2 layers188.2 × 163.8 mm
2 layers68.6 × 53.3 mm
Arduino Compatible de Fabricacion Española
- Size
- 68.6 × 53.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 105
- Nets
- 69
- Pads
- 351
- Tracks, vias
- 962, 79
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 2 Aug 2016
- Updated
- 14 Nov 2020
Overview
Grape is an open-source printed circuit board by FrizzyElectronics, from the FrizzyElectronics/Grape repository on GitHub. It is a 2-layer board of 68.6 × 53.3 mm with 105 parts on 69 nets, routed with 962 tracks and 79 vias.
It is built around the FT231XS-R, LM358 and AMS1117-3.3, with the FDN340P, 2N7002PW and MBRA140 among its other parts. Its parts include 26 connectors, 21 capacitors, 19 resistors, 5 ICs and 5 diodes. It belongs with the microcontroller boards boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
6
FT231XS-R
SSOP-20-150mil-40℃~+85℃ 125uA 5V 8.4mA USB 2.0 USB to UART SSOP-20-150mil USB Converters ROHSFTDIUSB Converters
LM358
SOP-8-18V~18V 0℃~+70℃ 1.2MHz 10nA 2 24mA 3V~36V 500uA 50nA 5mV 80dB Built-in compensation SOP-8 Operational Amplifier ROHSMSKSEMIOperational Amplifier
AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
FDN340P
SOT-23-55℃~+150℃ 1 P-Channel 1.5V 121pF 20V 2A 500mW 56pF 7.2nC@4.5V 70mΩ@4.5V 779pF P-Channel SOT-23 MOSFETs ROHSonsemiMOSFETs
2N7002PW
SOT-323(SC-70)-55℃~+150℃ 1 N-channel 1.6Ω@10V 2.4V 310mA 310mW 4pF 50pF 60V 800pC@4.5V N-Channel SOT-323(SC-70) MOSFETs ROHSNexperiaMOSFETs
MBRA140
SMA(DO-214AC)-55℃~+125℃ 1 Independent 1A 30A 40V 500uA@40V 550mV@1A SMA(DO-214AC) Schottky Diodes ROHSonsemiSchottky Diodes
README
README.mdGrape
Grape es un Arduino™ compatible de fabricacion y diseño español. Destaca frente a otras placas por su rapidez de conexionado y por no necesitar el uso de protoboard para realizar los proyectos.
Rasgos destacados
- Conexion micro-USB
- Corriente max de salida (5V) 2A
- Pines de conexión rápida
- Interruptor de encendido-apagado
- 8 pines analogicos
- Compatible con los shields de Arduino™ y con Arduino™ IDE
Documentacion
- /Hardware - Archivos de diseño en KiCad e Eagle, esquema en PDF
- /Production - Gerbers, BOM
- /Design - Logos, SVG
Licencia
Este producto es open source!
Por favor, revisa el archivo LICENSE.md para más información.
Si tiene alguna duda acerca del uso de esta licencia contatanos a traves de info@frizzy.es
Parts
105| Qty | Value | Footprint | References |
|---|---|---|---|
| 22 | CONN_01X03 | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm | P1, P2, P3, P10, P11, P12, P13, P14, P15, P16, P17, P18, P19, P20, P21, P22 +6 |
| 9 | 100nF | Capacitors_SMD:C_0805 | C1, C2, C4, C10, C11, C15, C22, C23, C24 |
| 7 | 10k | Resistors_SMD:R_0805 | R3, R14, R15, R16, R17, R18, R20 |
| 6 | 1k | Resistors_SMD:R_0805 | R1, R2, R4, R5, R6, R8 |
| 3 | 100nF | Capacitors_SMD:C_0603 | C5, C6, C13 |
| 2 | 100uF | Capacitors_SMD:CP_Elec_6.3x5.3 | C7, C9 |
| 2 | 27R | Resistors_SMD:R_0805 | R12, R13 |
| 2 | 47pF | Capacitors_SMD:C_0805 | C19, C20 |
| 2 | FDN340P | TO_SOT_Packages_SMD:SOT-23 | Q4, Q5 |
| 1 | 100k | Resistors_SMD:R_0805 | R11 |
| 1 | 10nF | Capacitors_Tantalum_SMD:CP_Tantalum_Case-A_EIA-3216-18_Reflow | C3 |
| 1 | 10nF | Capacitors_SMD:C_0805 | C16 |
| 1 | 10nF | Capacitors_SMD:C_0603 | C14 |
| 1 | 10uH | Inductors_SMD:L_Wuerth_WE-PD2-Typ-L | L1 |
| 1 | 16MHz | Clocks:RESONATOR-SMD-3.2X1.3 | Y1 |
| 1 | 1k 1% | Resistors_SMD:R_0805 | R10 |
| 1 | 1uF | Capacitors_SMD:C_0603 | C12 |
| 1 | 2N7002PW | TO_SOT_Packages_SMD:SOT-323_SC-70 | Q1 |
| 1 | 3.3nF | Capacitors_SMD:C_0805 | C8 |
| 1 | 500mA | Resistors_SMD:R_1812 | F2 |
| 1 | 5K6 1% | Resistors_SMD:R_0805 | R7 |
| 1 | 6.8k | Resistors_SMD:R_0805 | R9 |
| 1 | 60R 100M Ferrite | Inductors_SMD:L_0805 | L2 |
| 1 | AMS1117-3.3 | TO_SOT_Packages_SMD:SOT-223 | U3 |
| 1 | ARDUINO_R3 | Boards:ARDUINO_R3 | J3 |
| 1 | ATMEGA328P_TQFP | Housings_QFP:TQFP-32_7x7mm_Pitch0.8mm | U4 |
| 1 | FT231XS | SMD_Packages:SSOP-20 | U1 |
| 1 | GREEN | LEDs:LED_0805 | LED2 |
| 1 | I2C | Connectors_JST:JST_PH_S4B-PH-K_04x2.00mm_Angled | P23 |
| 1 | LM358 | Housings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mm | U2 |
| 1 | LOGO | Grape:web | G*** |
| 1 | LOGO | Grape:logo_grape | G*** |
| 1 | LOGO | Grape:web2 | G*** |
| 1 | MBRA140 | Diodes_SMD:D_SMA | D1 |
| 1 | MP2307SO | Housings_SOIC:HTSOP-8-1EP_3.9x4.9mm_Pitch1.27mm_ThermalVias_LargeCopper | U8 |
| 1 | POWER_JACKPTH | Connectors:JACK_ALIM | J19 |
| 1 | PURPLE | LEDs:LED_0603 | D4 |
| 1 | RED | LEDs:LED_0805 | LED1 |
| 1 | RESET | Buttons_Switches_THT:SW_Tactile_SPST_Angled_PTS645Vx39-2LFS | S2 |
| 1 | SW_SPDT | Buttons_Switches_SMD:SW_SPDT_PCM12 | SW1 |
| 1 | USB_MICROB | Connectors_USB:USB_Micro-B_Molex-105017-0001 | J1 |
| 1 | YELLOW | LEDs:LED_0603 | D2 |
The 88 most common of 105 parts.
Questions
How big is the Grape PCB?
It measures 68.6 × 53.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Grape use?
105 parts, built around the FT231XS-R, LM358, AMS1117-3.3 and FDN340P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Grape KiCad files?
From the FrizzyElectronics/Grape repository on GitHub, at the commit this page was made from: the board is Hardware/KiCad/Grape.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Grape design in my own project?
Its repository states no licence, so its author keeps all rights: ask FrizzyElectronics before reusing the design.
Similar boards
- 4 layers68.6 × 53.3 mm
- 2 layers62 × 129 mm
Esp32-main
nicolaeandreivasile/bike-embedded-app
Embedded application for bikes that collect and display various riding data.
93 parts1 - 4 layers28 × 34 mm
SmartWatch
Bellafaire/ESP32-Smart-Watch
An open source smartwatch based on the ESP32 compatible with the Arduino IDE.
58 parts258MIT - 2 layers68.6 × 53.3 mm
Sduino uno
roybaer/sduino_uno
A development board with STM8S105K6 MCU in Arduino UNO form factor
51 parts18 - 2 layers101.6 × 53.3 mm
Sduino mb
roybaer/sduino_mb
A development board with STM8S208MB MCU in Arduino MEGA form factor
56 parts4 - 2 layers68.6 × 53.3 mm
- 2 layers126 × 72.5 mm
Projeto I
Carlos9852/Sistemas_Embarcados
Projeto I da disciplina de Sistema Embarcados e Microcontroladores
44 parts