schematic kicad/backplane/backplane.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Com board 01 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).