2 layers84.2 × 49.8 mm
Esp32-skimmer detector pro
planmarks/Skimmer-Detector-PRO
ESP32 Based Wireless Skimmer Detector
67 parts1
2 layers
Riscy
siliwho/Riscy1A development board based on risc5
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 36
- Nets
- 43
- Pads
- 182
- Tracks, vias
- 407, 15
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 26 Jan 2025
- Updated
- 5 Dec 2025
Overview
Riscy is an open-source printed circuit board by siliwho, from the siliwho/Riscy repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board with 36 parts on 43 nets, routed with 407 tracks and 15 vias.
It is built around the ESP32-C3-WROOM-02-H4, FT231XS-R and AMS1117-3.3, with the MMBT2222A among its other parts. Its parts include 12 resistors, 10 capacitors, 3 ICs, 3 connectors and 2 diodes. It belongs with the microcontroller boards boards and the ESP32 and RISC-V boards of this library.
Main components
4
ESP32-C3-WROOM-02-H4
SMD,20x18mm-105dBm -40℃~+105℃ 2.4GHz 20.5dBm 345mA 3V~3.6V 82mA Bluetooth5.0 ESP32-C3 On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD,20x18mm WiFi Modules ROHSEspressif SystemsWiFi Modules
FT231XS-R
SSOP-20-150mil-40℃~+85℃ 125uA 5V 8.4mA USB 2.0 USB to UART SSOP-20-150mil USB Converters ROHSFTDIUSB Converters
AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
MMBT2222A
SOT-23-55℃~+150℃ 1 NPN 100 100nA 1V 300MHz 300mW 40V 600mA 6V NPN Standalone SOT-23 Bipolar (BJT) ROHShongjiachengBipolar (BJT)
README
README.mdRISCY
I am bulding a devboard using esp32-c3 for risc 5 architechture.
Module
- esp32-c3 02 :-
https://robu.in/product/espressif-esp32-c3-wroom-02-n4-module/
USB slave to UART
- usb to uart link x1:-
https://robu.in/product/ft231xs-usb-to-full-handshake-uart-ic/ - usb c 3.1 female buy link x1 :-
https://sharvielectronics.com/product/16-pin-c-type-usb-connector-smd-package/
Automatic Bootloader mechanism
- here is the blog covering this topic:
https://medium.com/@kazutaka.yoshinaga/esp32-understanding-the-automatic-boot-loader-mechanism-and-truth-table-68c4dcfd081b - BJT link x2 :-
https://robu.in/product/mmbt2222-npn-transistor-pack-of-15/
Reset and Boot buttons
tact-switch-tvbp06-6-0x3-5mm
- 4 pin tactile switch x2 :-
https://sharvielectronics.com/product/6x6x6mm-4-pin-smd-push-button-switch-black-smd-package/?srsltid=AfmBOoqkUntN9e5Ccbb3nGcXEwSu-7Jxecq2lp09xIixMuHtoX-pbkdE
Programable LED
- link to buy x1 each:-
https://robu.in/product/1206-surface-mount-led-white-50-pcs/https://robu.in/product/0805-surface-mount-led-green-50-pcs/https://robu.in/product/1210-surface-mount-led-red-50-pcs/
Voltage Regulator
- link to buy x1:-
https://robu.in/product/ams1117-3-3v-1a-sot-223-voltage-regulator-ic-pack-of-5-ics/?gad_source=1&gclid=Cj0KCQiAhvK8BhDfARIsABsPy4iSbVYHEwlP9KEBU2B-lCpn-yx6If_Pfp03lKlFopRlRfcGBhBD0BAaAo5wEALw_wcB
Schematics
Capacitors
-
47 pf (1206) x2
https://robu.in/product/1206cg470j102nt-fh-smd-multilayer-ceramic-capacitor-47-pf-1k-v-1206-3216-metric-%C2%B1-5-c0g-np0/ -
1uf (0805) x1
https://robu.in/product/1uf-1000nf-50v-capacitor-0805-smd-package-pack-of-10/?gad_source=1&gclid=CjwKCAiAqfe8BhBwEiwAsne6gRW89rA8-Swm024kPMmwT7c9DuGJLPZeQFsVlMFR-OqpyiHtYQ1T4hoC8iMQAvD_BwE -
0.1uf (0603) x4
https://robu.in/product/0-1uf-capacitor-smdc-0603/?gad_source=1&gclid=CjwKCAiAqfe8BhBwEiwAsne6gWn9uzvhnW72vBLiLfLgH6g2IBu4aXkYyNnVniyPnGsfjDwM305cGxoC8nkQAvD_BwE -
10uf (0805) x1
https://robu.in/product/10uf-10000nf-25-v-capacitor-0805-smd-package-pack-of-10/?gad_source=1&gclid=CjwKCAiAqfe8BhBwEiwAsne6gSNCd9WapUePWtNVtayLgPHIMiImB_SQO5EiwIjBxiPgrBeaZvYwxxoCuBgQAvD_BwE -
22uf (0805) x2
https://robu.in/product/yageo-22uf-25v-electrolytic-capacitor-5-x-11mm/?gad_source=1&gclid=CjwKCAiAqfe8BhBwEiwAsne6gWyHPdNbx2DJMTqJMZTA1229QODbWIoOOmdcEkEg3BOqxQL2i1x2ehoCttgQAvD_BwE
Resistors
- 10k (1206) x3
https://robu.in/product/yageo-10k-ohm-1-4w-1206-surface-mount-chip-resistor-pack-of-50/?gad_source=1&gclid=CjwKCAiAqfe8BhBwEiwAsne6gZWv9w5e9PMNmgXxTNiYDh80E5rCTzmXLJArUMoy2vFAzwSFBDGwHRoCKAUQAvD_BwE - 2k (0603) x1
https://robu.in/product/rc0603fr-072kl-yageo-res-thick-film-0603-2k-ohm-1-0-1w1-10w-%C2%B1100ppm-c-pad-smd-t-r/?gad_source=1&gclid=CjwKCAiAqfe8BhBwEiwAsne6gWDPpM3FZ68ny4cKiBX4H2pzpEQgQKrVqhm_9OjcrVDXVOdlWZfx0RoCqCEQAvD_BwE - 5.1k (1206) x1
https://robu.in/product/rc1206fr-075k1l-yageo-res-thick-film-1206-5-1k-ohm-1-0-25w1-4w-%C2%B1100ppm-c-pad-smd-t-r/?gad_source=1&gclid=CjwKCAiAqfe8BhBwEiwAsne6gRqt6TucMgg01SNZ5VyACSfpWdVqewY8vab5gWvl6FbrrHuYexlRzxoCukMQAvD_BwE - 22k (1206) x3
https://robu.in/product/22k-ohm-1-4w-1206-surface-mount-chip-resistor-pack-of-100/?gad_source=1&gclid=CjwKCAiAqfe8BhBwEiwAsne6gS6hBlgg2iVJp858rXo21lLIIVadU-xK-fzI3kwSm3MWMYYFXDwUsBoCjh4QAvD_BwE - 27 (0805) x2
https://robu.in/product/rc0805fr-0727rl-yageo-smd-chip-resistor-27-ohm-%C2%B1-1-125-mw-0805-2012-metric-thick-film-general-purpose/ - 1 (1206) x2
https://robu.in/product/1-ohm-1-4w-1206-surface-mount-chip-resistor-pack-of-100/?gad_source=1&gclid=CjwKCAiAqfe8BhBwEiwAsne6gYzLEAPAPqUGiqb02MYLoErwIDmVYmgq0LpQvgXpQUw6lDAnweQhTRoCmqYQAvD_BwE
PCB editor
3D view
Parts
36| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 0.1u | Capacitor_SMD:C_0603_1608Metric | C2, C4, C7, C11 |
| 3 | 10k | Resistor_SMD:R_1206_3216Metric | R1, R10, R11 |
| 3 | 22k | Resistor_SMD:R_1206_3216Metric | R4, R5, R12 |
| 2 | 1 | Resistor_SMD:R_1206_3216Metric | R6, R7 |
| 2 | 22u | Capacitor_SMD:C_0805_2012Metric | C9, C10 |
| 2 | 27 | Resistor_SMD:R_0805_2012Metric | R8, R9 |
| 2 | 47p | Capacitor_SMD:C_1206_3216Metric | C5, C6 |
| 2 | Conn_01x15_Pin | Connector_PinHeader_2.54mm:PinHeader_1x15_P2.54mm_Vertical | J1, J2 |
| 2 | MMBT2222A | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 2 | SW_MEC_5E | sources:SW_1825910-6-4 | SW1, SW3 |
| 2 | ~ | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1, JP2 |
| 1 | 10u | Capacitor_SMD:C_1206_3216Metric | C3 |
| 1 | 1u | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | 2k | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | 5.1k | Resistor_SMD:R_1206_3216Metric | R3 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U4 |
| 1 | ESP32-C3-WROOM-02 | RF_Module:ESP32-C3-WROOM-02 | U3 |
| 1 | FT231XS | Package_SO:SSOP-20_3.9x8.7mm_P0.635mm | U2 |
| 1 | LED | LED_SMD:LED_0805_2012Metric | D5 |
| 1 | LED | LED_SMD:LED_1206_3216Metric | D4 |
| 1 | USB_C_Receptacle_USB2.0_14P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J3 |
Questions
What parts does the Riscy use?
36 parts, built around the ESP32-C3-WROOM-02-H4, FT231XS-R, AMS1117-3.3 and MMBT2222A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Riscy KiCad files?
From the siliwho/Riscy repository on GitHub, at the commit this page was made from: the board is riscy.kicad_pcb and its schematic riscy.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Riscy design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers76 × 22 mm
- 4 layers40 × 70 mm
DAQv3 5
TPierceUCSD/Wireless-motion-capture-data-sycnhronization-system
© 2025 Taylor Pierce, Emerson Noble, Lucas Davis, Jesus Wilkins, Kenneth J. Loh. Licensed under CC BY 4.0.
54 parts - 2 layers68.6 × 53.3 mm
- 4 layers100 × 38 mm
Knob v02-rounded
felop/HapticKnob
Haptic knob inspired by @scottbez1, designed to model different indent shapes
60 partsMIT - 2 layers140 × 140 mm
Mc68k sbc
lokuciejewski/mc68k_unicorn
This SBC was created with one goal in mind - to run UNIX or UNIX-like OS on it. In order to achieve this, the Motorola 68010 had to be chosen since it's the first mc68k family member to support virtual memory (at least…
88 partsMIT - 4 layers96 × 44 mm
Aroma
tristan-yk/Aroma
PCB design files and firmware for multi-channel diffuser driver board.
108 parts - 2 layers126.5 × 83 mm
Pcb pro controller
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
66 parts915