Skip to the content
2 layers138.4 × 91.2 mmKeyboard draft5, the printed circuit board in 3D

a wireless split keyboard with a horizontal encoder, trackpoint support and custom layout

Size
138.4 × 91.2 mm
Copper layers
2
Thickness
1.6 mm
Parts
55
Nets
44
Pads
385
Tracks, vias
634, 100
Pours
22
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
23 Sep 2025
Updated
23 Sep 2025

Overview

Keyboard draft5 is an open-source printed circuit board by sillybanaja, from the sillybanaja/sillykeyboard repository on GitHub. It is a 2-layer board of 138.4 × 91.2 mm with 55 parts on 44 nets, routed with 634 tracks and 100 vias.

Its parts include 20 switches, 18 diodes, 3 resistors, 2 connectors and 1 capacitor. It belongs with the keyboards and input boards and the nRF52 and nRF5x boards of this library.

README

README.md

Started January 2024...

I did a 2 month sprint of working on this project back then, so forgive me being crusty on the details.

fully from scratch custom ergo split keyboard, rotary encoder on each side, optional lenovo trackpoint which removes the need to use a mouse. Supports wired and wireless with half a year or more of battery life. For only around $100 buckaroos..

done4

Creating the pcb

version 1

In my first design I was getting use to kicad while thinking through different ideas. At this stage i was still not sure which microboard to use or what method to power the keyboard. Since i wanted it to be wireless. My first designs main idea was to throw in this micro controller board, then build of another persons code who did a similar thing (i cant find the link) and then go ahead and add trackpoint support and encoder support.

version 2

In my second design I figured out the strat and put the supermini boards in since they are cheap and are widley supported with software like zmk etc. As you can tell i changed the entire design testing with cardboard cutouts where my fingers should land. As you can see i added the rolling encoder to the top left pinky area. Also you can see the outlines of where i was thinking the battery and trackpoint would fit.

version 3

In version 3 i had the general layout and was testing where the trackpoint hole and different things where gonna go. Still havent wired it up though. But i am feeling this design.

version 4

In this version i added the other components like the reset button etc. I tried to wire it up and let me tell you its a serious art form...

version 5

Here cleaning up the wiring and throwing in little details. Sent this one out and it worked perfect...

Shipping out everything

pcbs in person

They look really nice. I decided to get black for optimization purposes...... (the rust looking stuff is just the reflection of my red shirt)

other components

If you want a list of what i bought look at the bom.txt.

Present

I put together this mockup and got it working with zmk.. But i kinda lost steam to keep going since most of the "hard" stuff is over. Still need to design a case and put the encoder and trackpoint in.. But thats practicly all of it.

done3

THANKS FOR READING. feel free to try and create this with no documentation or just build of what i have already made..

Parts

55
QtyValueFootprintReferences
18D_Smallmylib:D_0603_1608Metric_ReversableD1, D2, D3, D4, D5, D6, D7, D10, D11, D12, D13, D14, D15, D16, D17, D18 +2
17SW_PushPCM_Switch_Keyboard_Hotswap_Kailh:SW_Hotswap_Kailh_Choc_V1_1.00u_ReversableSW4, SW5, SW6, SW7, SW8, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18, SW19, SW20 +1
7, , , , , ,
24.7kResistor_SMD:R_0603_1608MetricR1, R2
2LOGOLOGOG***, G***
1clipboard:53909925-5cd0-4ddb-af66-be0e0de876a0
1100kResistor_SMD:R_0603_1608MetricR3
12.2uFCapacitor_SMD:C_0603_1608MetricC1
1Conn_01x020781710002:MOLEX_0781710002J2
1Conn_01x05footprints:CON_781710005J1
1RotaryEncoder_Switchswitch:EVQWGD001SW3
1SW_DPST_x2Button_Switch_SMD:SW_SPDT_PCM12SW2
1SW_PushButton_Switch_SMD:SW_Push_SPST_NO_Alps_SKRKSW1
1SuperMini NRF52840promicro:SuperMini NRF52840_NO3U1

Similar boards

  • 2 layers229.5 × 95.1 mmSweep high, the printed circuit board in 3D

    Sweep high

    davidphilipbarr/Sweep

    Sweep - a small promicro based keyboard inspired by the Ferris.

    55 parts2.1k
  • 2 layers370 × 11 mmDaylight Disco XXL, the printed circuit board in 3D

    Daylight Disco XXL

    VoronDesign/Voron-Hardware

    Cool Hardware designed by the Voron Design group

    55 parts1.1kGPL-3.0
  • 2 layers370 × 10 mmE3NGLEDstick, the printed circuit board in 3D

    E3NGLEDstick

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    55 parts915
  • 2 layers139.3 × 94.8 mmFlake, the printed circuit board in 3D

    Flake

    lever-tech/flake

    An open-source, wireless, split ergonomic keyboard designed to be productive, healthy, and enjoyable. [formerly Anywhy Flake]

    55 parts531CERN-OHL-W-2.0
  • 2 layers237.5 × 102.9 mmMemory, the printed circuit board in 3D

    Memory

    jes/scamp-cpu

    A homebrew 16-bit CPU with a homebrew Unix-like-ish operating system.

    55 parts301Unlicense
  • 2 layers60.6 × 24.1 mmBlep hackerboard, the printed circuit board in 3D

    Blep hackerboard

    CRImier/MyKiCad

    My KiCad boards. Can't be bothered uploading individually anymore, so here you go.

    55 parts253GPL-3.0
  • 2 layers100 × 96.5 mmKeyboard ch552-36-lhs, the printed circuit board in 3D

    Keyboard ch552-36-lhs

    rgoulter/keyboard-labs

    Repo with my PCB designs and keyboard firmware

    55 parts236
  • 2 layers190.5 × 85.7 mmDissatisfaction30, the printed circuit board in 3D

    Dissatisfaction30

    dcpedit/dissatisfaction30

    To get the PCB manufactured, upload dissat-pcb.zip to JLCPCB, select your desired PCB color while keeping all the other default options, and place your order (minimum 5).

    55 parts147CC-BY-4.0

Questions

How big is the Keyboard draft5 PCB?

It measures 138.4 × 91.2 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Keyboard draft5 use?

55 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Keyboard draft5 KiCad files?

From the sillybanaja/sillykeyboard repository on GitHub, at the commit this page was made from: the board is hardware/keyboard-draft5.kicad_pcb and its schematic hardware/keyboard-draft5.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Keyboard draft5 design in my own project?

Its repository states no licence, so its author keeps all rights: ask sillybanaja before reusing the design.