
Rf proto card
Business card combined with an RF prototyping board
- Size
- 85.6 × 54 mm
- Copper layers
- 2
- Thickness
- 0.8 mm
- Parts
- 54
- Nets
- 21
- Pads
- 354
- Tracks, vias
- 50, 366
- Pours
- 34
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 10 Sep 2021
- Updated
- 26 Feb 2025
Overview
Rf proto card is an open-source printed circuit board by siliconwitchery, from the siliconwitchery/rf-proto-card repository on GitHub. It is a 2-layer board of 85.6 × 54 mm with 54 parts on 21 nets, routed with 50 tracks and 366 vias.
Its parts include 6 connectors and 2 ICs. It belongs with the radio and wireless boards of this library.
README
README.mdRF Prototyping/Business Card
We give these out sometimes 🎁
You can use this card to prototype RF circuits. Here's some examples!
The RF specifications of the PCB are as follows:
Licence
This design is released under the Creative Commons Attribution 4.0 International Licence.
This is a human-readable summary of (and not a substitute for) the license.
You are free to:
Share — copy and redistribute the material in any medium or format
Adapt — remix, transform, and build upon the material for any purpose, even commercially.
The licensor cannot revoke these freedoms as long as you follow the license terms.
Under the following terms:
Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.
Notices:
You do not have to comply with the license for elements of the material in the public domain or where your use is permitted by an applicable exception or limitation.
No warranties are given. The license may not give you all of the permissions necessary for your intended use. For example, other rights such as publicity, privacy, or moral rights may limit how you use the material.
Parts
54| Qty | Value | Footprint | References |
|---|---|---|---|
| 28 | R | Resistor_SMD:R_0603_1608Metric | A1, A2, A3, A4, A5, A6, A7, B1, B2, B3, B4, B5, B6, B7, C1, C2 +12 |
| 4 | MountingHole | MountingHole:MountingHole_2.7mm_M2.5_Pad_Via | H1, H2, H3, H4 |
| 4 | gnd | TestPoint:TestPoint_Pad_D1.0mm | TP3, TP4, TP7, TP8 |
| 4 | proto-area | rf-proto-card:proto-area | Z1, Z2, Z3, Z4 |
| 2 | GALI-52 | Package_TO_SOT_SMD:SOT-89-3 | U1, U2 |
| 2 | RF_Shield_One_Piece | RF_Shielding:Laird_Technologies_BMI-S-209-F_29.36x18.50mm | J1, J4 |
| 1 | card-info-gold | rf-proto-card:front-info-gold | FID1 |
| 1 | card-info-white | rf-proto-card:front-info-white | FID2 |
| 1 | sma-a | Connector_Coaxial:SMA_Amphenol_132134-10_Vertical | J2 |
| 1 | sma-b | Connector_Coaxial:SMA_Amphenol_132134-10_Vertical | J3 |
| 1 | sma-c | Connector_Coaxial:SMA_Amphenol_132134-10_Vertical | J5 |
| 1 | sma-d | Connector_Coaxial:SMA_Amphenol_132134-10_Vertical | J6 |
| 1 | vbias-a | TestPoint:TestPoint_Pad_D1.0mm | TP1 |
| 1 | vbias-b | TestPoint:TestPoint_Pad_D1.0mm | TP2 |
| 1 | vbias-c | TestPoint:TestPoint_Pad_D1.0mm | TP5 |
| 1 | vbias-d | TestPoint:TestPoint_Pad_D1.0mm | TP6 |
Similar boards
- 2 layers203 × 26.6 mm

- 2 layers30 × 50 mm

- 2 layers100.1 × 40 mm

32Bit shift register
MaltWhiskey/Mega-Cube
16x16x16 PL9823 Cube with Teensy 4.0 and FlexIO driver
54 parts766 - 2 layers100 × 120 mm

- 2 layers

- 2 layers104.3 × 38.9 mm

- 2 layers

- 2 layers93.8 × 64.2 mm

PiFinder smt
brickbots/PiFinder
A plate solving telescope finder based around a Raspberry PI and RPI HQ Camera
54 parts257GPL-3.0
Questions
How big is the Rf proto card PCB?
It measures 85.6 × 54 mm and has 2 copper layers, 0.8 mm thick.
What parts does the Rf proto card use?
54 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Rf proto card KiCad files?
From the siliconwitchery/rf-proto-card repository on GitHub, at the commit this page was made from: the board is kicad-proj/rf-proto-card.kicad_pcb and its schematic kicad-proj/rf-proto-card.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Rf proto card design in my own project?
Its repository states no licence, so its author keeps all rights: ask siliconwitchery before reusing the design.